FRIWO - Drive Unit 5kW - Engine (5kW, 26Nm) + MC6000 (6kW)
The Drive Unit consists of a permanent magnet synchronous machine (PMSM) and our 48V MC6000 Motor Controller. The machine features a high torque/power density and can be operated in all four quadrants using the sophisticated control software. A permanent mechanical output power of 5 kW makes this drive system ideal for 48V applications in the e-mobility sector.
The system is controlled either via gas pedal and brake or via CAN bus.
The most important data of the drive unit at a glance:
General features:
- Machine type: permanent magnet synchronous machine (PMSM) with surface-mounted rotor magnets in axial flux direction.
- Recuperation: Yes
- Reverse: Yes
- Position sensor: Hall sensor
- Control type: field-oriented control including field weakening
Electrical parameters
- DC rated voltage: 48 V
- DC rated current: 125 A
- Absorbed nominal power (peak power): 6.2 kW (10.8kW)
Mechanical parameters:
- Rated torque: 10 Nm
- Peak torque: 38 Nm
- Rated speed: 3000 rpm
- Max. Speed: 5000 rpm
- Rated power output: 5 kW
- Max. System efficiency: 83% @ 3500 rpm, 4.75 kW, 13 Nm
Connectivity:
- CAN bus: Yes
- Diagnostic interface: USB, CAN
Additional information
- Length: motor: 146,5 mm, control: 52 mm, total: 198,5 mm
- Weight (in kg): 10.9
- Diameter: 201mm
- Shaft diameter: 22,23 mm
Document
More Product Information
-
AR0135CS CMOS sensor
-
ALVIUM image processing
-
MIPI CSI-2 interface
-
Various hardware options
-
Monochrome (1500 C-120m) and color (1500 C-120c) models
-
ALVIUM® Technology for on-board image processing
-
MIPI CSI-2 interface with up to 4 lanes
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Hirose HR FHH55 FPC connector with minimum space requirements for a compact design
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for embedded vision applications
-
Easy-to-install driver and code examples
-
IEC 60601-1 approved
-
≤ 10μA leakage current
-
Protection class 2xMOPP
-
DOE 2016 ready
-
IP42 approved exchangeable plug system as additional accessories
-
Double Safety: Housing snapped & welded
-
High efficiency: up to 81.6%,
-
low no load power consumption <95mW,
-
meets DoE efficiency level VI,
-
CoC version 5 Tier 2,
-
ultra-low leakage current ≤10μA,
-
IEC 60601-1-2, 4th edition ready,
-
wide operating temperature range 0 - 45°C,
-
isolation 2x MOPP,
-
double housing safety: snapped & welded,
-
IP42 approved interchangeable plug system as additional accessories,
-
IEC 60601-1-11 ready with IPX2 adapter
-
IMX226 CMOS sensor
-
ALVIUM image processing
-
MIPI CSI-2 interface
-
Various hardware options
-
Monochrome (1800 C-1240m) and color (1800 C-1240c) models
-
ALVIUM® Technology for on-board image processing
-
MIPI CSI-2 interface with up to 4 lanes
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Hirose HR FHH55 FPC connector with minimum space requirements for a compact design
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for embedded vision applications
-
Easy-to-install driver and code examples
-
High efficiency: up to 81.6%
-
Low no load power consumption <95mW
-
Meets DoE efficiency level VI
-
CoC version 5 ready
-
Ultra-low leakage current ≤10μA
-
IEC 60601-1-2, 4th edition ready
-
Wide operating temperature range 0 - 45°C
-
Isolation 2x MOPP
-
Double housing safety: snapped & welded
-
IP42 approved interchangeable plug system as additional accessories
-
Also available as version with fixed plugs: FOX6-FM
We have complete standard and custom test systems that perform entire radiated immunity tests with just the press of a few buttons. Everything you need – amplifiers, antennas, couplers, signal generators, system controllers, receivers, and more, along with the software to control it – all in one comprehensive system.
The Drive Unit consists of a permanent magnet synchronous machine (PMSM) and our 48V MC6000 Motor Controller. The machine features a high torque/power density and can be operated in all four quadrants using the sophisticated control software. A permanent mechanical output power of 5 kW makes this drive system ideal for 48V applications in the e-mobility sector.
The system is controlled either via gas pedal and brake or via CAN bus.
- Dual Voltage ranges that support over voltage testing on 480V based systems
- Instrument Setups for quickly re-establishing the known instrument state
- 500uS time resolution for Transients
- Virtual Panels control software included
- Non-Linear current waveform programming during Load mode
- Phase coordination among multiple units (LKM/LKS)
- Powerful set of analog controls for PHIL and Modulation tests
- Trigger In & Out to permit extensive coordination with external systems
- Extensive Onboard diagnostics
- Digital I/O, including RS232, USB, Ethernet (GPIB optional)
- Intuitive 5” color display for ease of navigation
- Auto-paralleling for maximum flexibility with multi-chassis configurations
- Separate terminal blocks for single-phase and three-phase AC outputs
FRIWO
Based on 50 years of experience, FRIWO today has a global presence with modern development centres, production facilities and sales in Europe, Asia and North America. The FRIWO brand stands for innovative strength, security, safety, quality, and efficiency around the world. As proof of this, we are certified according to DIN ISO 9001 (Quality Management), DIN ISO 14001 (Environmental Management), and DIN ISO 13485 (Quality management for medical devices). At the end of the 2020 fiscal year, the company employed over 2,500 people worldwide and generated revenue of 99.4 million euros.
As an international system provider, FRIWO, headquartered in Ostbevern (DE), develops and produces digitally controllable power supply and drive solutions for futureoriented industries such as power tool technology, industrial applications, medical technology or electromobility.
The product portfolio includes technologically leading chargers, battery packs and power supply units as well as intelligent components for electric drive trains. The range of solutions extends from the display, motor control and drive unit to the control software.
Contact Details
FRIWO Gerätebau GmbH Headquarters
Von-Liebig-Straße 11, 48346 Ostbevern, Germany
Phone: +49-25-32-81-0
Fax: +49-25-32-81-112
Email: hello@friwo.com
Embedded
Download Line Card
Document
