AVT - Alvium 1800 U -120 Versatile USB camera with AR0135CS sensor
-
AR0135CS CMOS sensor
-
ALVIUM image processing
-
USB3 Vision
-
Various hardware options
-
Monochrome (1800 U-120m) and color (1800 U-120c) models
-
ALVIUM® Technology for on-board image processing
-
USB3 Vision interface for GenICam SFNC features
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Micro-B USB 3.1 Gen 1 connector with screw locks for industrial applications
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for both embedded and machine vision applications
Alvium USB cameras are designed for use in both machine vision and embedded applications. Offering high image quality and reducing workload for the host, Alvium enables innovation among system designers. The innovative ALVIUM System on Chip (SoC) performs image corrections and preprocessing tasks onboard the camera instead of the host computer. Unlike FPGAs commonly used in machine vision cameras, the ALVIUM SoC is extremely power efficient. With Alvium, integrating hardware and software can be done effortlessly, which ultimately reduces development time. The ON Semi AR0135CS CMOS sensor enables imaging at 1.2 megapixel and 52 frames per second. Color models ship with an IR cut filter, monochrome and S-Mount models ship without a filter or protection glass.
Hardware options
- Housings: Bare board, open housing, or closed housing
- Various lens mounts: C-Mount, CS-Mount, or S-Mount
- USB connector position: Select between the back panel or the left side of the camera (seen from the sensor side).
For more information on hardware options, including product codes and technical data, such as technical drawings and mass, see the Alvium Cameras Hardware Options document.
Available accessories
- Tripod adapter
- USB 3.1 Gen 1 cable with screw connectors in various lengths
- I/O cables in various lengths
- Various lenses and Allied Vision S-Mount lenses with focal lengths 2.97 - 12 mm
More Product Information

-
Integrated on-board image processing
-
Single board design
-
Easy hardware and software integration
-
Broad range of state-of-the-art sensors
-
Intelligent power management
-
Cost optimized design

-
Type APS-H CMOS sensor
-
IEEE 1588 PTP
-
Power over Ethernet
-
4.59 fps at full resolution
-
Extended near-infrared (GT5120NIR) model
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Planarity adjusted (PA) EF Lens Mount (option -18) for electronic control of aperture and autofocus
-
Easy camera mounting via standard M3 threads at all sides and 1/4-20 tripod mounting hole
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Enhanced Defect Pixel Correction feature with a new Defective Pixel List Manager tool that allows you to load different user defined defective pixel lists to match your application and optimize the life cycle of the camera

-
Versatile 2.8 megapixel camera
-
30.4 fps at full resolution
-
Power over Ethernet option
-
Video-iris lens control
-
Monochrome (G-282B) and color (G-282C) models
-
GigE Vision interface with Power over Ethernet option
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.

-
High SNR mode (up to 24 dB better signal-to-noise ratio)
-
Low-noise binning mode
-
Shading correction
-
Defect pixel correction
-
Area of interest (AOI), separate AOI for auto features
-
Binning
-
Decimation
-
Auto gain (manual gain control: 0 to 24.4 dB)
-
Auto exposure (74 µs to 67 s)
-
Auto white balance
-
Look-up table (LUT)
-
Hue, saturation
-
Color correction
-
Local color anti-aliasing
-
Reverse X/Y
-
Deferred image transport
-
Trigger programmable, level, single, bulk, programmable delay
-
Sequence mode (changes the camera settings on the fly)
-
SIS (secure image signature, time stamp for trigger, frame count etc.)
-
Storable user sets
- Camera and IEEE 1394b cable (other configurations on request)

-
IMX304 CMOS sensor
-
ALVIUM image processing
-
MIPI CSI-2 interface
-
Various hardware options
-
Monochrome (1800 C-1236m) and color (1800 C-1236c) models
-
ALVIUM® Technology for on-board image processing
-
MIPI CSI-2 interface with up to 4 lanes
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Hirose HR FHH55 FPC connector with minimum space requirements for a compact design
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for embedded vision applications
-
Easy-to-install driver and code examples
-
High SNR mode (up to 24 dB better signal-to-noise ratio)
-
Low-noise binning mode
-
Smear reduction
-
Shading correction
-
Defect pixel correction
-
Area of interest (AOI), separate AOI for auto features
-
Binning
-
Decimation
-
Auto gain (manual gain control: 0 to 24 dB)
-
Auto exposure (129 µs to 67 s)
-
Auto white balance
-
Look-up table (LUT)
-
Hue, saturation, color correction
-
Reverse X
-
Deferred image transport
-
Trigger programmable, level, single, bulk, programmable delay
-
Sequence mode (changes the camera settings on the fly)
-
SIS (secure image signature, time stamp for trigger, frame count)
-
Storable user sets

-
17.8 fps at full resolution
-
PoE option
-
Angled-head and board level variants
-
Video-iris lens control
-
Monochrome (G-146B) and color (G-146C) models
-
GigE Vision interface with Power over Ethernet option
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.

-
PYTHON 480 CMOS sensor
-
ALVIUM image processing
-
MIPI CSI-2 interface
-
Various hardware options
-
Monochrome (1500 C-050m) and color (1500 C-050c) models
-
ALVIUM® Technology for on-board image processing
-
MIPI CSI-2 interface with up to 4 lanes
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Hirose HR FHH55 FPC connector with minimum space requirements for a compact design
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for embedded vision applications
-
Easy-to-install driver and code examples

-
Teledyne e2v Sapphire CMOS sensor
-
Switchable shutter modes
-
Power over Ethernet
-
60 fps at full resolution
-
Monochrome (G-192B) and color (G-192C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
Allied Vision Technologies
For more than 30 years, Allied Vision has been helping people to reach their imaging goals. Allied Vision supplies camera technology and image capture solutions for industrial inspection, medical and scientific imaging, traffic monitoring and many more application areas in digital imaging.
With a deep understanding of customers’ needs, Allied Vision finds individual solutions for every application, a practice which has made Allied Vision one of the leading camera manufacturers worldwide in the machine vision market.
The company has nine locations in Germany, Canada, the United States, Singapore and China and is represented by a network of sales partners in over 30 countries.
Contact Details
Allied Vision
102 Pickering Way - Suite 502 Exton, PA 19341, USA
Phone: +1-877-USA-1394
Fax: +1 978-225-2030
Imaging/Machine Vision
