All-in-one microstage - no separate controller  Direct high-level command interface (I2C or SPI)  USB adapter enables direct connection to PC  Small: < 32x32x11 mm including controller  Absolute encoding: high repeatability, no homing  Low power: 6 VDC, ~5 W (only when moving)  For integration into battery powered devices  Long stroke: 15 mm  High force: 1 N (~100g load vertical, ~200g horizontal)  High stiffness with crossed roller bearing design

Smallest rotary stage: 11.75 x 21.9 x 16 mm  Embedded closed-loop controller  No separate electronics needed  3.3 VDC input  Accepts direct motion commands (I2C, SPI, or UART)  Continuous 360° rotary motion  Angular resolution ~21.9727 mdeg closed loop  Built-in absolute position sensor  Millisecond step and settle times  0.5 deg in 16 ms closed loop  0.5 deg in 1.2 ms open loop  Holds position with zero power and no jitter

Simulator to reproduce various transient surge phenomena which are generated in a vehicle and required in the international standard ISO-7637-2 (2004) Standard, and evaluate the immune resistibility of the equipped electronics devices against the surge. 

A real-time diagnostic tool supports EMC/EMI debugging.  Fast visualize EMC/EMI problems.  Enables easy comparison of countermeasures before and after.  Capable of measurement from entire products to single components.  Factor-editor function provides correction of antenna characteristics, cable loss and preamplifier.  User friendly compact design.  Customer supplied spectrum and probes acceptable (Please consult)

EMC test equipment to evaluate the resistibility of electronic devices and components when energy charged on a human body or object is discharged to the electronic devices and components. NoiseKen brand ESD simulator is available to see malfunctions or function declines of electronic equipment for appropriate evaluations compliant with IEC 61000-4-2 Ed.2 Test Standard, ISO 10605 Ed.2 Test Standard & ISO 10605 Ed.3 Test Standard. 

IEC 61000-4-4 Ed.3 standard compliance.  Pre-check function is installed. Inspection before testing is now easy.  Normal mode test support. Taking account of field troubles is possible. (option)  Utilize an outlet box that simplifies EUT connection. (option)  Compared with conventional products, the size has become compact. (Approximately 67% by volume)  Easy to understand Panel display reduces mistakes in connecting power cables.  Software control with Windows. (option)  Next calibration date can be notified. (Windows software only)  Employ LCD screen with multi-language support and enhanced operability. 

Reproduces transient voltage surge phenomena generated in a vehicle and evaluates the immune resistibility of DUT against the surge. The output waveforms are five as high-repeating pulse, giant pulse, field decay pulse, trapezoidal waveform + high-repeating pulse and high repeating pulse + giant pulse.

This model is for carrying out a high pressure noise test of individual automotive manufacturers' demands. It simulates representative high voltage noise of HV and EV. Single-phase 3 wire  AC85 - 240V16A  50/60Hz  DC125V16A  Pulse: ~ 500V 50kHz (option)

NoiseKen simulators to reproduce fast rise-up noises which are generated when switching ON / OFF electric current on the inductive load.  Since the pulse includes broadband frequency and its rise-up time is fast at 3ns or less, it can make the noise coupling dense and effective to reproduce the malfunctions of electronics equipment under the test.  It can realize performance evaluation of electronics equipment's upon reproduction of line noises which are intruded to the power supply lines or induced noises onto the telecommunication lines.

The TEM horn antenna is an antenna used for conducting close proximity radiation immunity evaluation test (near electromagnetic field immunity test) of electromagnetic waves radiated from various wireless transmitters such as mobile devices.  In the future, close proximity radiation immunity evaluation test using the TEM horn antenna is expected to expand to various product standards such as medical equipment (IEC 60601-1-2) and multimedia equipment (CISPR 35).NoiseKen's TEM horn antenna has a wide band, low VSWR, and wide electric field uniformity offering an ideal solution for an efficient close proximity radiation immunity test. 

Thin plate broadband antenna has been developed for efficient immunity testing against hand-held transmitters and cellular phones. Many pieces of spot frequency antennas had to be used in turn thus fur. This new Thin-plate Broadband Antenna is a single antenna solution eliminating the need for antenna changes and dramatically reducing the test time. Furthermore, this antenna with its small-size and lightweight properties and a flexible handle is suitable for testing in narrow spaces.

Modules are usually smaller and are usually part of systems. You supply your own DC voltage, make the connections and supply your own DC supply. Modules are available with or without heatsinks and fans. Amplifiers Modules are available in both Broadband and Band-Specific frequencies. Modular design concepts save time and money, and are lightweight, reliable, cost-effective solutions. We are well-known in the industry for successfully adapting our amplifiers or custom designing new solutions to suit each unique project. Please refer to our Adapted & Custom Design Solutions link to begin formulating your performance objectives and other criteria.