FRIWO - FOX90- C Charger Li-Ion Medical Charging Technology SM-Charger FW8100M/07/4.2/3.0 15.4460.555-00 FRIWO Gerätebau GmbH
See Specifications & Details tab for additional information
Required Accessories
To operate this device you need a primary cord. This can be found here: Power Cords
Product information "FOX90- C Charger Li-Ion"
Chargers for Lithium- Ion systems. All products conform to IEC 60335.
Additional information
- Input voltage: 100-240 V
- Frequency: 50-60 Hz
- leakage current: ≤100 µA
- Reverse current: 50 µA
- Output voltage tolerance: ±1
- Start-up-time: ≤5 sec.
- Standby losses: ≤0,5 87,5%
- Efficiency (typ. full load): ≥80%
- MTBF: 200000
- Working temperature: 0-40°C
- Humidity: 10-85%
- Storage temperature: -20-70°C
- Operating Altitude: 2000 m
- Input current: 1850-870 mA
- Standard: EN61558-1, EN61558-2-6, EN60335-1, EN60335-2-29
- Protection Class: II
- Dimension: 179x86x50,5 mm
- Weight: 507 g
- AC Input: 2 pole, IEC60320-C8
- DC output: 3 pole, JST plug
- color: black
- Spec.0 cover sheet FW-Type: FW8100M/07/4.2/3.0
- Chemistry: Li-Ion
- No. Of Cells: 7
- Charging voltage: 29,4 V
- Current: 3000 mA
Document
Document
More Product Information
See Specifications & Details tab for additional information
-
High efficiency: up to 88 %
-
Low no load power consumption < 100 mW
-
Meets DoE efficiency level VI
-
CoC version 5 ready
-
Ultra-low leakage current ≤ 10 μA
-
IEC 60950-1
-
Wide operating temperature range 0 - 45°C
-
Double housing safety: snapped & welded
-
IP42 approved interchangeable plug system as additional accessories
-
Also available as version with fixed plugs: FOX30-F
Battery cable to power the Back-to-Back Test Bench for autonomous operation via our FRIWO Battery Pack.
The company's IP42 splash-proof adapters featuring IP42-certified splash protection, which are available from FRIWO for the FOX system, are a particular highlight.
Protective covers for the LT range from FRIWO off er an easy way to permanently install LED drivers and light control units, while also protecting their electrical contacts.
-
Cap for: LT10, LT20, LT40, LT60, LT100, DIMMbox
The devices are protection class II compliant, voltage controlled, current-limited and continuously short-circuitproof, which means they offer a high level of operational safety combined with a long operational life. They also comply with the latest guidelines. Thanks to idle consumption of ≤ 300 mW and high efficiency at every power level, the units comply with the current threshold values of various energy efficiency programs, such as Energy Star, MEPS or ErP.
Fits into all standard in-wall junction boxes, easy and invisible mounting, safe against vandalism, many applications: Sanitary installations, security equipment, lighting, etc. Compact design Cost reductions by long lifetime and high efficiency
Fits into all standard in-wall junction boxes, easy and invisible mounting, safe against vandalism, many applications: Sanitary installations, security equipment, lighting, etc. Compact design Cost reductions by long lifetime and high efficiency
The “U” Series customizable, Class A design is ideal for laboratory and EMC testing, as well as testing antennas, components, piezoelectric devices, wireless chargers, and more. The “U” Series offers performance and durability with the power and frequency for universal applications. In addition to the models listed below, custom versions are also available.
-
Write your own code in ANSI C, as part of the FRIWO firmware.
-
Focus on developing your own applications and USPs:
-
Develop your own hill assist (application: eScooter)
-
Turn your motor control into a fan or pump control
-
Adapt CAN messages to your existing eScooter setup
-
Adapt CAN messages of your FRIWO Battery Pack
-
Use your own algorithms for field oriented control (coming soon)
-
Develop your own State of Charge (SOC) calculation within the BMS (coming soon)
-
-
Access to new modules to provide even more integration depth and possibilities for customization.
-
Monitor and change your own parameters within the FRIWO Enable Tool.
-
Advanced component protection against misconfiguration.
-
Easy rollout of your customized software for your eScooter fleet (Requirement: The eScooters run with MCU6000).
-
Access to Github Repository with detailed code samples.
-
High efficiency: up to 81.6%
-
Low no load power consumption <95mW
-
Meets DoE efficiency level VI
-
CoC version 5 ready
-
Ultra-low leakage current ≤10μA
-
IEC 60601-1-2, 4th edition ready
-
Wide operating temperature range 0 - 45°C
-
Isolation 2x MOPP
-
Double housing safety: snapped & welded
-
IP42 approved interchangeable plug system as additional accessories
-
Also available as version with fixed plugs: FOX6-FM
FRIWO
Based on 50 years of experience, FRIWO today has a global presence with modern development centres, production facilities and sales in Europe, Asia and North America. The FRIWO brand stands for innovative strength, security, safety, quality, and efficiency around the world. As proof of this, we are certified according to DIN ISO 9001 (Quality Management), DIN ISO 14001 (Environmental Management), and DIN ISO 13485 (Quality management for medical devices). At the end of the 2020 fiscal year, the company employed over 2,500 people worldwide and generated revenue of 99.4 million euros.
As an international system provider, FRIWO, headquartered in Ostbevern (DE), develops and produces digitally controllable power supply and drive solutions for futureoriented industries such as power tool technology, industrial applications, medical technology or electromobility.
The product portfolio includes technologically leading chargers, battery packs and power supply units as well as intelligent components for electric drive trains. The range of solutions extends from the display, motor control and drive unit to the control software.
Contact Details
FRIWO Gerätebau GmbH Headquarters
Von-Liebig-Straße 11, 48346 Ostbevern, Germany
Phone: +49-25-32-81-0
Fax: +49-25-32-81-112
Email: hello@friwo.com
Embedded
Download Line Card
Document
