Linea line scan cameras deliver the performance and features usually found in high-end cameras at an attractive price point. Based on advanced CMOS line scan technology, Linea GigE cameras have a 2k or 4k single line 7.04 µm x 7.04 µm pixel array. With excellent sensitivity and speed, Linea surpasses the requirements of demanding applications —such as materials grading and inspection, transportation safety, and general purpose machine vision.

The PPE6KV-A and HVP120 can handle up to 6000 Vpeak transient overvoltages and are designed for probing up to 2000 Vrms and 1000 Vrms respectively. Fast rise times, excellent frequency response, and a variety of standard accessories make these probes safe and ideal for high voltage measurement applications

The brand new Linea2 family takes your system to the new level with impressive performance and value, offering 5x the bandwidth of our Linea family with a 5GigE interface. The Linea2 line scan cameras are powered by our very own Teledyne quadlinear sensor, extending detection capability using RGB + NIR multispectral imaging technology.

With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.

• Vector Network Analyzer Frequency Range from 10 MHz up to 3.2 GHz 
• Spectrum Analyzer Frequency Range from 9 kHz up to 3.2 GHz 
• -156 dBm/Hz Displayed Average Noise Level (Typ.) 
• -98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.) 
• Total Amplitude Accuracy < 1.2 dB 
• 1 Hz Minimum Resolution Bandwidth (RBW) 
• All-Digital IF Technology 
• Standard Preamplifier 
• Distance to fault capability using VNA time domain analysis 
• Up to 1.5 GHz Tracking Generator Kit 
• Built-in Advanced Measurement capability (CHP, ACPR, OBW, CNR, TOI, etc) 
• 10.1 lnch WVGA (1024 x 600) Display

• Four operating modes: – CC, CV, CR, CP
• Static, Dynamic and Sequence mode support
• Built in Application Functions - Short Circuit Test, Battery Test Mode, CR-LED Mode, OCP and OPP Test 
• Provides a load of up to 300 Watts
• Programmable and analog external control

• S-parameters DC to 40 GHz, single-ended and mixed-mode 
• Impedance Profile with <1 mm resolution, differential and common-mode 
• Internal, automatic OSLT calibration 
• USB-connected, small, lightweight 
• Flexible display of the measurements 
• Remove effects from fixtures, connectors and cables 
• Emulate eye diagrams with CTLE, DFE and FFE equalization 
• Advanced jitter analysis

• Available in 30MHz, 40MHz, 60MHz, 80MHz, 120MHz, 200MHz, 350MHz and 500MHz models
• All models feature 2 channels
• Max Sampling rate of 150 Msa/s (30MHz & 60 MHz) 1.2 Gsa/s (40MHz, 80MHz, 120MHz) and 2.4 Gsa/s (200MHz, 350MHz and 500MHz) models.
• Up to 16-bit vertical resolution (14-bit on 30MHz & 60MHz models).
• All models have 4.3" Touchscreens.
• Excellent analog and digital modulation types available (AM, DSB-AM, FM, PM, PSK, FSK, ASK and PWM)

• Highest resolution – 12 bits all the time 
• More capability – integrates multiple instruments into one 
• Comprehensive probe support – supports over 30 probes in 9 categories 
• MAUI with OneTouch user interface for intuitive and efficient operation