See "Specifications & Details" tab for more information.

See "Specifications & Details" tab for more information. 

• DC - 200 kHz bandwidth DC
• MHz (small signal -3 dB)
• Output voltage ±75 Vpk
• Rise / fall time 100 V/µs
• USB interface standard, LAN optional
• Analog control input 0 ... ±10 V for control of voltage and current
• Monitor outputs for measured voltage and current values (not all models)
• Modularly extensible via master-slave mode
• Parallel and Series Connections for two or more units

• Protocol reports
• Generation of waveforms with synchronous data acquisition
• Modular Expandable
• Individual Waveform Generation
• Standard Libraries included
• Unlimited Waveform size
• 2 different Waveforms synchronously
• DLL's for LabView, Vector CANoe / CAPL, C#, C++, ANSI C, Python, etc.
• Simulation of imported oscilloscope waveform

• Full Compliance – Meets all ISO 7637-4 test requirements
• Pulse A Testing – Simulates MOSFET/IGBT switching noise (100 kHz – 10 MHz)
• Pulse B Testing – Low-frequency sinusoidal disturbances (3 kHz – 300 kHz)
• High-Power RF Amplifier – 75W output (100 kHz – 400 MHz) for clean signal generation
• Burst Generator – Supports configurable burst parameters (1–1000 cycles)
• Power Meter & Directional Coupler – Accurate transient measurement (100 kHz – 10 MHz)
• Integrated Transformer – Isolates high-voltage circuits & prevents transient damage
• Scalable & Modular – Configurable for custom DUT testing needs
• Turnkey Solution – Includes generator, amplifier, coupler, and switching solutions

• Frequency Range:
  • 10 kHz - 30 MHz Conducted
  • 5 MHz - 1GHz Radiated
• Frequency step:
  • 10/500 kHz switchable CE
  • 5/10 MHz switchable RE
• Includes: Generator, antenna, charger, wood case

• 1 - 6 GHz, 40dB Gain, 2.5dB N.F.
• Compensation long cable loss for EMI Measurement
• Improve system noise floor flatness
• High EMI performance
• High linearity LNA for EMI measurement
• High dynamic range
• Unconditionally Stable
• State-of-the-Art Technology

EMI Measurements:

• FFT-based dual-channel receiver
• According to CISPR16-1-1
• Peak, Quasi-Peak, and Average Detectors
• Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
• The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)

• Multi Tester with 16AMP CDN
• EFT/Burst 5kV IEC 61000-4-4
• Surge, Combination Wave 7kV IEC 61000-4-5
• Surge Magnetic field IEC 61000-4-9 (MSURGE-A loop antenna required)
• Ring Wave, 7kV IEC 61000-4-12 & ANSI
• Telicomm Wave, 7kV IEC 61000-4-5 & ITU
• AC Dips/Drops IEC 61000-4-11 (DIP 116 dips transformer required)
• DC Dips/Drops IEC 61000-4-29 (2x DC supplies required)

See "Specifications & Details" tab for more information.

The EMC test system is designed for testing electromagnetic immunity of the electrical installation of vehicles and components against supply line transients. EMC - Test Equipment for the electrical installation of vehicles.

• Pulse #1 1-5/2000us, 600 V
• #1 1-5/1000us, 600 V
• Pulse #2a 1 / 50us, 600 V
• Pulse #3 5/100 ns, 800 V

The LSProbe 1.2 Variant E Field Probe is a high-speed, high-accuracy, and high-dynamic range electric-Field probe.

• Its standard frequency range of 10 kHz – 8.2 GHz. 1,000 V/m
• Best-in-class compensation of linearity, frequency, and temperature guarantees accurate measurements from less than 0.1 to at least 1,000 V/m.
• A dynamic range of 100 dB is achieved for many frequencies, enabling Field measurements at more than 10,000 V/m.
• Customized high Field-strength „X“-variants, supporting up to 30,000 V/m and a damage level of 100,000 V/m, are available upon request.