FRIWO - FOX12-X-USB Industrial/ITE power supply 5V / 2200mA, worldwide
-
DOE 2016 Ready
-
High efficiency
-
Low standby power ≤ 0.1 Watts
-
Exchangeable primary lead for worldwide use
-
Double Safety: snapped & welded
Required Accessories
For the operation of this device you need a primary adapter. This can be found here: Primary adapters
Product information "FOX12-X-USB"
Efficiency Level VI, Overload Protection, Over Voltage Protection, Shotz circuit protection
Additional information
- Protection Class: II
- Output voltage tolerance: ± 5%
-
MTBF: 200.000h acc. Mil217F (based on calculations at
120Vac/60Hz & 230Vac/50Hz, ambient 25°C
and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h - Spec.0 cover sheet FW-Type: FW8000USB/05
-
Storage temperature
: -40°C - 70°C V - Working temperature: 0°C - 40°C
- color: black
- Humidity: 10% bis 95% V
- AC Input: FRIWO interchangeable mains plug system: see Primary Adapters
- Input voltage: 100-240 V
- Input tolerance: ±10%
- Frequency: 50 / 60 Hz
- DC output: USB socket Typ A
- Unit: PP
- Current: 2200 mA
- Output voltage: 5 V
- Standard: IEC60950
- Family : FOX12
Document
More Product Information
See Specifications & Details tab for additional information
See Specifications & Details tab for additional information
-
LED display for device status
-
Passive cooling
-
Removable carrying handle
-
Short circuit proof
-
Protection against overheating, overvoltage and polarity reversal
-
Parameterizable for other cell sizes
Vimba is our future-proof platform-independent SDK for all Allied Vision cameras with GigE Vision, USB3 Vision, IEEE 1394, and Camera Link interface. With Vimba, you can acquire images and control your Allied Vision camera instantly, but also program complex vision applications or connect to third-party libraries.
Highlights
-
Individual test modes: Mode S, ATCRBS Transponder, DME, TCAS, TIS, ADS-B MON/ ADS-B GEN (DO-260A/B), 978MHz UAT
-
Large keys for gloved operation
-
Simple user interface
-
Lightweight and compact at 8 lbs.
-
Battery operation 6 hours plus between charges
-
Fully FAR part 43 appendix F compliant
-
Transponder Auto-Test
-
Data dump of transponder test results to PC
-
Elementary and Enhanced Surveillance parameters (DAP’s)
-
Transponder level automatically determined and capability checked to avoid nuisance Auto-Test failures
-
Comprehensive GICB test
-
Configuration files for different classes of transponder
-
Comprehensively tests any DME channel including track sensitivity
-
User selectable TCAS scenarios
-
TCAS fast scenario feature uses Auto Altitude and Converge to ensure automatic collision at zero range
-
Over-the-air or direct-connect operation
-
Parametric measurements including TX power and frequency
-
USB flash drive software update via web site download
-
Optional ADS-B capabilities are DO-260A/B compliant
-
Optional TCAS and 978 MHz UAT capability
-
Optional testing using UC-584 Coupler
-
Dual Voltage ranges that support over voltage testing on 480V based systems
-
Separate terminal blocks for single phase and 3 phase outputs
-
High Power AC and DC Power Source
-
Auto paralleling for higher power system expansion
-
Single and three phase modes
-
Arbitrary & Harmonic Waveform Generation
-
Standard LXI LAN, USB, and RS-232, Optional GPIB
-
500uS time resolution for Transients
-
Complete avionics test suites
-
15kVA to 1MVA Power Levels
-
Intuitive 5” color display for ease of navigation
-
Internationally accepted test routines for EMI/EMC, Safety compliance
-
Industry Leading Power Density
-
Up to 1500 Watts in 1U
-
-
Standard Digital Interfaces – USB&RS232/485
-
LXI Ethernet and Isolated analog interfaces
-
Power Factor Correction-PFC and universal AC input
-
“Green” Sleep Mode – Automatically “sleeps” after period of non-use
-
Built in sequencing - Unload your system controller
-
Programmable fold-back protection delay
-
IMX183 CMOS sensor
-
ALVIUM image processing
-
USB3 Vision
-
Various hardware options
-
Monochrome (1800 U-2050m) and color (1800 U-2050c) models
-
ALVIUM® Technology for on-board image processing
-
USB3 Vision interface for GenICam SFNC features
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Micro-B USB 3.1 Gen 1 connector with screw locks for industrial applications
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for both embedded and machine vision applications
See Specifications & Details tab for additional information
FRIWO
Based on 50 years of experience, FRIWO today has a global presence with modern development centres, production facilities and sales in Europe, Asia and North America. The FRIWO brand stands for innovative strength, security, safety, quality, and efficiency around the world. As proof of this, we are certified according to DIN ISO 9001 (Quality Management), DIN ISO 14001 (Environmental Management), and DIN ISO 13485 (Quality management for medical devices). At the end of the 2020 fiscal year, the company employed over 2,500 people worldwide and generated revenue of 99.4 million euros.
As an international system provider, FRIWO, headquartered in Ostbevern (DE), develops and produces digitally controllable power supply and drive solutions for futureoriented industries such as power tool technology, industrial applications, medical technology or electromobility.
The product portfolio includes technologically leading chargers, battery packs and power supply units as well as intelligent components for electric drive trains. The range of solutions extends from the display, motor control and drive unit to the control software.
Contact Details
FRIWO Gerätebau GmbH Headquarters
Von-Liebig-Straße 11, 48346 Ostbevern, Germany
Phone: +49-25-32-81-0
Fax: +49-25-32-81-112
Email: hello@friwo.com
Embedded
Download Line Card
Document
