-
Our White High Intensity Linear Backlights offer 540 kLux output, perfect for back-lit, line-scanning applications.
-
Available in pre-engineered sizes from 6” (152mm) to 96” (2438mm) in 6″ increments.
-
A 3″ (75mm) length option is also available. Available intensity control provides illuminance adjustability for every 6″ increment via a 0 – 10v input.
-
Available in white only. For additional wavelengths please refer to our BL138 series.
Sorensen - XEL Series - 75W - 180W User-friendly 90W Linear Benchtop Supply
- Ideal for engineering lab use
- Digital features with analog controls
- Remote control for bench, system & ATE applications.
- "P" models have RS-232, USB & LAN (LXI compliant, class C) standards.
- S-Lock: Set and lock the voltage.
- V-Span: user-defined voltage limits
- Small benchtop footprint
The Sorensen XEL linear benchtop power supply is as easy to use as simple analog power supplies but offers the flexibility of advanced digital features. The user interface allows easy control with single-turn knobs including a fine control knob for voltage.
This easy-to-use interface is complemented by V-Span, S-lock, and Output Enable functions.
V-Span allows the user to set a maximum and minimum value over which the knob control operates. This provides more precise control over the voltage as the knob operates over a narrow range as well as protecting devices under test by limiting the maximum voltage.
S-Lock provides an easy method to output a regulated fixed voltage.
Output Enable lets the user set up the desired voltage and current levels prior to turning on the output. All these features in a laboratory bench supply are only found in the XEL series linear benchtop power supply.
The programming "P" models include LXI Class C Ethernet, USB, RS-232, and analog remote control. The option "GP" includes GPIB programming plus all the interface methods included with the "P" models described above. This remote programming capability makes the XEL-P models well-suited for system or ATE integration.
At 4.2x11.3 inches (108mm x 287mm), the XEL series occupies the least benchtop space of any programmable DC power supply. The dual output model offers 90W per channel, also in a compact 8.4x11.3 inches (216mm x 287mm).
The dual output XEL30-3D is two 30V/3A power supplies in one unit. All the features of the single output version are also in the dual output. The outputs are fully independent and isolated. Plus, the outputs can be operated in 4 modes: isolated, tracking, ratio tracking, and true parallel. In addition, the outputs can be enabled (on/off) independently or synchronously.
|
Output : Voltage and Current |
|||||||
|---|---|---|---|---|---|---|---|
|
Output Ratings |
XEL 6-8 |
XEL 15-5 |
XEL30-3 |
XEL60-1.5 |
XEL30-3D |
XEL 120-0.75 |
XEL 250-0.37 |
|
Voltage (VDC) |
0-6 |
0-15 |
0-30 |
0-60 |
0-30 |
0-120 |
0-250 |
|
Current (ADC) |
0.1mA - 8A |
0.1mA - 5A |
0.1mA -3A |
0.1mA -1.5A |
0.1mA -3/6A* |
0.01mA -750mA |
0.01mA -370mA |
|
Power (W) |
48 |
75 |
0-90 |
90 |
90/180 |
90 |
90 |
|
Output Performance** |
|||||||
|---|---|---|---|---|---|---|---|
|
Feature |
XEL 6-8 |
XEL 15-5 |
XEL30-3 |
XEL60-1.5 |
XEL30-3D |
XEL 120-0.75 |
XEL 250-0.37 |
|
Voltage Meter |
4-digit meter |
||||||
|
Accuracy |
0.1% + 10mV |
||||||
|
Resolution |
10mV |
||||||
|
Current Meter |
4-digit meter |
||||||
|
Accuracy |
0.3% + 3mA |
0.3% + 3mA |
0.3% + 3mA |
0.3% + 3mA |
0.3% + 3mA* |
0.3% + 0.3mA |
0.3% + 0.3mA |
|
Resolution |
1mA |
1mA |
1mA |
1mA |
1mA |
0.1mA |
0.1mA |
|
Low Current |
<500mA |
||||||
|
Accuracy |
0.3% + 0.3mA |
||||||
|
Resolution |
0.1mA |
||||||
|
Voltage Ripple |
0.4 mVRMS |
||||||
|
Voltage Noise |
2 mVpp |
||||||
|
Current Ripple |
< 0.2 mARMS (< 40 μARMS on 500 mA range) |
||||||
|
Load Regulation |
|
|---|---|
|
Voltage |
0.01% + 4.5mV with remote sense up to 0.5V line drop |
|
Current |
0.01% + 500μA (line resistance <0.5ohms with remote sense) |
|
Line Regulation (10% line change) |
|
|---|---|
|
Voltage |
0.01% + 2.0mV |
|
Current |
0.01% + 250μA |
|
Transient Response |
<50μs to within 50mV of setting (90% load change) |
|
Common |
|
|---|---|
|
AC Input |
115 VAC or 100VAC or 230VAC ± 10%, 50/60Hz |
|
Power |
280VA maximum |
|
Operating Temperature |
5-40 °C, 20-80% RH |
|
Storage Temperature |
-40 to +70 °C |
|
Weight |
9.9 lbs. / 4.5 kgs, XEL30-3D: 18.8 lbs. / 9 kgs |
|
Size (WxHxD) |
4.2x5.2x11.3 inches / 107x131x288 mm, XEL30-3D: 8.4x5.2x11.3 inches / 214x131x288 mm |
* Current accuracy in parallel mode = 0.5% + 3mA
More Product Information
-
High SNR mode (up to 24 dB better signal-to-noise ratio)
-
Low-noise binning mode
-
Shading correction
-
Defect pixel correction
-
Area of interest (AOI), separate AOI for auto features
-
Binning
-
Sub-sampling
-
Auto gain (manual gain control: 0 to 24.4 dB)
-
Auto exposure (48 µs to 67 s)
-
Auto white balance
-
Look-up table (LUT)
-
Hue, saturation
-
Color correction
-
Local color anti-aliasing
-
Reverse X/Y
-
Deferred image transport
-
Trigger programmable, level, single, bulk, programmable delay
-
Sequence mode (changes the camera settings on the fly)
-
SIS (secure image signature, time stamp for trigger, frame count etc.)
