-
Our EuroBrite™ lineup outdoes the competition in so many ways. With more features at a competitive price point, there’s no better value in machine vision lighting:
-
Complete built-in control for continuous and strobe modes.
-
Adaptive Power™, a feature of the EuroBrite™ lighting controller, utilizes an onboard thermistor to maximize light output in continuous mode.
-
Adaptive Overdrive,™ another feature of the EuroBrite™ lighting controller, provides a maximal output pulse in strobe mode regardless of the exposure period.
-
IP67 sealed enclosure suitable for washdown environments.
-
Rugged construction that has been tested to withstand over 1000lb.
-
Industrial grade LEDs providing high-intensity illumination of 85klux (working distance of 100mm).
-
Daisy chain up to 4 for a combined length of 24”.
ACS - Test & Production Automation
More Product Information
-
Operates up to and including 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe 1.0, 2.0 and 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
Supports 1 link of 4 lanes, or dual-port operation of 2 links of 2 lanes each
-
Front-end module plugs into system-under-test
-
U.2 NVMe SSD DUT (not supplied) plugs into the Back-end module
-
Adjustable tray clamps and quick-release latch allow for snug fit and hot swap testing
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supplied with high-quality, custom SFF-8764 cables for Analyzer system attachment
-
Supports side-band signal triggering and capture
-
Supplied power brick makes Interposer power independent of host system
-
LEDs give quick indicators of power and status
-
Works with VIAVI Xgig 4K4 and 4K16 PCIe 4.0 Analyzer/Jammer chassis
-
Provides consistent, repeatable capture of link training, negotiation and other data
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
-
Revolutionary technology advancement for wafer and die-level photonics probing
-
Highest accuracy in test results
-
New innovative combination of hardware and software features to align and optimize fibers/arrays in a wafer-level trench
-
Minimized coupling losses with minimal trench dimensions
-
Industry standard for vertical coupling to wafer-level grating couplers
-
Positioning hardware is precisely calibrated to the probe station and ready to perform die-to-die optical optimizations in minutes
-
Dark, shielded and frost-free
-
-40°C to +125°C
-
Leveraging considerable expertise through an innovative engineering team
-
Pioneering set of automated functions that perform critical calibrations of the optical positioning system to the probe station
-
Exclusive FormFactor-developed automated test methodology
-
Automates manual tasks by integrating probe station machine vision capability with optical positioning and test equipment
-
FormFactor-developed graphical user interface to manually control the optical positioning system
-
Configurable between single fibers, fiber arrays and edge coupling holders
-
Different substrate carriers for wafers up to 200 mm or single dies
-
Probe cards and/or up to eight positioners
-
Probe positioners placed inside vacuum chamber
-
Short and stable probe arms
-
Intuitive, manual drives
-
Front loading capability through load door
-
Software control of chuck for fast step-and-repeat testing of the entire wafer
-
Fast step-and-repeat testing of the whole wafer
Focus’ modular microstrip, high power and ultra low loss coaxial RF Test Fixtures are designed mainly for load pull testing of packaged transistors. All Focus test fixtures come with TRL calibration standards and support most transistor packages sized from less than 0.1″ and up to 1″.
-
Configurable test capability
-
Intuitive user interface
-
Software defined applications
-
Remote operation
-
Android™ and iOS® compatible
-
Guided Test
-
Built-in GPS receiver
-
International test configurations Purchase only the test options that you need
-
Time saving ease of operation
-
Easily updated with future applications
-
Conveniently test in and around the aircraft from your mobile device
-
Recall saved test sequences for future use
-
Provides accurate positional data for ADS-B testing
-
Compliant with global regulatory requirements
-
Tests FMCW radio altimeters including CDF types
-
Tests pulse radio altimeters (non-pulse compression types)
-
Direct-connect to UUT T/R or to installed system via antenna couplers
-
Full RF loop test allows TX, RX, Antenna or Feeder faults to be identified
-
Multi-channel operation (via additional test sets)
-
Programmable multi-leg climb/descend profiles
-
Large touch-screen display with simple user interface
-
Remote control interface USB/LAN
-
Lightweight and compact about 10 lbs. (4.5 kg)
-
Battery 4 hours plus duration
Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes), differential probes measure the difference in voltage of a test point in relation to another test point
-
Combine up to 12 fail-safe building blocks, dual SPDT, SP4T, SP6T, or transfer switch in a compact 1U footprint
-
Front “pluggable” relays facilitate field maintenance
-
Embedded web interface provides interactive utility to monitor and control relays from anywhere in the world
-
Flexible API supports IVI and Linux development environments minimizing software investment
-
LXI Trigger Event implementation provides seamless test synchronization with external devices
-
Store up to 128 relay state configurations for quick recall, including an automatic power up state
-
Define exclude lists to avoid setting an undesirable configuration
-
Relay odometer tracks closures to facilitate preventative maintenance
ACS
ACS designs, engineers, and builds innovative equipment, machines, controls, and facilities for industry leaders in markets including automotive, aerospace, and manufacturing. We are a systems integrator, helping companies maximize their facilities’ efficiency with systems designed and engineered to work together. We combine our knowledge of building design and construction with expertise and understanding of equipment, R&D and production test, process systems, automation, data acquisition, and controls for industry leaders who require high-performance systems. ACS is based in Verona, Wisconsin, with a regional office in Troy, Michigan, and serves customers across North America and around the world.
Contact Details
Affiliated Construction Services (ACS) Headquarters & Manufacturing
633 Liberty Drive, Verona, WI 53593, USA
Phone: 608-663-1590