AVT - Prosilica GC 1380H GigE Vision, Sony ICX285 EXview CCD sensor, auto-iris, 30 fps
-
Sony ICX285 CCD sensor
-
30 fps at full resolution
-
Rugged housing
-
Video-type auto iris
-
Monochrome (GC1380H) and color (GC1380CH) models
-
GigE Vision interface
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-5e or CAT-6)
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
Prosilica GC1380H is a 1.4 Megapixel camera with a GigE Vision compliant Gigabit Ethernet interface and Hirose port. Prosilica GC1380H is offered in both monochrome and color models. This camera incorporates the high quality Type 2/3 (11.0 mm diagonal) Sony ICX285 CCD sensor with EXview HAD CCD technology that provides superior image quality, excellent sensitivity, and low noise. At full resolution, this camera has a frame rate of 30 frames per second. With a smaller region of interest higher frame rates are possible. By default monochrome models ship with no optical filter and color models ship with a Type IRC30 IR cut filter.
Hardware options
- Various lens mounts: Select between C-Mount and CS-Mount
- Various optical filters: Select between B 270 ASG protection glass Type IRC30 IR pass filter.
See the Modular Concept for lens mount and optical filter options.
Specifications
Interface
IEEE 802.3 1000baseT
Resolution
1360 (H) × 1024 (V)
Sensor
Sony ICX285
Sensor type
CCD Progressive
Sensor size
Type 2/3
Pixel size
6.45 µm × 6.45 µm
Shutter mode
Global shutter
Lens mount (default)
C-Mount
Max. frame rate at full resolution
30 fps
ADC
12 Bit
Image buffer (RAM)
64 MByte
Imaging performance
Imaging performance data is based on the evaluation methods in the EMVA 1288 Release 3.1 standard for characterization of image sensors and cameras. Measurements are typical values for monochrome models measured at full resolution without optical filter.
Quantum efficiency at 529 nm
54 %
Temporal dark noise
17.5 eˉ
Saturation capacity
14000 eˉ
Dynamic range
57.9 dB
Absolute sensitivity threshold
18.0 eˉ
Output
Bit depth
8/12 Bit
Monochrome pixel formats
Mono8, Mono12, Mono12Packed
RGB color pixel formats
RGB8Packed, BGR8Packed
Raw pixel formats
BayerRG8, BayerRG12, BayerRG12Packed
Operating conditions/dimensions
Operating temperature
0 °C to +50 °C ambient (without condensation)
Power requirements (DC)
5 to 25 VDC
Power consumption
3.5 W at 12 VDC
Mass
111 g
Body dimensions (L × W × H in mm)
59 × 46 × 33 (including connectors)
Regulations
CE: 2014/30/EU (EMC), 2011/65/EU, including amendment 2015/863/EU (RoHS); FCC Class A; CAN ICES-003
Features
Image optimization features:
- Auto gain (manual gain control: 0 to 33 dB, 1 dB increments)
- Auto exposure (manual exposure control: 10 µs to 72.9 s; 1 µs increments)
- Auto white balance (GC1380CH only)
- Binning (horizontal and vertical) (sum)
- Black level (Offset)
- Gamma correction
- Hue, saturation, color transformation (GC1380CH only)
- Three look-up tables
- Region of interest, DSP subregion (selectable region for auto features)
Camera control features:
- Auto-iris (video type)
- Event channel
- Global shutter (digital shutter)
- IEEE 1588 Precision Time Protocol
- Image chunk data
- Recorder and Multiframe acquisition modes
- RS232
- Three storable user sets
- StreamBytesPerSecond (bandwidth control)
- StreamHoldCapacity (Up to 46 frames at full resolution)
- Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
- Temperature monitoring (mainboard only)
Applications
Prosilica GC1380H is ideal for a wide range of applications including:
- Industrial inspection
- Machine vision
- Ophthalmology
- Microscopy
- Fluorescence
- Aeronautical and aerospace
- Public security
- Surveillance
- Traffic imaging
Quantum efficiency
Document
Document
Document
Document
Document
Document
Technical papers, knowledge base
3D CAD files (STEP)
Please right-click the link of a 3D camera model and select save as to download the file. After downloading, unzip the STEP file. You need a 3D CAD viewer application to view and measure the STEP files. Download a STEP viewer free of charge: https://www.freecadweb.org/
- GC650, C-Mount
- GC650C, C-Mount
- GC655, C-Mount
- GC655C, C-Mount
- GC660, C-Mount
- GC660C, C-Mount
- GC750, C-Mount
- GC750C, C-Mount
- GC780, C-Mount
- GC780C, C-Mount
- GC1020, C-Mount
- GC1020C, C-Mount
- GC1280, C-Mount
- GC1290, C-Mount
- GC1290C, C-Mount
- GC1350, C-Mount
- GC1350C, C-Mount
- GC1350CH, C-Mount
- GC1350H, C-Mount
- GC1380, C-Mount
- GC1380C, C-Mount
- GC1380CH, C-Mount
- GC1380H, C-Mount
- GC1600, C-Mount
- GC1600C, C-Mount
- GC1600CH, C-Mount
- GC1600H, C-Mount
- GC2450, C-Mount
- GC2450C, C-Mount
Software and firmware
Vimba is our current future-proof SDK.
Other SDKs and tools are available on our Software downloads webpage.
GigE camera firmware is available on our Firmware webpage.
