FRIWO - Back-to-Back Test Bench Basic Setup
-
Massively reduce time to market of new powertrain soft- and hardware components through Rapid Control Prototyping.
-
Create education labs demonstrating next- generation developers the newest technology in a tangible way.
-
Compact setup with flexible configuration possibilities to adapt own components quickly.
-
Extend the setup by battery packs to build up a complete powertrain system and monitor energy flow.
-
Optionally add a torque sensor to get mechanical output power in high precision
Product information "Back-to-Back Test Bench"
With the help of our new Back-to-Back test bench, you can massively shorten your time-to-market for new powertrain software and hardware components through Rapid Control Prototyping. Thanks to the compact setup with flexible configuration possibilities, you can quickly implement adaptations of your own components.
Perform fine-tuning and calibration in real time:
- Real-time monitoring and calibration of firmware parameters through Enable Tool Application
- Simulate realistic driving maneuvers through 4-Quadrant torque/speed profiles
- Precise measurement of the Torque Curve via CAN
- Get full development freedom by combining with our software development kit (SDK) for functional development and application-level integration
For power supply use a stationary bidirectional DC power supply or for autonomous operation use our FRIWO Battery Pack to be even more flexible.
Choose between setups:
When deciding upon the Basic Setup, the testbench comes without torque sensor, Analog-To-CAN-Converter and mechanical sensor mounting. Both drivetrains are connected directly via a claw clutch. Choosing the Full Setup all the mentioned components will be delivered directly with the testbench. Optionally, the Basic Setup can be extended subsequently using the Full Setup Extension Package.
Additional information
- Voltage min. (DC): 20 V
- Voltage max. (DC): 65 V
- Current max. (AC): 300 A
- CAN-Baudrate: 125, 250, 500, 1.000 kBaud/s
- USB-Bitrate (Virtual-Com-Port): 256 kBit/s
- Analog Interface: 2x 0...5V (per MCU)
- Motor Type: Permanent magnet synchronous motor with surface-mounted magnets (SM-PMSM)
- Current max. (DC): 210 A
- Electrical Output Frequency max. (MC6000): 1600 Hz
- Rotor Speed max. (Motor): 6000 1/min (mech.)
- Repetitive Peak Power @48V: 10800 W
- Nominal Power @48V: 6240 W
Document
Document
More Product Information
- High Power Density: Up to 15 kW in 3U, 30 kW in a 6U chassis
- Wide Voltage Range: 0-10V up to 0-1000V, from 4 to 30 kW
- Fast Load Transient Response: Protection from undesired voltage excursions
- Low Ripple and Noise
- Intuitive Touch Screen Display
- Parallelable up to 150 kW
- Sequencing: Free system controller & speed up test
- Low audible noise: Temperature controlled variable speed fans
-
Easy-to-use UI (“2-clicks” to get a stream running)
-
Wide range of optical & copper test modules for testing all speeds up to 800GE
-
Thor-400G-7S-1P & Thor-100G5S-1P are the only test modules on the market that can test AN/ LT as well as PAM4-based speeds (50, 100, 200 and 400GE) and NRZ based speeds (10, 25, 40, 50 and 100GE)
-
Advanced FEC stats for PAM4
-
Same CLI commands across all port speeds
-
Industry’s best traffic scheduler
-
Industry’s only UI integrated Traffic Generation & Impairment solution (Valkyrie & Chimera)
-
Robust chassis platform (Linux), runs “forever”, supporting +40-day test cases
-
Smooth and fast chassis software upgrade processes
-
Multi-user platform with port reservation resolution down to one port per user
-
Very precise and accurate traffic generation
-
Free software (ValkyrieManager, ValkyrieCLI, Valkyrie2544, Valkyrie2889, Valkyrie1564, Valkyrie3918)
-
Synchronize chassis with ValkyrieTimeSynch option
-
Free training & tech support for product lifetime
Simulator to reproduce various transient surge phenomena which are generated in a vehicle and required in the international standard ISO-7637-2 (2004) Standard, and evaluate the immune resistibility of the equipped electronics devices against the surge.
