IntelliPower -FA00158 External Battery Module
-
6 each 12V8.5Ah batteries within a 2U steel chassis
TYPE | SPECIFICATION |
---|---|
Chassis Configuration | 2U, ≤23"D |
Output Connector | Pigtail |
Battery Runtime | < 20 minutes |
Battery Chemistry | Pb Lead Acid |
Battery Configuration | Fixed |
More Product Information
-
650VA, 500W, 120VAC 60Hz Input and 120VAC 60Hz Output, Frequency Changer, Non-Isolated, Power Factor Corrected, 1/2 Rack Unit, 3U High x 8.5" Wide x 17" Deep, Rugged, Double Conversion, to Provide Power Conditioning and Hot Swap Battery Hold-up for Industrial Applications
-
High Temperature, Double Conversion, Online UPS System with Power Factor Correction, Frequency Conversion and 2 ea. 12V7AH High Temp Batteries for Industrial Applications
-
Provides a passive PCIe® backplane for test applications
-
Self-contained, portable and selfpowered
-
Supplies power for +3.3V, +3.3Vaux and +12V rails
-
Generates PCIe reference clock
-
Accepts external clock inputs
-
Generates valid PERST# bus reset that can be activated by manual push button
-
Includes two mid-bus probe footprints for traffic monitoring
-
Supports two PCIe x16 sockets which accept cards of any link width (x1, x4, x8, x16)
-
Provides indication of valid connection of PRSNT1# and PRSNT2# lines for each card
-
Supports data rates of 2.5 GT/s and 5.0 GT/s
-
IRIG’s A and B and NASA 36 time code inputs
-
+3.3V or +5V signaling
-
1PPS Sync input
-
External Event (Time Tag) input
-
Three programmable pulse rate outputs
-
Match Time output
-
Industrial Temperature Range option
-
Optional on-board GPS option
-
Optional HaveQuick input/output
-
Optional IRIG B time code output
-
1100 VA, 750 Watts, 230 VAC, 50 Hz Input and 230 VAC, 50 Hz Output, Double Conversion, On-Line, Isolated Rugged UPS with Power Factor Correction for Industrial Applications
With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.
-
Easy to operate/calibrate
-
Annual calibration Lightweight / portable
-
Rechargeable battery or externally powered
-
Percent of battery capacity displayed
-
Self-test on power-up
-
Measures DC voltage Manual or Auto Ranging
-
2 and 3 Wire Meggar
-
Compliant with Boeing Spec 10-61959 Rev H
-
MIL-STD-810 Method 511.4 certified
-
Traceable to NIST
-
Tests any AC or DC capacitive fuel, water, LOX/engine oil or other AC capacitive system*
-
2000VA, 1800W, 120/240VAC & 28DC Input & 120VAC, 60Hz Output, Double Conversion, Rugged, High Temperature, Isolated On-Line UPS System with Hot Swap Battery, Frequency Conversion, Power Factor Correction and SNMP Communications
-
2 strings one string of 6ea and one string of 8ea 12V8.5Ah batteries
IntelliPower, Inc.
IntelliPower, Inc., located in Orange, California, has been designing, manufacturing and supporting high-performance, cost effective Uninterruptible Power Systems (UPS) and frequency/voltage conversion solutions to protect mission-critical applications since 1988. IntelliPower’s on-line, double conversion UPS, power conditioner and frequency/voltage converter solutions utilize digitally controlled, high-efficiency power switching technology that has been proven for over 32 years on numerous platforms.
Customers with demanding environments use IntelliPower’s rugged products because of our proven record of providing outstanding solutions. IntelliPower’s in-house development proprietary circuit design, DSP firmware/software technology and wide range of enclosure designs, give IntelliPower unmatched capabilities to deliver systems configured to customer requirements backed by expert support.
Our ability to design and configure quickly is based on our standard proprietary subassemblies that go into variations of our power systems as required. Our product configurator tools and application engineers allow you to easily define your requirements and obtain your proposal for solutions that exactly meet your needs.
Contact Details
IntelliPower, Incorporated
1746 North Saint Thomas Circle, Orange, California 92865, USA
Phone: 714-921-1580
Fax: 714-921-4023
Email: ca-ora-sales@ametek.com
Contact form