Teledyne DALSA - LT Series Board Level USB3 Vision Board Level Cameras
- Latest Global and Rolling Shutters sensors from Sony® - from 2 to 12 MP
- USB3 Vision interface
- Compact fully-enclosed design with features needed by modern vision systems
- Provide advanced vision performance while using less power, less space, and fitting increasingly tight industry budgets
The Lt Series Board Level Cameras offer a smaller, lighter, and lower cost imaging solution. Equipped with the latest rolling shutter Starvis™ CMOS sensors and global shutter Pregius™ CMOS sensors from Sony®. They range in resolution from 1.7 – 12 megapixels providing the flexibility to meet the requirements of a wide variety of imaging systems. These Board Level Cameras are designed specifically to meet the challenges of today’s embedded systems with design considerations such as, connectors on the side of each camera so applications can take advantage of shorter cable lengths, and a flat-back design that minimizes the space required for vision systems.
Models
|
Model Number |
MP |
FPS |
Pixel Size (μm) |
Spectrum |
Sensor |
|---|---|---|---|---|---|
|
1.7 |
96 |
9 |
Color |
Sony IMX432 |
|
|
2 |
86 |
4.5 |
Color |
Sony IMX430 |
|
|
2.1 |
60 |
2.9 |
Color |
Sony IMX327 |
|
|
2.3 |
162 |
3.45 |
Color |
Sony IMX392 |
|
|
3.1 |
55 |
3.45 |
Color |
Sony IMX265 |
|
|
5.1 |
35 |
3.45 |
Color |
Sony IMX264 |
|
|
7.1 |
50 |
4.5 |
Color |
Sony IMX428 |
|
|
8.2 |
44 |
2 |
Color |
Sony IMX334 |
|
|
12.3 |
22 |
3.45 |
Color |
Sony IMX304 |
|
|
8.9 |
31 |
3.45 |
Color |
Sony IMX267 |
|
|
1.7 |
96 |
9 |
Mono |
Sony IMX432 |
|
|
2 |
86 |
4.5 |
Mono |
Sony IMX430 |
|
|
2.3 |
162 |
3.45 |
Mono |
Sony IMX392 |
|
|
3.1 |
55 |
3.45 |
Mono |
Sony IMX265 |
|
|
5 |
35 |
3.45 |
Mono |
Sony IMX264 |
|
|
7.1 |
50 |
4.5 |
Mono |
Sony IMX428 |
|
|
8.2 |
44 |
2 |
Mono |
Sony IMX334 |
|
|
12.3 |
22 |
3.45 |
Mono |
Sony IMX304 |
|
|
8.9 |
31 |
3.45 |
Mono |
Sony IMX267 |
More Product Information
- This DCS Series Controller provides Lighting Control Flexibility in a slim 112 mm x 124 mm x 23 mm package.
- Plug-n-Play compatibility with Ai lighting Products, featuring SignaTech™ technology.
- Seamless switching from continuous-on to gated on/off and strobe overdrive; 3 independently configurable trigger inputs.
- Din-rail mount, UL 508a Panel listed and GUI, Web Browser or command line setup and control tools, SDK.
- 1 output, 3 channels – designed to drive multi-channel RGB / segment lights, as well as single higher current draw lights.
The SMX-6xxx product family includes the SMX-6101 (pictured), SMX-6103, SMX-6106, SMX-6111, SMX-6115, SMX-6116, and SMX-6144.
-
Complete Test Solutions
-
Complete test solutions for emissions and immunity compliance testing of AC and DC powered products
-
-
Single & Three Phase Operation
-
Offers flexibility
-
-
Direct PC Bus Access
-
Provides high sampling rate and resolution for accurate measurements and high speed data transfers
-
-
PC based harmonic & flicker testing
-
provides real-time full color data display updates and continuous PASS/FAIL monitoring.
-
-
Supports Global Standards
-
Supports European and Japanese standards
-
-
Easy To Use Interface
-
Provides IEC test setup, data analysis, display, MS Word test reports, and data files are generated in MS Excel format
-
-
High resolution
-
Data storage to disk in for post-acquisition analysis and reporting
-
-
Single Step
-
Single Step and Fast Forward replay of recorded test data at 200 mSec
-
With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.
-
Easy to Use
-
No need to break the circuit or insert a shunt
-
Small form factors for use on crowded boards
-
-
Variety of Applications
-
Bandwidths up to 100 MHz
-
Peak currents up to 700 A
-
Sensitivities down to 1mA/div
-
-
High Precision Measurements
-
Low frequency accuracy of 1%
-
Integrated autozero capability
-
-
Fully Integrated with Teledyne LeCroy Oscilloscope
-
No additonal hardware is required
-
Power is supplied from oscilloscope ProBus connection
-
Automatic display of waveforms in Amps and calculated power traces scaled correctly in Watts
-
Degauss and Autozero directly from oscilloscope user interface
-
-
DCS025 Deskew Calibration Source
-
Provides ability to precisely deskew most voltage probes along with 30, 150 and 500A current probes
-
- High power density DC power supply in a 1U chassis (up to 5 kW) or a 2U chassis (up to 10 kW)
- Intuitive touch panel control
- Available in either Fixed or Autoranging output
- Multi-language display for global operation
- Auto paralleling for higher power
- Full remote control via Virtual Panels™
Teledyne DALSA
Teledyne DALSA is an international leader in high performance digital imaging and semiconductors with approximately 1000 employees world-wide. Established in 1980 and acquired by Teledyne Technologies in 2011, Teledyne DALSA designs, develops, manufactures, and markets digital imaging products and solutions, in addition to providing semiconductor products and services. Our core competencies are in specialized integrated circuit and electronics technology, software, and highly engineered semiconductor wafer processing.
Teledyne DALSA exists for the long term. Our goal is to build upon our 30 year heritage of developing the world's leading high performance digital imaging and semiconductor solutions and to accelerate our level of innovation. We focus on R&D development but also draw on the capabilities available to us as part of a larger organization. We seek to deliver products and technology that are truly innovative so that we can help our customers succeed.
Contact Details
Teledyne DALSA Headquarters
605 McMurray Road, Waterloo, Ontario, Canada N2V 2E9
Phone: 519-886-6000
Fax: 519-886-8023
Imaging/Machine Vision
Download Line Card