- ISO 7637-2 (2004) Standard compliant simulator
- Correspondent to the test for 12V/24V/42V systems in a vehicle
- Stand-alone usage per the each generator unit possible as well as the comprehensive control
- Large capacity CDN (60V/50A) available (Option)
- Up to 200A power supply possible (Option)
- Windows in Japanese applicable for the software program as well
Private standards or specifications by manufactures can be responded upon request.
- Energy absorber with a rating of 400VDC at ±150A
- Provides up to 400V at 150A for 60kW of output power
- Energy Absorber Load chassis creates a total resistance of approximately 1.5 Ohms at 30kW continuous and 60kW peak
- Our Standard Intensity Linear Backlights provide rugged construction for demanding environments.
- Standard intensity illumination with low power input requirements.
- Multiple wavelengths available with very consistent illumination over the entire active area.
- Available in 1” (25mm) increments with lengths up to 80.5” (2044mm).
See Specifications & Details tab for additional information
Image optimization features:
-
Auto gain (manual gain control: 0 to 32 dB)
-
Auto exposure (manual exposure control: 10 µs to 26.8 s)
-
Auto white balance (GT2300C only)
-
Binning (horizontal and vertical)
-
Color correction, hue, saturation (GT2300C only)
-
Column defect masking
-
Decimation X/Y
-
Gamma correction
-
Three look-up tables (LUTs)
-
Region of interest (ROI), separate ROI for auto features
-
Reverse X/Y
Camera control features:
-
P-Iris and DC-Iris lens control
-
Event channel
-
Image chunk data
-
IEEE 1588 Precision Time Protocol (PTP)
-
RS232
-
Storable user sets
-
StreamBytesPerSecond (bandwidth control)
-
Stream hold
-
Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
-
Tap mode switchable in Vimba Viewer 2.0 or later (four-tap, one-tap)
-
Temperature monitoring (main board and sensor board)
-
Trigger over Ethernet (ToE) Action Commands
Our EuroBrite™ lineup outdoes the competition in so many ways. With more features at a competitive price point, there’s no better value in machine vision lighting:
- Complete built-in control for continuous and strobe modes.
- Adaptive Power™, a feature of the EuroBrite™ lighting controller, utilizes an onboard thermistor to maximize light output in continuous mode.
- Adaptive Overdrive,™ another feature of the EuroBrite™ lighting controller, provides a maximal output pulse in strobe mode regardless of the exposure period.
- IP67 sealed enclosure suitable for washdown environments.
- Rugged construction that has been tested to withstand over 1000lb.
- Industrial grade LEDs providing high-intensity surface illumination of 38klux.
- Provides a passive PCIe® backplane for test applications
- Self-contained, portable and self-powered
- Supplies power for +3.3V, +3.3Vaux and +12V rails
- Generates PCIe reference clock
- Accepts external clock inputs
- Generates valid PERST# bus reset that can be activated by manual push button
- Includes two mid-bus probe footprints for traffic monitoring
- Supports two PCIe x16 sockets which accept cards of any link width (x1, x4, x8, x16)
- Provides indication of valid connection of PRSNT1# and PRSNT2# lines for each card
- Supports data rates of 2.5 GT/s and 5.0 GT/s
FRIWO
Based on 50 years of experience, FRIWO today has a global presence with modern development centres, production facilities and sales in Europe, Asia and North America. The FRIWO brand stands for innovative strength, security, safety, quality, and efficiency around the world. As proof of this, we are certified according to DIN ISO 9001 (Quality Management), DIN ISO 14001 (Environmental Management), and DIN ISO 13485 (Quality management for medical devices). At the end of the 2020 fiscal year, the company employed over 2,500 people worldwide and generated revenue of 99.4 million euros.
As an international system provider, FRIWO, headquartered in Ostbevern (DE), develops and produces digitally controllable power supply and drive solutions for futureoriented industries such as power tool technology, industrial applications, medical technology or electromobility.
The product portfolio includes technologically leading chargers, battery packs and power supply units as well as intelligent components for electric drive trains. The range of solutions extends from the display, motor control and drive unit to the control software.
Contact Details
FRIWO Gerätebau GmbH Headquarters
Von-Liebig-Straße 11, 48346 Ostbevern, Germany
Phone: +49-25-32-81-0
Fax: +49-25-32-81-112
Email: hello@friwo.com
Embedded
Download Line Card
Document
