• Boresite -18.5° to +45°
• Height range 1.0 - 4.0m
• Pneumatic polarization change 90°
• Electric stepper motor height

• 3,000kg capacity
• Adjustable axle length and width
• 120k/hr max speed dynamometer

Free-standing turntable for anechoic Chambers.

• Diameter 1.2 m
• Load capability 300 kg
• Height 140 mm

Other diameters and load capabilities are available on request.

EMI Camera for Low Emission / High Field Use

• 30x Optical Zoom
• Low light uses 0,05 lux (day) and 0,005 lux (night)
• Integrated microphone
• Battery or wall-powered
• Single Fiber operation (duel direction)
• Local controls on back (zoom/pan/tilt/focus/..)
• Options for Pan/Tilt, Joystick, HIRF, recording, motion triggering, OCR, ...

The optoCAN-FD system can be used for the bidirectional optical transmission of CAN-signals with transmission rates of up to 10 Mbit/s. It consists of two identical battery supplied transceivers connected to each other with an optical fiber. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.

• 10kHz to 30MHz
• Adjustable height 1.5 to 3.5m Strip-line
• Full vehicle testing
• Mil-STD-464 & ISO 11451-2

See "Specifications & Details" tab for more information.

NEMP110-G- RS105 GTEM Test System

• MIL-STD-461 RS105 Compliance: Fully meets NEMP immunity testing standards.
• High Voltage Performance: Generates up to 50 kV/m fields with nanosecond rise times.
• Adaptable GTEM Design: Supports retrofitting of existing GTEM cells for NEMP testing.
• Automated Testing: Streamlined control, data collection, and report generation.
• No Environmental Disturbance: Safe operation without affecting nearby systems.
• Flexible Testing Capability: Accommodates small to medium-sized devices with a 110 cm septum height.

• Automatic calibration for the whole test frequency range 
• Application of all test frequencies automatically. The level can be selected or automatic. 
• NO need to manually configure the measurement equipment 
• NO need to manually integrate the transfer function of probes and attenuators 
• Generation of test reports: NO need to record all values read from the measurement equipment 
• Generation of calibration reports: NO need to record all calibration setting parameters 
• Rack together and add CS101, CS109, and RS101 (sections 18, 19, and 20 of the RTCA DO-160G are also available.)

• Compliance: Meets MIL-STD-461 RS105 standards for NEMP testing.
• High Precision: Generates a minimum electric field of 50 kV/m, with higher fields available for smaller devices.
• Portable Design: Easy-to-move frame and compact setup for versatile placement.
• User-Friendly: Controlled via computer with RS232 and USB interfaces.
• Versatile Testing: Ideal for assessing EUTs up to appox. 5.5m x 3m x 1.5m.            
• Robust Specifications: Quick rise time of 2.3 ns and pulse length of 23 ns, ensuring accurate and reliable results.

• Test to international and automotive standards (IEC 61967-2, SAE J1113-25 J1752-3)
• Use in ordinary facilities. No Chamber required
• Test upt 3GHz (depending on Model)

• MIL-STD-1275E Compliant: Dedicated design for conducted susceptibility testing on 28VDC circuits.
• Spike & Surge Testing: Handles spikes up to 260V / 2J and surges up to 200V / 470J.
• High Current Capability: 16A continuous or up to 400A with the optional DM400 decoupling diode module.
• Adjustable Waveforms: Configurable rise times, pulse durations, and voltages for precise test conditions.
• User-Friendly Control: Remote interface via RS232 or USB, with optional control software for automated testing.

Enhance your EMC testing with the PG1275E Pulse Generator—precision, compliance, and versatility combined.