Schloder - RTCA DO 160 Sec 18&19 Magnetic Immunity Test Set
The compact magnetic field generator and analyzer MGA 1033 allows susceptibility tests against magnetic fields from DC to 250 kHz according to the standard EN 55103-2 and their measurement according to EN 55103-1. In addition, EMC tests are possible according to various standards such as automotive, avionic and MIL-STD.; Generation of magnetic fields from DC to 250 kHz; Field strength up to 1000 A/m; EN 55103-1/2, MIL-STD 461, Automotive etc.; Accessories: Loop sensors, Helmholtz coils etc.;
MGA 1033
- MIL-STD-461
- ISO 11452-8
- DO-160 Section 18 / 19
- Automotive, IEC 61000-4-8 etc.
Any interference has the potential to prevent smooth operation. Only legally compliant testing ensures the interference immunity of systems. For over 30 years, Schlöder has stood for high-performance test and measurement technology from its development and production. Contemporary high-tech that meets all requirements of manufacturer and industry certification - worldwide. In short, whatever your needs are, Schlöder advises you expertly, individually, and promptly - and is your partner in magnetic field generators and analyzers!
What is the magnetic field generator / analyzer MGA 1033?
Measure and generate magnetic fields? The MGA 1033 is a compact test system for generating magnetic fields in the frequency range from DC to 250 kHz. The Schlöder magnetic field generator and analyzer have an integrated high power amplifier: This allows us to easily achieve different high field strengths as required by military and automotive standards. Depending on the requirements your instrument has to meet, we will advise you on which additional device we can use to realize this.
What are the advantages of the Schlöder MGA 1033?
In combination with a triaxial Helmholtz coil such as the MGA HCST 50-28, you can generate field strengths of 1000 A/m in the frequency spectrum from DC to 1 kHz. Testing could hardly be simpler: The triaxial design makes it possible to generate the magnetic fields automatically in all three spatial axes without having to rotate the EUT for this purpose! EMC tests that comply with various standards such as automotive, MIL-STD as well as avionic are possible with this test device. If you combine the magnetic field generator with coupling transformers, you can perform the following tests with the MGA 1033:
- MGA ISS-19 - Tests according to DO-160, Section 19,
- MGA CT 50-DO-160 - tests according to DO-160 Section 18,
- MGA CT 50-CS101 / MGA CT 100-CS101 - tests according to MIL-Std-461.
How is the MGA 1033 magnetic field generator constructed?
The MGA 1033 consists of the following three independent modules, which can also be used individually as a stand-alone device:
- Signal generator, DC - 250 kHz
- Power amplifier 800 W output power, DC - 1 MHz bandwidth
- Spectrum analyzer 16-bit, 1 MS/s sampling rate
Even though we initially developed the MGA 1033 for the measurement and generation of magnetic fields, the innovative flexibility of the modules opens up many other possible applications for measurements and tests.
Product Features
- 3 independent modules:
- Signal generator (DC - 250 kHz),
- Power amplifier (800 W output power, DC - 1 MHz bandwidth),
- Spectrum analyzer (16 bit, 1 MS/s sampling rate)
- Magnetic field measurements and tests from DC to 250 kHz
- Field strengths up to 1000 A/m up to 1000 Hz
- Tests with magnetic field requirements for ISO 11452-8, MIL-STD-461, IEC/EN 61000-4-8, SAE J1113-2, SAE J1113-22, Ford ES-XW7T-1A278-AC, PSA B217110, Renault 36-00-808, DC-11224, DC-10614, others. Since standards are constantly adapting or expanding, we are happy to check whether accessories are required in combination with the MGA 1033.
- Measurements and tests additionally part of the application software for MIL-STD-461 (CE101, CS101, CS109), EN 61000-4-16, IEC / EN 61543)
- Application software for Microsoft Windows, preset parameters/limit values, transfer of own routines possible
- Data transfer from external multimeter via serial port
- Accessories: coils, adapters, coupling devices according to IEC / EN 61000-4-8, ISO 11452-8, MIL-STD-461, etc.
- Compliant to all relevant EMC, automotive and military standards
- Fully automatic testing with optional triaxial Helmholtz coil
What accessories are available for the MGA 1033 Magnetic Field Generator / Analyzer?
Like every Schlöder GmbH product, the MGA 1033 is complemented by a powerful portfolio of accessories. With our field coils and sensor coils, you can easily generate and measure magnetic fields. Homogeneous magnetic fields and field strengths from 1000 A/m to 1 kHz can be generated with single or triple-axis Helmholtz coils such as HCS 50-28 and HCST 50-28. In the MGA 1033, they work with the optional MGA 1032 compensation board to compensate for coil inductance. As a result, the MGA 1033 meets numerous magnetic field requirements of the EMC and military standards MIL-STD 461. If you want to perform tests for conducted immunity on power lines according to MIL-STD-461, CS 101, our coupling transformer is used. Because this operates with a differential amplifier due to the high common-mode voltage on the line side, the coupled differential voltage can be measured without any problems.
