Oscilloscope Probes
Products
![Teledyne LeCroy - RP4030 Active Voltage Rail Probe Teledyne LeCroy - RP4030 Active Voltage Rail Probe](/sites/default/files/styles/max_650x650/public/title-active-voltage-rail-probe-title.png?itok=JbBeTIJQ)
- Up to 4 GHz Bandwidth
- ±60 V Offset Capability
- ±800 mV Dynamic Range
- 50 kΩ DC Input Impedance
- 1.2x Attenuation for low additive noise
- MCX terminated cable with wide variety of connections:
- Solder-in (4 GHz)
- Coaxial Cable to U.FL receptacle (3 GHz)
- MCX PCB Mount (4 GHz)
- Browser (500 MHz)
- ProBus Interface
![Teledyne LeCroy - Current Probes Teledyne LeCroy - Current Probes](/sites/default/files/styles/max_650x650/public/probe-title-current-probes.png?itok=8-KkGjtY)
-
Easy to Use
-
No need to break the circuit or insert a shunt
-
Small form factors for use on crowded boards
-
-
Variety of Applications
-
Bandwidths up to 100 MHz
-
Peak currents up to 700 A
-
Sensitivities down to 1mA/div
-
-
High Precision Measurements
-
Low frequency accuracy of 1%
-
Integrated autozero capability
-
-
Fully Integrated with Teledyne LeCroy Oscilloscope
-
No additonal hardware is required
-
Power is supplied from oscilloscope ProBus connection
-
Automatic display of waveforms in Amps and calculated power traces scaled correctly in Watts
-
Degauss and Autozero directly from oscilloscope user interface
-
-
DCS025 Deskew Calibration Source
-
Provides ability to precisely deskew most voltage probes along with 30, 150 and 500A current probes
-
![Teledyne LeCroy - Differential Probes (<= 1.5 GHz) Teledyne LeCroy - Differential Probes (<= 1.5 GHz)](/sites/default/files/styles/max_650x650/public/title-differential-probes-title.png?itok=-kjwg8dg)
Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes), differential probes measure the difference in voltage of a test point in relation to another test point
![Teledyne LeCroy - High Voltage Differential Probes Teledyne LeCroy - High Voltage Differential Probes](/sites/default/files/styles/max_650x650/public/title-high-voltage-differential-probes-title.png?itok=KITvfiCH)
The PPE6KV-A and HVP120 can handle up to 6000 Vpeak transient overvoltages and are designed for probing up to 2000 Vrms and 1000 Vrms respectively. Fast rise times, excellent frequency response, and a variety of standard accessories make these probes safe and ideal for high voltage measurement applications
![Teledyne LeCroy - Passive Probes Teledyne LeCroy - Passive Probes](/sites/default/files/styles/max_650x650/public/title-passive-probes-title.png?itok=o38Nwxwp)
-
Compact probe head
-
Supports fine pitch SMD probing
-
Rugged, Sharp tip
-
HF optimized connection accessories
-
Over 30 accessories
-
Low input capacitance
Probe adapters provide simple and easy interface of third-party probes as well as change between the different Teledyne LeCroy Oscilloscope input and cable types (ProBus, ProLink, K/2.92 mm, BNC and SMA). Depending on the adapters, changing between the Teledyne LeCroy Oscilloscope's input type may have an effect on the overall performance of the channel.
- Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
- Automatic probe detection
- Provides all necessary power and offset control to the attached probe
- Supports probes up to 4 GHz
- Easy firmware updates
- Wide variety of probes supported including: Preamplifiers, Current Probes, Single-Ended Active Probes and Differential Active Probes