More Product Information
-
15.0 fps at full resolution
-
Power over Ethernet option
-
Angled-head and board level variants
-
Video-iris lens control
-
Monochrome (G-145B) and color (G-145C) models
-
GigE Vision interface with Power over Ethernet option
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
Image optimization features:
-
Auto gain (manual gain control: 0 to 22 dB)
-
Auto exposure (manual exposure control: 100 µs to 1 s, 1 µs increments)
-
Binning (horizontal and vertical) (sum)
-
Decimation X/Y
-
Enhanced Defect Pixel Correction (DPC)
-
Fixed Pattern Noise Correction (FPNC)
-
Gamma correction
-
Three look-up tables (LUTs)
-
Region of interest (ROI)
Camera control features:
-
EF lens control (order option -18)
-
Event channel
-
Image chunk data
-
IEEE 1588 Precision Time Protocol (PTP)
-
RS232
-
Storable user sets
-
StreamBytesPerSecond (bandwidth control)
-
Stream hold
-
Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
-
Temperature monitoring (main board and sensor board)
-
Trigger over Ethernet (ToE) Action Commands
Alvium G1 provides the highest image quality in a future-proof package.
Benefit from a rich feature set and a highly flexible platform!
- Reliability: Established GigE Vision standard
- Future-proof design: Based on latest technology standards ensuring long-term availability
- Extraordinarily small size: 41 mm × 29 mm × 29 mm (Closed Housing)
- Various sensors: Select between CMOS sensors from ON Semi and Sony
- Industrial-grade hardware: With its compact housing and industrial standard hardware, it can easily be integrated into any vision system.
- Easy upgrade: If your application ever needs a performance boost, you can simply upgrade it with an Alvium G5 camera.
-
High SNR mode (up to 24 dB better signal-to-noise ratio)
-
Low-noise binning mode
-
Shading correction
-
Defect pixel correction
-
Area of interest (AOI), separate AOI for auto features
-
Binning
-
Decimation
-
Auto gain (manual gain control: 0 to 24.4 dB)
-
Auto exposure (74 µs to 67 s)
-
Auto white balance
-
Look-up table (LUT)
-
Hue, saturation
-
Color correction
-
Local color anti-aliasing
-
Reverse X/Y
-
Deferred image transport
-
Trigger programmable, level, single, bulk, programmable delay
-
Sequence mode (changes the camera settings on the fly)
-
SIS (secure image signature, time stamp for trigger, frame count etc.)
-
Storable user sets
Scope of delivery
- Camera and IEEE 1394b cable (other configurations on request)
Image optimization features:
-
Auto gain (manual gain control: 0 to 32 dB)
-
Auto exposure (manual exposure control: 10 µs to 26.8 s)
-
Auto white balance (GT1910C only)
-
Binning (horizontal and vertical)
-
Color correction, hue, saturation (GT1910C only)
-
Column defect masking
-
Decimation X/Y
-
Gamma correction
-
Three look-up tables (LUTs)
-
Region of interest (ROI), separate ROI for auto features
-
Reverse X/Y
Camera control features:
-
P-Iris and DC-Iris lens control
-
Event channel
-
Image chunk data
-
IEEE 1588 Precision Time Protocol (PTP)
-
RS232
-
Storable user sets
-
StreamBytesPerSecond (bandwidth control)
-
Stream hold
-
Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
-
Tap mode switchable in Vimba Viewer 2.0 or later (four-tap, one-tap)
-
Temperature monitoring (main board and sensor board)
-
Trigger over Ethernet (ToE) Action Commands
-
Compact
-
20 fps @ 1.4 Megapixel
-
Rugged housing
-
Video-type auto iris
-
Video-type auto iris
-
ROI, DSP subregion (selectable ROI for auto features)
-
Binning
-
Auto gain (manual gain control: 0 to 25 dB)
-
Auto exposure (manual exposure controls: 12 µs to 116.8 s)
-
Auto white balance
-
StreamBytesPerSecond (easy bandwidth control)
-
Stream hold
-
Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
-
Global shutter (digital shutter)
-
Recorder and Multiframe acquisition modes
-
Event channel
-
Chunk data
-
Storable user sets
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
IEEE 1588 Precision Time Protocol allows for easy synchronization of multiple cameras and devices on network
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
-
AR0135CS CMOS sensor
-
ALVIUM image processing
-
USB3 Vision
-
Various hardware options
-
Monochrome (1800 U-120m) and color (1800 U-120c) models
-
ALVIUM® Technology for on-board image processing
-
USB3 Vision interface for GenICam SFNC features
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Micro-B USB 3.1 Gen 1 connector with screw locks for industrial applications
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for both embedded and machine vision applications
-
9.2 fps at full resolution
-
Power over Ethernet option
-
Angled-head and board level variants
-
Video-iris lens control
-
Monochrome (G-504B) and color (G-504C) models
-
GigE Vision interface with Power over Ethernet option
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
Allied Vision Technologies
For more than 30 years, Allied Vision has been helping people to reach their imaging goals. Allied Vision supplies camera technology and image capture solutions for industrial inspection, medical and scientific imaging, traffic monitoring and many more application areas in digital imaging.
With a deep understanding of customers’ needs, Allied Vision finds individual solutions for every application, a practice which has made Allied Vision one of the leading camera manufacturers worldwide in the machine vision market.
The company has nine locations in Germany, Canada, the United States, Singapore and China and is represented by a network of sales partners in over 30 countries.
Contact Details
Allied Vision
102 Pickering Way - Suite 502 Exton, PA 19341, USA
Phone: +1-877-USA-1394
Fax: +1 978-225-2030
Imaging/Machine Vision
Download Line Card
Document
