AVT - Mako G-508B POL Polarization camera with GigE interface

Overview
Specifications & Details
Datasheets & Downloads
Videos

GigE Vision interface with Power over Ethernet
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
IEEE 1588 Precision Time Protocol allows for easy synchronization of multiple cameras and devices on network
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
Supports cable lengths up to 100 meters (CAT-6 recommended)
Comprehensive I/O functionality for simplified system integration
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter

Manufactured By: Allied Vision Technologies

The new Mako G-508B POL polarizer camera is equipped with a Sony Polarsens™ 5.0 MP IMX250MZR CMOS sensor that incorporates the latest four-directional polarization filter technology. The on-chip nanowire polarizing layer supports four orientations (0°, 45°, 90°, and 135°). Four pixels together build a calculation unit to determine for each pixel the intensity and angle of polarization, similar to the debayering of an RGB or color sensor. By using pseudo-color look-up tables for each angle of polarization defects and areas of stress can be easily visualized. By default monochrome models ship with no optical filter.

Specifications

Interface

IEEE 802.3 1000BASE-T, IEEE 802.3af (PoE)

Resolution

2464 (H) × 2056 (V)

Sensor

Sony IMX250MZR

Sensor type

CMOS

Sensor size

Type 2/3

Pixel size

3.45 µm × 3.45 µm

Shutter mode

Global shutter

Lens mounts (available)

C-Mount, CS-Mount, S-Mount

Max. frame rate at full resolution

23.7 fps

ADC

12 Bit

Image buffer (RAM)

64 MByte

Imaging performance

Imaging performance data is based on the evaluation methods in the EMVA 1288 Release 3.1 standard for characterization of image sensors and cameras. Measurements are typical values for monochrome models measured at full resolution without optical filter and unpolarized light. Contact Sales or AE for more information.

Quantum efficiency at 529 nm

25 %

Temporal dark noise

2.1 eˉ

Saturation capacity

10200 eˉ

Dynamic range

71.4 dB

Absolute sensitivity threshold

2.8 eˉ

Output

Bit depth

12 Bit

Monochrome pixel formats

Mono8, Mono12, Mono12Packed

Operating conditions/dimensions

Operating temperature

+5 °C to +45 °C housing temperature

Power requirements (DC)

12 to 24 VDC AUX or 802.3at Type 1 PoE

Power consumption

2.4 W at 12 VDC; 2.4 W PoE

Mass

80 g (with C-Mount)

Body dimensions (L × W × H in mm)

60.5 × 29.2 × 29.2 (including connectors)

Regulations

CE: 2014/30/EU (EMC), 2011/65/EU, including amendment 2015/863/EU (RoHS)); FCC Class B; CAN ICES-003

Features

Image optimization features:

Auto gain (manual gain control: 0 to 40 dB; 0.1 dB increments)
Auto exposure (exposure time control varies by pixel format)
Binning
Decimation
Gamma correction
One look-up table
Region of interest, separate region for auto features

Camera control features:

Event channel
Image chunk data
IEEE 1588 Precision Time Protocol
Storable user sets
StreamBytesPerSecond (bandwidth control)
Stream hold
Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
Temperature monitoring (main board)
Trigger over Ethernet Action Commands

Applications

Mako G-508B POL is suitable for a wide range of inspection tasks including:

Surface inspection (for example damage, flatness, scratches)
Low-contrast imaging (for example carbon fibre, tires, welding spots)
Material stress detection
Reflection reduced imaging

Quantum efficiency

Quantum efficiency for Mako-G508B POL

Mako G Data Sheet G-508B POL

Allied Vision Camera Line-Up V5.3.2

Mako G QuickStart Guide V1.0.0

Mako G Technical Manual V4.4.5

GigE Features Reference V5.5.0

Camera and Driver Attributes

Modular Concept External V11.7.0 | 2020-Apr-01

Choosing a Machine Vision Camera application note

IEEE1588 PTP for Prosilica GT, GC, Manta, and Mako G cameras application note

Trigger over Ethernet - Action Commands application note

Defect Masking application note

Hardware Selection for Allied Vision GigE Cameras application note

GigE Firmware Update application note

Technical papers, knoledge base

3D CAD files (STEP)

Please right-click the link of a 3D camera model and select save as to download the file. After downloading, unzip the STEP file. You need a 3D CAD viewer application to view and measure the STEP files. Download a STEP viewer free of charge: https://www.freecadweb.org/

Software and firmware

Vimba is our current future-proof SDK.

Other SDKs and tools are available on our Software downloads webpage.

GigE camera firmware is available on our Firmware webpage.

Allied Vision Technologies

https://www.alliedvision.com/en/

For more than 30 years, Allied Vision has been helping people to reach their imaging goals. Allied Vision supplies camera technology and image capture solutions for industrial inspection, medical and scientific imaging, traffic monitoring and many more application areas in digital imaging.

With a deep understanding of customers’ needs, Allied Vision finds individual solutions for every application, a practice which has made Allied Vision one of the leading camera manufacturers worldwide in the machine vision market.

The company has nine locations in Germany, Canada, the United States, Singapore and China and is represented by a network of sales partners in over 30 countries.