MGA 1033 accessories:
- Helmholtz coils
- Helmholtz coil for direct current
- Sensor and field coils
- Hall sensor
- Field coil
- Test adapter
- Coupling transformer, DO-160 Sec. 19
- Coupling transformer, MIL-STD-461, CS101
Fully automatic tests
Combined with a Triax-Helmholtz coil, you can test EUTs in three axes with this magnetic field generator. Particularly practical: You do not have to rotate the EUT for this. With the MGA 1033, magnetic field strengths up to 1000 A/m at frequencies from DC to 1 kHz are no problem; smaller field strengths can be realized up to 250 kHz.
Calibrate Helmholtz coil
You can calibrate the Helmholtz coil by combining it with a sensor coil (RLS 133 or LS 133). Alternatively, you can use your own, customer-specific coils. A calibration mode in the MGA 1033 software allows you to connect further test equipment.
Self-calibration
Due to the highly stable voltage source of the Schlöder MGA 1033, self-calibration is also possible. Here, the correction values are stored in an internal EEPROM. This self-calibration is fast and uncomplicated: All relevant device units are included in the process - an automatic process completed in about one minute.
What is a Helmholtz coil?
Two flat, circular coils sit spaced apart on an axis - with current flowing through them in the same direction. In the center between the coils, a zone of homogeneous magnetic field is created. At the same time, the special arrangement of the Helmholtz coil allows a homogeneous magnetic field to be built up.
|
Type |
Description |
|---|---|
|
MGA 1033 |
Generator/analyzer for magnetic field tests/measurements according to ISO 11452-8, EN 55103-1/2, MIL-STD-461 and similar standards frequency range: DC - 250 kHz; amplifier: 50 V / 16 A; scope of delivery: power cable, USB cable, system software WIN NT/2000/XP/ Vista 7/10 |
|
MGA 1032 |
Option: compensation board for MGA 1033; for compensation of the coil inductance of MGA HCS 50-28 TAP and MGA HCST 50-28 TAP (for field strengths up to 1000 A/m up to 1000 Hz) |
|
MGA LS 040 |
Loop sensor 40 mm (acc. to MIL-STD-461E RS101) including 3m cable, calibration sheet |
|
MGA RL 120 |
Radiating loop 120 mm (acc. to MIL-STD-461E RS101) including 3m cable, calibration sheet |
|
MGA RL 120-80 |
Radiating loop is used for DC and low-frequency testing to generate higher fields. Including 3m cable, calibration sheet |
|
MGA LS 133 |
Loop sensor 133 mm (acc. to MIL-STD-461E RE101) including 3m cable, calibration sheet |
|
MGA RLS 133 |
Radiating / loop sensor 133 mm (acc. to EN 55103-1/2) including 2 x 3m cable, calibration sheet |
|
MGA Hall Sensor |
Measurement sensor for DC-9.9Hz field setting, 3m cable, calibration sheet |
|
MGA HCS 125-75 |
Helmholtz coil with a center tap; for tests according to MIL-STD-461, EN 55103-2, SAE J1113-22, and others; frame length 125 x 125 cm, distance 75 cm; incl. cable set, 3 m |
|
MGA HCS 100-60 |
Helmholtz coil 1 axis 1.00 x 1.00 m, for tests according to MIL-STD-461, EN 55103-2, SAE J1113-22 and others, distance 0.60 m, incl. cable set, 3 m |
|
MGA HCS 50-28 |
Helmholtz coil with a center tap; for tests according to MIL-STD-461, EN 55103-2, SAE J1113-22 and others; frame length 0.5 x 0.5m, distance 0.28 m; incl. cable set, 3 m |
|
MGA HCR 50-25 |
Helmholtz coil for direct current, 1-axis, for tests according to MIL-STD-461, EN 55103-2, SAE J1113-22, and others int. Ø 0.44 m, distance 0.25 m, incl. cable set, 3 m |
|
MGA HCST 50-28 |
Triaxial Helmholtz coil with center tap; for tests according to MIL-STD-461, EN 55103-2, SAE J1113-22 and others; continuous current: 16 A;sSize: 50 cm x 46 cm x 42 cm, incl. cable set, 3 m |
|
MGA BC 500 |
The 50 cm, 20 Windings field coil is mainly used for immunity tests tests. The field coil is used when the dimensions of the device |
|
MGA CT 50-CS101 |
Coupling transformer 50Amp for tests according to MIL-STD-461 / CS101, DO-160 Section 18; in connection with MGA 1033; contains resistance 0.5 Ohm / 100 W (actively cooled) and differential amplifier; Incl. power supply and cabling |
|
MGA CT 100-CS101 |
Coupling transformer 100Amp for tests according to MIL-STD-461 / CS101, DO-160 Section 18; in connection with MGA 1033; contains resistance 0.5 Ohm / 100 W (actively cooled) and differential amplifier; Incl. power supply and cabling |
|
MGA ISS-19 |
Coupling device for tests according to DO-160, Section 19 (19.3.1, 19.3.2, 19.3.3) in connection with MGA 1033; incl. power supply and cabling |
|
MGA B1 |
Common mode test adapter acc. to Fig. B.1 (EN 55103-2) |
|
MGA B2 |
Calibration network acc. to Fig. B.2 (EN 55103-2) |
|
MGA B4 |
Current transducer incl. correction network acc. to Fig. B.4. (EN 55103-2) |
|
MGA SO CE101 |
Software upgrade MIL-STD-461E / CE101 |
|
MGA SO CS101 |
Software upgrade MIL-STD-461E / CS101 |
|
MGA SO CS109 |
Software upgrade MIL-STD-461E / CS109 |
|
MGA SO 4-16 |
Software upgrade EN 61000-4-16 (accessories see separate data sheets) |
More Product Information
- Up to 65 GHz
- Up to 80 Channels @ 36 GHz
- Up to 160 GS/s
- Up to 512 Mpts/Ch
- 50 fs rms Sample Clock (Intrinsic) Jitter
- Jitter Between All Channels of <130 fs rms
20 ppm calibrator of DC process signals designed for calibration of evaluation units and process multimeters under demanding industrial conditions. Includes RTD and resistance source.
