Overview
Specifications & Details
Datasheets & Downloads
Videos

Image optimization features:

Auto gain (manual gain control: 0 to 22 dB)
Auto exposure (manual exposure control: 100 µs to 1 s, 1 µs increments)
Binning (horizontal and vertical) (sum)
Decimation X/Y
Enhanced Defect Pixel Correction (DPC)
Fixed Pattern Noise Correction (FPNC)
Gamma correction
Three look-up tables (LUTs)
Region of interest (ROI)

Camera control features:

EF lens control (order option -18)
Event channel
Image chunk data
IEEE 1588 Precision Time Protocol (PTP)
RS232
Storable user sets
StreamBytesPerSecond (bandwidth control)
Stream hold
Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
Temperature monitoring (main board and sensor board)
Trigger over Ethernet (ToE) Action Commands

Manufactured By: Allied Vision Technologies

More

Prosilica GT4096 is a 16.7 Megapixel camera with a GigE Vision compliant Gigabit Ethernet port and Hirose I/O port. Prosilica GT4096 is offered as monochrome and extended near-infrared (NIR) models. This camera incorporates the high quality ON Semiconductor PYTHON 16K CMOS sensor with In-pixel Correlated Double Sampling (IP-CDS) global shutter technology. At full resolution, this camera runs 7.18 frames per second. With a smaller region of interest, higher frame rates are possible. Prosilica GT4096 is a rugged camera with a robust thermal housing that is designed to operate in extended temperature ranges and fluctuating lighting conditions. It is a large format housing camera with a standard F-Mount lens mount. By default monochrome and NIR models ship with no optical filter.

Benefits and features:

Monochrome (GT4096) and extended near-infrared (GT4096NIR) models
GigE Vision interface with Power over Ethernet
Screw mount RJ45 Ethernet connector for industrial environments
Supports cable lengths up to 100 meters (CAT-5e or CAT-6)
The ON Semiconductor PYTHON 16K is a high sensitivity CMOS sensor
Trigger over Ethernet (ToE) Action Commands allow for a single cable solution
Planarity adjustable (PA) EF Lens Mount (option -18) for electronic control of aperture and autofocus
Standard M3 mounting holes and 1/4-20 tripod mounting holes
Support for popular third party image-processing libraries including Cognex VisionPro, MathWorks MATLAB, National Instruments LabVIEW, Stemmer Imaging Common Vision Blox, MVTec HALCON and MERLIC
Enhanced Defect Pixel Correction feature with a new Defective Pixel List Manager tool that allows you to load different user defined defective pixel lists to match your application and optimize the life cycle of the camera

Options:

Available with F-Mount PA, M58-Mount, M58-Mount PA, EF-Mount PA, M42-Mount, M42-Mount PA
Available with IR cut filter or protection glass

See the Modular Concept for lens mount and optical filters options.

See the Customization and OEM Solutions page for additional options.

Interface

IEEE 802.3 1000BASE-T, IEEE 802.3af (PoE)

Resolution

4096 (H) × 4096 (V)

Sensor

ON Semi PYTHON 16K

Sensor type

CMOS

Sensor size

Type APS-H

Pixel size

4.5 µm x 4.5 µm

Lens mount (default)

F-Mount

Max. frame rate at full resolution

7.18 fps

ADC

10 Bit

Image buffer (RAM)

128 MByte

Output

Bit depth

10 Bit

Monochrome pixel formats

Mono8, Mono10

General purpose inputs/outputs (GPIOs)

TTL I/Os

1 input, 2 outputs

Opto-isolated I/Os

1 input, 2 outputs

RS232

1

Operating conditions/dimensions

Operating temperature

-20 °C to +50 °C ambient (without condensation)

Power requirements (DC)

7 to 25 VDC; PoE

Power consumption

5.0 W @ 12 VDC; 6.4 W PoE

Mass

372 g

Body dimensions (L × W × H in mm)

96 × 66 × 53.3 (including connectors)

Regulations

CE: 2014/30/EU (EMC), 2011/65/EU (RoHS); FCC Class A; CAN ICES-003 Issue 4/5

Quantum efficiency

Prosilica GT Data sheet 4096

Allied Vision Product Lineup V5.0.0

GigE Installation Manual V1.2.0

Prosilica GT Technical Manual V2.9.0

GigE Features Reference V5.3.2

Camera and Driver Attributes

Modular Concept external V10.0.0

Technical papers, knowledge base

3D CAD files (STEP)

Please right-click the link of a 3D camera model and select save as to download the file. After downloading, unzip the STEP file. You need a 3D CAD viewer application to view and measure the STEP files. Download a STEP viewer free of charge: http://www.ida-step.net/

Software and firmware

Vimba is our current future-proof SDK.

Other SDKs and tools are available on our Software downloads webpage.

GigE camera firmware is available on our Firmware webpage.

AVT - Prosilica GT 4096 16.7 MP CMOS machine vision camera for extended temperature ranges