Two 120/240 V Outlets Circuitry rated for 20 A 8’ Flexible Power Cord Shrouded Safety Banana Jacks Stable footprint with non-slip feet

On-Off power switch 20 A Circuit Breaker 8’ Flexible Power Cord Outlets – (4) 5-20R   Test Tap:

On-Off power switch 20 A Circuit Breaker Outlets – (2) Universal Test Tap: 3ft.

On-Off power switch 30 A Circuit Breaker Inlet - NEMA L5-30 Outlets – NEMA L5-30R Test Tap:

On-Off power switch 15 A Circuit Breaker Inlet - IEC C14 for use with any cordset Outlets – (8) IEC C13 Test Tap:

On-Off power switch 20 A Circuit Breaker Inlet - NEMA L6-20 Outlets – NEMA L6-20R   Test Tap:

15’ Flexible Power Cord IEC C13 / C14 Connectors Test Tap: 3ft. (2) fork terminals (current)

On-Off power switch 30 A Circuit Breaker Inlet - NEMA L6-30 Outlets – NEMA L6-30R Test Tap:

Precise: 0.5 µm resolution with absolute sensor High Push Force: 2N Low Power: 6 V DC, < 1 A Embedded: Closed-loop positioning Zero power Hold: With rigidity and no jitter

Smallest size: 11.75 x 21.9 x 16 mm including controller Closed-loop controller embedded in micro stage No separate electronics needed 3.3 VDC input Direct input of motion commands (I2C, SPI, UART or analog servo) Angular resolution ~ 0.022 deg closed loop Absolute encoding and position feedback Millisecond step and settle times Point-to-point angular positioning with closed-loop bandwidth ~100Hz Holds position with zero power and no jitter Fast integration for embedded motion in smaller instruments

Smallest rotary stage: 11.75 x 21.9 x 16 mm  Embedded closed-loop controller  No separate electronics needed  3.3 VDC input  Accepts direct motion commands (I2C, SPI, or UART)  Continuous 360° rotary motion  Angular resolution ~21.9727 mdeg closed loop  Built-in absolute position sensor  Millisecond step and settle times  0.5 deg in 16 ms closed loop  0.5 deg in 1.2 ms open loop  Holds position with zero power and no jitter

Tiny “all-in-one” solution: no external control board needed  Superior image quality: sub-micron lens movement with very low tilt. Now with higher dynamic stability  Low voltage & power: 3.3 VDC input, zero power position hold  Simple system integration: accepts high-level motion commands over standard serial interface (I2C or SPI)  Flexible, production-ready system: compatible with M8 to M16 lenses and with typical image formats from 1/3” to 1/1.8”  Lowest cost, fastest time to market: Fully-engineered “plug and play” solution