Luna - T-Ray® 5000 Series SCS500n Online Sensor CID1
-
Full transceiver functionality
-
Collinear design
-
Solvent resistant lens
-
Safe in explosive environments
-
Use to measure layer thickness
-
Capable of being steam cleaned
The T-Gauge Explosion Proof Thickness Measurement System (SCS500n) takes the robustness of the T-Ray® 5000 to a new level with the ability to operate in flammable atmospheres, such as paint booths or coating facilities.
Designed to be robot mountable and intrinsically safe, the SCS500n is optimized for use in spray booth applications but can be used in other applications as well. The working distance of the sensor head is fixed at 115 mm, but other working distances may be available upon request.
The transmitter and receiver are securely mounted inside a sealed stainless steel housing. The lens is Teflon coated to resist solvents. All components in the hazardous area meet CID1 standards. The SCS500n is ideal for industrial and pilot applications where the transceiver is to be deployed in an explosive environment (paint booth, chemical plant, etc.).
Applications
- Industrial process control: commercial roofing; foam density; coating thickness; plastic extrusion; asphalt shingles
- Nondestructive materials inspection: aircraft; packaged goods; radome inspection; spacecraft; pipeline repairs
- Converting applications: paper coating; multilayer films; tire
More Product Information
-
Up to 450mm measurement range using a 1 mm stainless steel cable
-
Rugged aluminum enclosure with IP65 rating; suitable for outdoor installations
-
Internal protection of connectors/splices
-
Double-ended design supports multiplexing of many gages on one fiber
-
Fully temperature compensated over the entire operating range
-
Fast response time, stable measurements, high resolution
-
High Port Count
-
Rapid Switching Time at 30 ms
-
Low Insertion Loss (< 1.5 dB)
-
Low Wavelength Dependent Loss (< 0.3 dB)
-
O, C and L band operation
-
USB 2.0 Interface
-
Monochrome (G-319B) and color (G-319C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
IEEE 1588 Precision Time Protocol allows for easy synchronization of multiple cameras and devices on network
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
-
Software-driven design allows for field updates for adding new features, capability or modifications due to industry changes
-
ADS-B Target Generator
-
ADS-B squitter encode/decode
-
DO-260, DO-260A and DO-260B data parsing
-
DO-260B canned tests available (option)
-
Generates ATCRBS/Mode S interrogations Multi-receiver test capability (option)
-
UAT TX/RX capability (optional)
-
Pulse and frequency measurement
-
10.4 inch touch screen LCD display for operator control of all test set capabilities
-
Remote controlled via GPIB or Ethernet
-
Two independent transmitters and receivers
-
TX/RX data logging capability
-
Full diversity testing capability
-
Data parsing in engineering units
-
Single measurement, all-parameter analysis
-
Full characterization of components in less than 3 seconds
-
Complete polarization response
-
With single scan, simultaneously measure loss, polarization, dispersion, phase and time domain response
-
Available for C and L band, or O band
-
Designed for the factory and the researcher
-
Robust database structure to ensure continuity of performance
-
Built on embedded operating system to survive power failures
-
Client-server architecture for flexible configuration
-
High-speed data analysis of every waveform
-
Powerful script interface for flexible waveform analysis
-
XML command language for integrating into higher-level control systems
-
Easy to recall analysis recipes stored in the
-
system database
-
Dynamic and absolute measurement of FBGs, LPGs, FP and MZ sensors
-
Up to 16 parallel channels per system
-
Data verification key guarantees only valid output; each data set is calibrated and verified against a permanent NIST traceable reference
-
Proven reliability and longevity, with over 100 million hours logged since 2000
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system cost
-
IEEE 1588 Precision Time Protocol allows for easy synchronization of multiple cameras and devices on network
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba SDK and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
-
High-definition fiber optic sensing (HD-FOS) with sub-millimeter sampling resolution
-
Multichannel measurements - up to 8 channels per system
-
Up to 100 m of high-definition sensing per channel
-
Complete system measures, acquires, logs and communicates real-time data
-
Flexible, lightweight and easy-to-install fiber optic sensors reduce time to first measurement
Luna Innovations
Luna Innovations mission is to help advance the continuing increase in data transmission rates for the public & private communications network with high speed optical receivers and test products, while also leveraging our unique fiber optic sensing technology to improve the structural testing of new composite elements and components in new aircraft and automobiles.
Luna Innovations Incorporated (NASDAQ: LUNA) was founded in 1990 and has been successful in taking innovative technologies from the applied research stage to product development and ultimately to the commercial market. In some cases, the successes led to the creation of independent businesses. We have created companies in our area of focus, sold some of them to industry leaders in their fields, raised private capital, formed joint ventures and entered into a number of licensing agreements.
Contact Details
Luna Innovations Inc.
301 1st Street, SW, Suite 200, Roanoke, VA 24011, USA
Phone: 540-769-8400