NoiseKen - ESD simulators - ESS-S3011A & GT-30RA

EMC test equipment to evaluate the resistibility of electronic devices and components when energy charged on a human body or object is discharged to the electronic devices and components. NoiseKen brand ESD simulator is available to see malfunctions or function declines of electronic equipment for appropriate evaluations compliant with IEC61000-4-2 Ed.2 Test Standard & ISO 10605 ed.2 standards.
The ESS-S3011A features a function which enables the user to pre-program test settings to minimize setup errors as well as having the unit be incorporated into a remote or autonomous testing setup. Another feature that sets apart NoiseKen ESD guns to that of competitors is the discharging gun separation design which helps achieve the lightweight.
For conventional ESD guns, that have generators that are inseparable from the gun, you may experience having to replace the whole unit even only when certain parts of the unit are broken. However, with the NoiseKen’s separation design, replacement parts can be minimized to lower the running cost.

Polarity Positive / Negative
Output voltage 0.20kV~30.0kV±5%(30.5kVmax

~ 10.0kV : 0.01kV step ̃30.0kV : 0.1kV step
Repetition cycle 0.05s ~ 600s±10% / Manual

Set step : 0.1s (0.1 ~ 9.99s), 0.10s (10.0 ~ 600.0s)

Set step : 0.1s (0.1 ~ 9.99s), 0.10s (10.0 ~ 600.0s)0.05s̃99.9s±10% / Manual

Set step : 0.05s (0.05̃10.0s), 0.10s (10.0̃99.9s)
No. of time of discharge 1~60,000 times, Preset 1 time step or continuous preset1~60,000 times, Preset 1 time step or continuous preset1̃60,000 times, Preset 1 time step or continuous preset
Discharge mode Contact discharge / Air discharge
Radiation level mode NORMAL mode / EXTRA mode
Trigger mode Gun trigger / Main trigger / External trigger
Operation panel Color LCD / Push-buttons (Partially lighting)
Gun holder Standard attached (to hold the discharge gun Model GT-30R)
Radiation mode select switch Extra / Normal switching function built-in
Discharge detection Discharge detection function in air-discharge equipped
Pre-checking function "Following 3 steps function equipped

(by user operation. Not the calibration but just checking)

SETP1: High voltage output checking

STEP2: Withstanding voltage checking

STEP3: Discharge relay operation checking"
CR & Gun head checking CR constant and gun head recognizable

(with an indicator to prevent the wrong combination)
"IEC STANDARD" test mode Contact discharge mode : 2.0kV, 4.0kV, 6.0kV and 8.0kV step

Air discharge mode : 2.0kV, 4.0kV, 8.0kV and 15.0kV step
"MANUAL" test mode Contact / Air discharge mode, Arbitrary setting during 0.2kV~30.0kV

Sweeping function built-in, Recordable up to 99 units
"SEQUENCE" test mode "Enables to operate units set in MANUAL mode continuously.

Max. 22 steps / 1 program and the programs recordable up to 20. "
Warning lamp Lighting at voltage output from the generator. Blinking at electro-static discharging
Charge capacitor / resistor 150pF±10%, 330Ω±10% (Built-in CR unit for discharge gun GT-30R)
Charge resistor in generator 10MΩ (Totally 53Ω in combination with 43MΩ in discharge gun)*
AUX connector D-SUB 15pins female connector

(for connecting to patolight, automated ESD eliminator, external interlock input, external trigger input terminal)
Optical communication connector Optical connector (serial interface) for connecting to PC
Power supply /consumption AC100V~AC240V 50Hz/60Hz ±10% 75VA
Dimension "Generator : (W)392mm X (H)312mm X (D)295.3mm( including gun holder)

Discharge gun : (W)83.3mm X (H)217.2mm X (D)229.3mm"
Mass Generator : Approx. 7.5kg

Discharge gun : Approx. 800g (excluding cable and connector)
  • The constant depends on combination with CR units for the discharge gun.
  • The software is scheduled to be downloaded freely from our web-site (The connection cable is necessary in addition).
  • C (Capacitor) and R (Resistor) for the discharge gun is one-body unit.
  • ISO 10605 compliant test can be realized with the optional parts in addition.
  • "3 pre-checking function" to make sure the more confirmable test
  • "CR constant indicator" to make sure the correct unit attachment
  • "One-touch exchange" of its gun head and CR unit realized
  • "Ten-key & Rotary knob" to ease the settings.
  • "Infra-red Remote Controller" to realize the setting remotely from the generator (Standard attached).
  • "Discharge Detecting Function" to realize the air-discharge confirmation.
  • "Lightest discharge gun in the market" to lighten the continuous operation (Excluding the cable and connector)
  • "White LED Irradiator" to facilitate the visualization of the discharging areas.
  • "Control Software" to enable the test result reporting and control with the PC.

More Product Information

NoiseKen

For over 40 years from its foundation in 1975, Noise Laboratory has been focusing on immunity test equipment and related solutions. 

Now their product lines include various types of immunity test equipment ranging from those conforming to IEC 61000-4 series standards, other international or national immunity standards and even to customer's in-house test standards.


Contact Details 

Shinyei Corporation of America Head Office - Sole Authorized distributor of NoiseKen products 

1120 Avenue of the Americas, 4th Floor New York, NY 10036, USA

Phone: 917-484-7884 

Fax: 212-704-4206 

Contact form

Test & Measurement

Download Line Card
NoiseKen - ESD simulators - ESS-S3011A & GT-30RA
NoiseKen - ESD simulators - ESS-S3011A & GT-30RA
NoiseKen - ESD simulators - ESS-S3011A & GT-30RA
NoiseKen - ESD simulators - ESS-S3011A & GT-30RA