FRIWO - LEV500 Li-Ion Charger
-
LED display for device status
-
Passive cooling
-
Removable carrying handle
-
Short circuit proof
-
Protection against overheating, overvoltage and polarity reversal
-
Parameterizable for other cell sizes
Our Li-Ion charger LEV500 impresses with the latest technology built into a unique and compact design. For this, the charger has received the prestigious Red Dot Award 2022 in the category "Product Design".
With the IP65 protection class, the device is dust-tight and protected against water jets from any angle. This means that the LEV500 can be used with maximum safety even under difficult conditions. The charger is designed for 14S battery packs as standard, but can also be parameterized for other cell sizes.
Connectivity:
The LEV500 comes standard with a Weipu charging connector. In addition to charging, this connector also enables CAN communication with our battery management system. Other connectors are available upon request, in which case CAN communication is not guaranteed.
Mounting:
Due to the screw fixtures and the fanless design of the LEV500, a fixed mounting in horizontal or vertical direction is possible in addition to the mobile ground position.
Additional information
- Cell Chemestry: Li-Ion
- Power: 500 W
- Protection Class: I
- leakage current: ≤ 750 µA
- Input voltage: 220-240 V
- Frequency: 50-60 Hz
- Input current: 2000-2800 mA
- Humidity: 10-95 %
- Dimension: 267,2x114,8x73,0 mm
- AC Input: 3 pole, 1 m length
- DC output: diverse
- Standard: IEC60335-1, EN60335-2-29
- IP Rotection rating: 65 (except connectors)
- Approbations: EU
- Current: 0-8500 mA
- Operating temperature: -20°C...+50°C
- Weight: 2215 g
Document
Document
Document
More Product Information
- Part of the MicroBrite™ family of high performance, compact machine vision lights.
- Our DF196 Series delivers direct illumination at a low angle to cast shadows used to identify surface defects, embossed text, etc.
- This dark field ring light is more directional and less diffuse than the DF198.
- Available in 4 sizes with an intesity of 72kLux (working distance of 25mm with DF196-100)
- Autonomous Modal Parameter Estimation Procedure
- Multiple Live Parameter Estimation Windows
- Task Oriented, Easy-To-Use Interface
- Logical Operation Always "One-Click" away
- Simplified "Copy & Paste" Data Management
- Simplified Units Unification Tool
- Based on MATLAB® Computational Engine Environment
- Universal File Format (UFF) Data Access
- Individual Data Channel Calibration
FormFactor's FRT Metrology engineers designed SurfaceSens technology to achieve superior information about the measured sample and greater insights about product quality. All of our FRT MicroProf® metrology tools can be configured with complementary sensor technologies. In a hybrid analysis process, otherwise inaccessible surface data of wafers or other samples are precisely measured.
- 8 Independent Channels, 2 Output Connectors
- Includes built-in pre-programmed sequencing.
- Provides control for computational imaging, including photometric stereo, extended depth of field, combined bright field + dark field, high dynamic range, and high resolution color.
- Ideal for multi-channel lights and multi-light stations. Due to power output constraints, some configurable light lengths may be limited.
- Housed within a compact enclosure with DIN rail mounting.
- Driven with SignaTech™ for improved safety and easy operation.
NOTE: NOT COMPATIBLE WITH C1 CONNECTORS
-
High efficiency: up to 85.5%
-
Low no load power consumption <90mW
-
Meets DoE efficiency level VI
-
CoC version 5 ready
-
Ultra-low leakage current ≤10μA
-
IEC 60601-1-2, 4th edition ready
-
Wide operating temperature range 0 - 45°C
-
Isolation 2x MOPP
-
Double housing safety: snapped & welded
-
IP42 approved interchangeable plug system as additional accessories
-
IEC 60601-1-11 ready with IPX2 adapter
-
New release 5000m operating altiutude
-
Power quality and energy functions
-
0.01° phase shift accuracy
-
15 - 1000 Hz output
-
Built-in multimeter for transducer calibration
-
Floating current outputs for 3-wire power meters
-
Voltage from Current function
The Drive Unit consists of a permanent magnet synchronous machine (PMSM) and our 48V MC6000 Motor Controller. The machine features a high torque/power density and can be operated in all four quadrants using the sophisticated control software. A permanent mechanical output power of 5 kW makes this drive system ideal for 48V applications in the e-mobility sector.
The system is controlled either via gas pedal and brake or via CAN bus.
-
Sony ICX618 sensor
-
121 fps at full resolution
-
Rugged housing
-
Video-type auto iris
-
Monochrome (GC660) and color (GC660C) models
-
GigE Vision interface
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-5e or CAT-6)
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
High efficiency: up to 86.9 %
-
Low no load power consumption < 90 mW
-
Meets DoE efficiency level VI
-
CoC version 5 ready
-
Ultra-low leakage current ≤ 10 μA
-
IEC 60950-1
-
Wide operating temperature range 0 - 50°C
-
Double housing safety: snapped & welded
-
IP42 approved interchangeable plug system as additional accessories
-
Also available as version with fixed plugs: FOX18-F
FRIWO
Based on 50 years of experience, FRIWO today has a global presence with modern development centres, production facilities and sales in Europe, Asia and North America. The FRIWO brand stands for innovative strength, security, safety, quality, and efficiency around the world. As proof of this, we are certified according to DIN ISO 9001 (Quality Management), DIN ISO 14001 (Environmental Management), and DIN ISO 13485 (Quality management for medical devices). At the end of the 2020 fiscal year, the company employed over 2,500 people worldwide and generated revenue of 99.4 million euros.
As an international system provider, FRIWO, headquartered in Ostbevern (DE), develops and produces digitally controllable power supply and drive solutions for futureoriented industries such as power tool technology, industrial applications, medical technology or electromobility.
The product portfolio includes technologically leading chargers, battery packs and power supply units as well as intelligent components for electric drive trains. The range of solutions extends from the display, motor control and drive unit to the control software.
Contact Details
FRIWO Gerätebau GmbH Headquarters
Von-Liebig-Straße 11, 48346 Ostbevern, Germany
Phone: +49-25-32-81-0
Fax: +49-25-32-81-112
Email: hello@friwo.com
Embedded
Download Line Card
Document