-
Storable user sets
Scope of delivery
-
Camera and IEEE 1394b cable (other configurations on request)
- Eight ports of 8 I/O bits each
- High current capability for control of external relays, 300 mA sink
- Simulate and receive digital data at up to 2 MHz sample rates
- Selectable output voltages range from 3.3 V to 60 V
- Setup outputs and scan inputs as part of EX1200 measurement sequencing engine
- Industry Leading Power Density – Up to 1500 Watts in 1U
- Standard Digital Interfaces – USB&RS232/485
- LXI Ethernet and Isolated analog interfaces
- Power Factor Correction-PFC and universal AC input
- “Green” Sleep Mode – Automatically “sleeps” after period of non-use
- Built in sequencing - Unload your system controller
- Programmable fold-back protection delay
- Dual Voltage ranges that support over voltage testing on 480V based systems
- Instrument Setups for quickly re-establishing the known instrument state
- 500uS time resolution for Transients
- Virtual Panels control software included
- Non-Linear current waveform programming during Load mode
- Phase coordination among multiple units (LKM/LKS)
- Powerful set of analog controls for PHIL and Modulation tests
- Trigger In & Out to permit extensive coordination with external systems
- Extensive Onboard diagnostics
- Digital I/O, including RS232, USB, Ethernet (GPIB optional)
- Intuitive 5” color display for ease of navigation
- Auto-paralleling for maximum flexibility with multi-chassis configurations
- Separate terminal blocks for single-phase and three-phase AC outputs
-
Defect pixel correction (on/off)
-
Fixed pattern noise correction (on/off)
-
Region of interest (ROI)
-
Gain (manual control, 0 to 20 dB)
-
Exposure (manual control, 44.2 µs to 1.4 s)
-
Gamma correction
-
Reverse X
-
DeviceLinkThroughputLimit (easy bandwidth control)
-
Sync out modes: Waiting for a trigger, exposing, readout, imaging
-
Storable user sets
- Four operating modes: – CC, CV, CR, CP
- Static, Dynamic and Sequence mode support
- Built in Application Functions - Short Circuit Test, Battery Test Mode, CR-LED Mode, OCP and OPP Test
- Provides a load of up to 300 Watts
- Programmable and analog external control
- High Power Density: Up to 15 kW in 3U, 30 kW in a 6U chassis
- Wide Voltage Range: 0-10V up to 0-1000V, from 4 to 30 kW
- Fast Load Transient Response: Protection from undesired voltage excursions
- Low Ripple and Noise
- Intuitive Touch Screen Display
- Parallelable up to 150 kW
- Sequencing: Free system controller & speed up test
- Low audible noise: Temperature controlled variable speed fans
-
Monochrome (G-131B) and color (G-131C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
AMETEK Programmable Power
Located in San Diego, California, AMETEK Programmable Power designs, manufactures, and markets precision, AC and DC programmable power supplies, electronic loads, application specific power subsystems, and compliance test solutions for customers requiring and valuing differentiated power products and services. Also part of our business is VTI Instruments, which delivers precision modular instrumentation and systems for electronic signal distribution, acquisition, and monitoring, used in the world's most demanding test applications.
AMETEK Programmable Power boasts one of the industries' broadest portfolios of programmable power products under the well-known and respected Sorensen, Elgar, and California Instruments brands. AMETEK Programmable Power’s products serve a wide range of stimulus (T&M) and process power needs in applications including semiconductor fabrication, commercial and defense ATE, oil exploration, solar array and battery string simulation, avionics, general R&D and EMC compliance testing.
VTI Instruments provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time.
With strong brands, a broad product portfolio, exceptional precision power conversion and control expertise, proven power system integration capabilities and deep applications knowledge, AMETEK Programmable Power is your source for programmable power supplies, precision data acquisition instruments, and more.
Contact Details
AMETEK Programmable Power, Inc. − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries
Test & Measurement
Download Line Card
Document
