IntelliPower - FA10099 Power Conditioner
-
Global Input, Rugged, Rack Mount Double Conversion On-Line Isolated Power Conditioning System with Power Factor Correction
TYPE | SPECIFICATION |
---|---|
Power Rating | 225W |
Chassis Configuration | 2U, ≤23"D |
Input Voltage | 120 or 240 VAC |
Input Frequency | 50/60 |
Input Connector | IEC320 |
Output Voltage | 110 VAC |
Output Frequency | 50/60 |
Output Connector | NEMA Type |
Communication | SNMP |
More Product Information
-
High Temp Frequency Converter, Power Conditioner Rugged Rack Mount Double Conversion On Line with Isolation and Power Factor Correction
-
Complete Test Solutions
-
Complete test solutions for emissions and immunity compliance testing of AC and DC powered products
-
-
Single & Three Phase Operation
-
Offers flexibility
-
-
Direct PC Bus Access
-
Provides high sampling rate and resolution for accurate measurements and high speed data transfers
-
-
PC based harmonic & flicker testing
-
provides real-time full color data display updates and continuous PASS/FAIL monitoring.
-
-
Supports Global Standards
-
Supports European and Japanese standards
-
-
Easy To Use Interface
-
Provides IEC test setup, data analysis, display, MS Word test reports, and data files are generated in MS Excel format
-
-
High resolution
-
Data storage to disk in for post-acquisition analysis and reporting
-
-
Single Step
-
Single Step and Fast Forward replay of recorded test data at 200 mSec
-
-
Low Noise
-
Excellent line/load regulation
-
Remote sense
-
Coarse and fine voltage controls
-
Constant voltage or constant current operation with automatic crossover and mode indication
-
Individual On/Off switch per output (not including fixed output)
-
Variable ( 1.5V to 5V ) Auxiliary Output
-
Shrouded socket-compatible with bare wire and shrouded safety plug connections up to 4 mm
-
2000VA, 1500W, 120/240VAC 50/60Hz Input, 120VAC 60Hz Output, Freq Changer, 12.8V9.6Ah (LiFePO4), 3U20, Steel, IEC-320 C20, RS-232, 4 x NEMA
-
Supports link widths up to 16-lanes
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe 1.0, 2.0 and 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
A top edge 16-lane CEM slot connector accepts all endpoint DUT adapter cards
-
Bottom edge 16-lane PCB finger connector installs into host test system’s 16-lane PCIe slot
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Supports error injection for deep system analysis
-
Interposer power is independent of host system. A 120/220 AC in, 12V/3A DC out converter is included
-
Custom, exchangeable brackets enable secure chassis and endpoint card installations
-
LEDs give quick indication of power and operation
-
Format: Design is based on the 16-lane Card Electro-Mechanical (CEM) specification
-
Size: 230mm deep x 185mm tall x 15mm thick
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
-
2500VA, 2000W, 85 to 265VAC at 50Hz or 60Hz Input with 120VAC at 60Hz Output, Double Conversion, Rugged, High Temperature, Isolated On Line UPS with Power Factor Correction for Military Applications
-
Extended Battery Pack with Extreme High Temperature Batteries
Our “A” and “W” Series amplifiers have the power to deliver all the field strength you need. With unsurpassed mismatch capabilities and excellent flatness, they provide all the power promised over the entire operating band.
We subject our amplifiers to the harshest conditions just to make sure they give you reliable service and performance over the long haul. We test them under various output VSWR loads to stress them to the limit. The only problem we ran into was that there were no available loads to handle the enormous power up to 80,000 W that our amplifiers deliver. Whereas this would stop most manufacturers, it presented another challenge to our talented designers, and we designed our own. All our RF solid-state amplifiers have modulation capability that will faithfully reproduce AM, FM or Pulse Modulation appearing on the input signal for use in the most demanding EMC applications.
These technologically advanced amplifiers perform beyond the norm, beyond expectations, and way beyond the abilities of other test amplifiers.
These self-contained, broadband, completely solid-state amplifiers are designed for applications requiring the ultimate in output power over a wide instantaneous bandwidth with high gain. Extensive control and status reporting capabilities are available both locally and remotely. Most models feature air-cooled designs while some higher power units feature liquid cooled designs. The touch-screen panels are intuitive, convenient, and easy to use.
IntelliPower, Inc.
IntelliPower, Inc., located in Orange, California, has been designing, manufacturing and supporting high-performance, cost effective Uninterruptible Power Systems (UPS) and frequency/voltage conversion solutions to protect mission-critical applications since 1988. IntelliPower’s on-line, double conversion UPS, power conditioner and frequency/voltage converter solutions utilize digitally controlled, high-efficiency power switching technology that has been proven for over 32 years on numerous platforms.
Customers with demanding environments use IntelliPower’s rugged products because of our proven record of providing outstanding solutions. IntelliPower’s in-house development proprietary circuit design, DSP firmware/software technology and wide range of enclosure designs, give IntelliPower unmatched capabilities to deliver systems configured to customer requirements backed by expert support.
Our ability to design and configure quickly is based on our standard proprietary subassemblies that go into variations of our power systems as required. Our product configurator tools and application engineers allow you to easily define your requirements and obtain your proposal for solutions that exactly meet your needs.
Contact Details
IntelliPower, Incorporated
1746 North Saint Thomas Circle, Orange, California 92865, USA
Phone: 714-921-1580
Fax: 714-921-4023
Email: ca-ora-sales@ametek.com
Contact form