• The LL158 Series produces an oblique (30°) line of illumination for line scan applications in a passively cooled design. 
• When oriented across a moving web or conveyor line, unlike standard line lights, this linear light’s unique geometry highlights engraved or raised lines that run parallel to the material travel. 
• Provides an intensity level of 53kLux (working distance of 75mm). 
• Pre-engineered for expandability in 6” (152mm) increments up to 90” (2.28m). 
• Available intensity control provides illuminance adjustability for every 6″ increment via a 0 – 10v input.

• This DCS Series Controller provides Lighting Control Flexibility in a slim 112 mm x 124 mm x 23 mm package. 
• Plug-n-Play compatibility with Ai lighting Products, featuring SignaTech™ technology. 
• Seamless switching from continuous-on to gated on/off and strobe overdrive; 3 independently configurable trigger inputs. 
• Din-rail mount, UL 508a Panel listed and GUI, Web Browser or command line setup and control tools, SDK. 
• 1 output, 3 channels – designed to drive multi-channel RGB / segment lights, as well as single higher current draw lights.

• The RL1424 is characterized as a Small Aimed Bright Field ring light. 
• Precisely aimed LEDs provide a level of lighting control not found in traditional illuminators. 
• A range of standoffs and fields of view may be specified at the time of order. 
• The RL1424 is available in a wide range of wavelengths from UV to IR. 
• Diffuser and polarizer options are also available. 
• The large inner diameter of the ring light can accommodate lenses up to 55mm in diameter. 
• The light can also be ordered with a variety of mounting options.

Our “A” and “W” Series amplifiers have the power to deliver all the field strength you need. With unsurpassed mismatch capabilities and excellent flatness, they provide all the power promised over the entire operating band. 

We subject our amplifiers to the harshest conditions just to make sure they give you reliable service and performance over the long haul. We test them under various output VSWR loads to stress them to the limit. The only problem we ran into was that there were no available loads to handle the enormous power up to 80,000 W that our amplifiers deliver. Whereas this would stop most manufacturers, it presented another challenge to our talented designers, and we designed our own. All our RF solid-state amplifiers have modulation capability that will faithfully reproduce AM, FM or Pulse Modulation appearing on the input signal for use in the most demanding EMC applications. 

These technologically advanced amplifiers perform beyond the norm, beyond expectations, and way beyond the abilities of other test amplifiers. 

These self-contained, broadband, completely solid-state amplifiers are designed for applications requiring the ultimate in output power over a wide instantaneous bandwidth with high gain. Extensive control and status reporting capabilities are available both locally and remotely. Most models feature air-cooled designs while some higher power units feature liquid cooled designs. The touch-screen panels are intuitive, convenient, and easy to use.

• The I3 and I3S Inline Controllers provide overdrive strobe and continuous operation to lights from a small package when larger, more versatile external controllers are not necessary. 
• Switching between continuous-on, gating on/off and strobe overdrive is seamless. The I3 and I3S employ Ai’s exclusive Adaptive OverdriveTM that optimizes strobe power regardless of input Pulse Width. 
• The I3 is a default-on device on power-up, whereas the I3S is a default-off device, requiring a trigger to illuminate. 
• All ICS models employ reverse input polarity protection. 
• Provides continuous-on and DC gating on/off control as well as 0-10 volt analog dimming. 30 uSec response time. 
• A wash down version of all ICS drivers is provided automatically with any wash down light to which it is attached. 
• 0 – 100% Intensity Control with optional DCS-MP, purchased separately, will provide manual intensity control via an external potentiometer.

• High dispersion for reflective surfaces and shorter working distances. 
• Provides a narrower and less intense illumination area than the AL116. 
• IP65 compliant washdown option is available, as are a wide spectrum of wavelengths. 
• Available with polarization and diffusion light conditioning. 
• This expandable compact bar light is pre-engineered for custom lengths in 2″ increments up to 40″.

• Part of the MicroBrite™ family of high performance, compact machine vision lights. 
• This line light series utilizes a fresnel lens for a compact form factor. 
• Provides an intensity level of 189kLux (working distance of 75mm) 
• Expandable in 50mm increments up to 750mm