VTI Instruments - SMP4xxx product family Matrix Switches
The SMP4xxx product family is made up of the SMP4001, SMP4001-S, SMP4002, SMP4003, SMP4004, SMP4005, SMP4006, SMP4007, SMP4028, and SMP4044.
The SMP4xxx product family includes 2 A matrix switches (SMP4001 through SMP 4007), 8 2x8 high-density coaxial matrixes (SMP4028), and 8x20 high-density coaxial matrixes (SMP4044).
VTI's SMIP™ signal switching series revolutionized the automated signal switching marketplace by providing a level of modularity, density, and performance for the VXIbus platform that was unprecedented.
The SMIPII family includes:
- Power (Switching greater than 2 A)
- General Purpose
- Multiplexers/Scanners
- Matrices
- RF
- Relay Drivers, Loads & Digital I/O
Configuring your switch system has never been easier.
Step 1: Start with the SMP1100 or SMP1200 base units.
Step 2: Select up to two switch modules for the SMP1100 or up to six for the SMP1200. Different switch modules can be mixed together for maximum flexibility.
Step 3: Select the appropriate mating connectors
|
SMP4001 |
9 (4x4) 2-Wire Matrices, 2A per Channel |
|---|---|
|
SMP4001-S |
User-defined Matrix, Built from 9 (4x4) Matrices |
|
SMP4002 |
1 (4x36) 2-Wire Matrix, 2A per Channel |
|
SMP4003 |
2 (4x16) 2-Wire and 1 (4x4) 2-Wire Matrices, 2A per Channel |
|
SMP4004 |
1 (8x16) 2-Wire and 1 (4x4) 2-Wire Matrices, 2A per Channel |
|
SMP4005 |
1 (12x12) 2-Wire Matrix, 2A per Channel |
|
SMP4006 |
3 (4x12) 2-Wire Matrices, 2A per Channel |
|
SMP4007 |
2 (8x8) 2-Wire Matrices and 1 (4x4) 2-Wire Matrices |
|
SMP4028 |
8 (2x8) Coaxial Matrix |
|
SMP4044 |
1 (8x20) Coaxial Matrix |
More Product Information
- Eight ports of 8 I/O bits each
- High current capability for control of external relays, 300 mA sink
- Simulate and receive digital data at up to 2 MHz sample rates
- Selectable output voltages range from 3.3 V to 60 V
- Setup outputs and scan inputs as part of EX1200 measurement sequencing engine
- Combine up to 12 fail-safe building blocks, dual SPDT, SP4T, SP6T, or transfer switch in a compact 1U footprint
- Front “pluggable” relays facilitate field maintenance
- Embedded web interface provides interactive utility to monitor and control relays from anywhere in the world
- Flexible API supports IVI and Linux development environments minimizing software investment
- LXI Trigger Event implementation provides seamless test synchronization with external devices
- Store up to 128 relay state configurations for quick recall, including an automatic power up state
- Define exclude lists to avoid setting an undesirable configuration
- Relay odometer tracks closures to facilitate preventative maintenance
- High power density in 1U / 2U / 4U / 14U chassis up to 18kVA
- Intuitive touch panel control
- Innovative iX2™ current doubling technology
- Multi-language display for global operation
- Auto paralleling for higher power
- Single phase 1U models and 1 or 3 phase selectable 2U / 4U / 14U models
- Complete avionic test suites (optional)
- ATE version available in 1U, 2U and 4U models
- Standard LXI LAN, USB and RS232, optional GPIB
- Legacy CSW5550 Emulation on the AST6003A1 Model
- Typical accuracies of ±0.20°C
- 16-channel isolated universal thermocouple/voltage inputs
- Power over Ethernet+ (PoE+)
- 20K samples/second/channel sample rate
- 24-bit ADC per channel
- 500 V channel-ground isolation
- 1000 V channel-channel isolation
- Data logger acquisition mode
- Built-in parallel data streaming
- Full-featured embedded web interface
- LXI Ethernet interface
- 8-bit bank isolated digital I/O
- Compact 1U half-rack form factor
- 8 frequency counter channels, 16 isolated digital I/O channels, 2 isolated DAC channels in a single card
- Single frequency measurement range that works from 0.05 Hz to 1 MHz
- Very stable TCXO base clock, 50 MHz ±1 ppm
- 195 kΩ Input impedance with selectable coupling (AC/DC)
- Wide differential input voltage range (±48 V) with up to 250 V working common mode voltage
- Programmable threshold and hysteresis levels with 1 mV resolution
- Support for quadrature encoder
- Isolated DIO channels with up to 60 V compliance
- Isolated and independent 16-bit DAC channels, configurable for voltage or current output
RF/Coax switching modules up to 26 GHz for high frequency and communication switching needs
The SMP3xxx product family is made up of the SMP3001, SMP3001DS, SMP3002, SMP3005, SMP3620 (pictured), and SMP3625.
- Highest resolution – 12 bits all the time
- More capability – integrates multiple instruments into one
- Comprehensive probe support – supports over 30 probes in 9 categories
- MAUI with OneTouch user interface for intuitive and efficient operation
The LXI mainframes family includes 2-slot, half-rack LXI switching and data acquisition mainframes (EX1202/EX1262), 16-slot, 3U LXI switching and data acquisition mainframes (EX1208A and EX1208B, pictured), and 6-slot, 1U LXI switching and data acquisition mainframes (EX1206A).
VTI Instruments
VTI Instruments, an AMETEK Programmable Power brand, provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time. A sustained focus on innovation and technology enables customers to optimize their capital investment through product longevity, while ensuring unmatched measurement integrity and data reliability.
VTI Instruments has customers in over 30 different countries and in a wide variety of industries including aerospace, defense, power generation, automotive and consumer electronics.
Contact Details
AMETEK Programmable Power, Inc. (VTI Instruments) − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries
Test & Measurement
Download Line Card
Document