- 20 ppm accuracy
- 13°C - 33°C reference temp. range
- 100 V @ 25 mA output capacity
A high performance RF-shielded EMC chamber specifically designed for emc measurements in accordance with MIL-STD-461E/F and RTCA DO160 requirements.
The Mission Recorder Cockpit Remote Control Unit is mounted in a cockpit dashboard and connect to a recorder system. The MCRCR shows status information on the NVG compatible display and can remote control the Mission Recorder System.
The ENERTEC™ mission data processing and distribution units are dependable, cost-effective solutions designed to facilitate field and mission data handling, processing, storage, analysis, and distribution. These units are compatible with both manned and unmanned ground, air, and sea vehicles, offering a dependable resource. Each unit undergoes rigorous testing and validation, adhering to industry-standard testing procedures such as DO-160 and MIL-STD-810.
- Part of the MicroBrite™ family of high performance, compact machine vision lights.
- Produces an intensity level of 41kLux (working distance of 180mm).
- Available in several sizes including 50mm, 100mm, 160mm and 200mm.
- Automatic calibration for the whole test frequency range
- Application of all test frequencies automatically. The level can be selected or automatic.
- NO need to manually configure the measurement equipment
- NO need to manually integrate the transfer function of probes and attenuators
- Generation of test reports: NO need to record all values read from the measurement equipment
- Generation of calibration reports: NO need to record all calibration setting parameters
- Rack together and add CS101, CS109, and RS101 (sections 18, 19, and 20 of the RTCA DO-160G are also available.)
The VS1410 is a video & data recorder/server packaged in a rugged compact chassis (3.75” x 5.75” x 7.36” / 6.4 lb), for recording on a Removable Memory Module (RMM).
Recorded data can be replayed in a standard PC/Windows® environment, using specific or COTS mission debrief solutions for post mission analysis. In addition, typically for ISR applications, data can be replayed while recording on board.
The ENERTEC™ mission data processing and distribution units offer cost-effective and dependable solutions for acquiring, processing, storing, exploiting, and disseminating field and mission data.
These units are suitable for both manned and unmanned ground, air, and sea vehicles. They undergo rigorous validation and formal qualification testing, adhering to standard test methods such as DO-160 and MIL-STD-810.
The VS1510 is a video & data recorder/server packaged in a rugged compact chassis (4.92” x 5.75” x 7.28 ” / 9.9 lb), for recording on a Removable Memory Module (RMM).
Recorded data can be replayed in a standard PC/Windows® environment, using specific or COTS mission debrief solutions for post mission analysis.
In addition, typically for ISR applications, data can be replayed while recording on board. The ENERTEC™ mission data processing and distribution units offer cost-effective and dependable solutions for collecting, processing, storing, utilizing, and sharing field and mission data.
These units are designed for both manned and unmanned ground, air, and sea vehicles. They undergo rigorous validation and formal qualification testing, conforming to established standards such as DO-160 and MIL-STD-810.
- Ideal for GaN and SiC devices
- Highest system accuracy
- Fastest rise time
- High CMRR - 160 dB
Absolute EMC
Absolute EMC LLC is a premier North American provider of electromagnetic compatibility (EMC) expertise and test equipment. They deliver end to end consulting—covering IEC, MIL STD, CISPR, and automotive standards—hands on training for all EMC and RF test instruments, and turnkey test system design and integration. Leveraging decades of experience with every major manufacturer and the latest technologies, they also offer strategic guidance on equipment selection, market trends, and procurement to help you maximize the performance and ROI of your EMC investments.
Contact Details
Absolute EMC LLC
8240 Rugby Road, Manassas Park VA 20111, USA
Phone: 703-774-7505
Email: info@absolute-emc.com
Test & Measurement
Download Line Card
