Teledyne DALSA - Prime BSI Back-Illuminated sCMOS with Low Read Noise
- Backside sensor illumination
- 95% quantum efficiency
- 63 fps imaging speed
- Balanced 6.5 μm pixels
- Low 1.0 e- read noise
- CMS mode for low noise imaging at high speeds
- High dynamic range
- Programmable scan mode to control camera readout, ideal for light sheet
The Prime BSI sCMOS is a back-illuminated camera designed to provide a balance between high resolution imaging and sensitivity, with the combination of a 6.5 µm pixel and near-perfect 95% quantum efficiency making it an ideal solution for a range of applications. Also featuring CMS mode for ultra-low read noise of 1.0 electrons!
Sensitivity
The Prime BSI back-illuminated sCMOS camera achieves a near-perfect 95% quantum efficiency. By bringing the light in from the back of the sensor, photons land directly onto the light receiving surface, maximizing light collecting capability. The Prime BSI combines 95% quantum efficiency with a low 1.0 e- read noise to deliver the most sensitive camera based on sCMOS technology at over 40 frames per second.
Resolution and Pixel Size
The Prime BSI features 6.5 μm pixels, the accepted standard for most live cell applications using 40x and 60x magnification. This pixel size provides highly detailed images across the imaging plane and is most suitable for the broadest range of microscope objectives.
Superior Background Quality
The Prime BSI features Pattern Noise Reduction Technology and Correlated Noise Reduction Technology to ensure that it delivers clean, pattern free images with minimal pixel defects, delivering improved image quality in low light conditions.
Advanced Triggering
Programmable Scan Mode provides increased control over the rolling shutter exposure and read-out functionality of CMOS sensors for applications that require control over the line time.
Sequenced Multiple Acquisition Real Time Streaming (SMART) Streaming enables the Prime BSI to capture a continuous sequence of images while cycling through 16 pre-programmed exposure time values, delivering the fastest multi-channel acquisition times.
Advanced Features
The Prime BSI offers PrimeEnhance active denoising which provides a real-time quantitative increase in the signal to noise ratio to maximize sensitivity at ultra-low light levels.
Family Specifications
|
Sensor Technology |
sCMOS |
|---|---|
|
Quantum Efficiency |
95% |
|
Pixel Size |
6.5 µm x 6.5 µm |
|
upported Interfaces |
PCIe and USB 3 |
|
Spectrum Capabilities |
UV (200-440 nm), Visible (400-700 nm), Near Infrared (700-1000 nm) |
|
Read Noise (Median) |
1.0 e- |
Models
|
Model Number |
MP |
FPS |
Pixel Size (μm) |
QE |
Read Noise |
Sensor |
|---|---|---|---|---|---|---|
|
4.1 |
63 fps |
6.5 µm |
95% |
1.0 e⁻ |
GPixel Gsense 2020BSI |
|
|
4.1 |
63 fps |
6.5 µm |
95% |
1.0 e⁻ |
GPixel Gsense 2020BSI |
More Product Information
- 2,048 pixels CMOS monochrome line scan sensor
- Pixel size available in 2 versions: 10 μm x 20 μm and 10 μm x 200 μm
- Pixel full well capacity available in two versions: 140 ke- and 200 ke-
- CameraLink (base, medium, full) or USB3 interface
- Line rate available in 4 versions: up to 20 kl/s, 80 kl/s, 130 kl/s and 250 kl/s
- Bit depth: 10, 11 and 12 bits
- Configurable region of interest
- Sensor package available in two versions: ceramic and organic
- Power supply: 10 to 15V DC. PoCL compliant
- Low power consumption: <3W
-
Monochrome (G-131B) and color (G-131C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
The COSMOS is the only large format, high performance CMOS camera designed and manufactured entirely within a single source. With LACera technology, the COSMOS offers superior sensitivity, large imaging area, low noise and fast frame rate.
- High signal fidelity to 4 GHz bandwidth
- Low circuit loading – High input impedance and low capacitance
- 4 GHz, 2.5 GHz, 1.5 GHz and 1 GHz models
- 1 MΩ input resistance
- 0.6 pF (4 GHz) and 0.9 pF input capacitance
- ± 8 V input dynamic range, ± 12 V offset range
- Wide variety of tips and grounds
- Easy to use, integrated with oscilloscope
- Highest resolution - 12 bits all the time
- Bigger Display, smaller footprint, most bench space
- More capability, increased productivity
- True Differential TDR with <3mm Spatial Resolution
- Small Form Factor and Battery Powered
- S Parameters up to 15 GHz
- 35 ps Rise Time
- Up to 50,000 points long memory
- Emerging Serial Data Standards Testing
The Blackfly® S leverages the industry’s most advanced sensors in an ice-cube form factor. It is packed with powerful features enabling you to easily produce the exact images you need and accelerate your application development. This includes both automatic and precise manual control over image capture and on-camera pre-processing. The Blackfly S is available in GigE, USB3, cased, and board-level versions.
The Blackfly S currently has a lead time of four weeks or less. Get the cameras you need – when you need them.
- ~120-1100 nm sensitivity
- -90℃ deep cooling
- Support for CCDs of varying sizes
- Flexible readout design
- Compact and Lightweight - The Dragonfly S camera has a compact form factor and lightweight design, making it ideal for embedded or handheld devices with space constraints. The fully enclosed models are Class B EMC safety compliant, restricting electromagnetic interference in your application.
- Flexible Camera Configurations - The Dragonfly S is available in multiple configurations to suit a wide variety of applications, from board-level to fully enclosed in a lightweight aluminum case. The USB connector is available in back or side orientation, and its locking mechanism provides a secure connection. These features provide maximum flexibility and durability, allowing seamless integration into any setup.
- Reliable Image Delivery - The Dragonfly S camera comes equipped with a large onboard memory that ensures every captured image frame is transferred to the host without any loss, in a single or multi-camera setup
Teledyne DALSA
Teledyne DALSA is an international leader in high performance digital imaging and semiconductors with approximately 1000 employees world-wide. Established in 1980 and acquired by Teledyne Technologies in 2011, Teledyne DALSA designs, develops, manufactures, and markets digital imaging products and solutions, in addition to providing semiconductor products and services. Our core competencies are in specialized integrated circuit and electronics technology, software, and highly engineered semiconductor wafer processing.
Teledyne DALSA exists for the long term. Our goal is to build upon our 30 year heritage of developing the world's leading high performance digital imaging and semiconductor solutions and to accelerate our level of innovation. We focus on R&D development but also draw on the capabilities available to us as part of a larger organization. We seek to deliver products and technology that are truly innovative so that we can help our customers succeed.
Contact Details
Teledyne DALSA Headquarters
605 McMurray Road, Waterloo, Ontario, Canada N2V 2E9
Phone: 519-886-6000
Fax: 519-886-8023
Imaging/Machine Vision
Download Line Card
