This compact EMC Chamber with a 3 meter test range will settle into test areas of limited space while continuing to produce exceptional performance for EMC measurement. Emission test volumes of up to 1.5m are accommodated with very repeatable results. Suitable for EMC pre-compliance emissions and EMC compliance immunity testing.

The EH1840 EMC horn combines stable gain performance and low VSWR with wide band frequency operation. The horn is single linearly polarized with excellent cross-polar discrimination. The unique horn design suppresses any possible excitation of higher order modes in the aperture and maintains a well-defined smooth radiation pattern in the direction of the boresight axis throughout the operational bandwidth.

• Fit Anywhere: from Ø0.94×2.95″, weight < 2.46 ounces
• Autonomous: Internal recording, optional battery cell, low-power design
• High Accuracy: 0.2% typ. over the temperature range SNR > 100dB
• Easy to Install: Cylindrical shape compatible with standard pipe clamps
• Easy to Configure: Wireless configuration, sync. and streaming
• Designed for Harsh Environments: -40°C / +85°C, waterproof, shocks, vibration, EMI/EMC

MVG supplies a range of ferrite tiles for EMC test chambers where space is limited. Ferrite tiles complement or subtitute pyramidal absorbers to save space in the anechoic chamber.

Surface-Mount Device (SMD) Photo-MOSFET relays optimized for automated assembly and compact designs. These relays provide high performance in signal integrity and are ideal for consumer electronics and instrumentation.

The Gold standard for EMC Anechoic Chambers, this 10 meter test range ensures EMC compliance testing Emission and Immunity testing and is compliant to ANSI C63.4/CISPR-16-1-4 with a Test Volume diameter of 4 meters or greater. The most versatile and accurate of EMC test chambers. Ferrite tiles and hybrid pyramidal absorbers allow for high accuracy and performance while meeting compact space requirements.

Our reverberation chamber is particularly suited for immunity testing for EMC measurement and special applications for very high-field strength applications (200V/m - 7000V/m). The paddle system ensures that the widest range of frequencies and particularly low frequency performance is maximized. This system meets testing requirements of the IEC61000-4-21 EMC testing specification.

The CISPR25 emc chamber is designed for emc compliance benchtop testing of automotive components and wiring harnesses . The MVG CISPR25 emc chamber is designed for the emc measurements using the requisite 1 m test distance and for a “typical bench” configuration of 2.5 m x 1.0 m. The unique design requires less volumetric space than traditional absorbers and still provides the volume required to have the requisite distances between the EUT and the walls and the emc absorber and the walls & ceiling. The chamber is designed with anechoic treatment that meets the specified attenuation in the CISPR 25 standard, and it is designed to meet the Long Wire testing specified in Annex J. The polypropylene emc absorber does not undergo the typical age-related deterioration of the typical “foam” polyurethane absorbers. The UH-series, polypropylene emc absorber is also applicable to the radar pulse testing required in some automotive test standards.

• Dual Voltage ranges that support over-voltage testing on 480V-based systems 
• Separate terminal blocks for single-phase and three-phase AC power supply outputs 
• High Power AC and DC Source 
• Auto paralleling for higher power system expansion 
• Single and three-phase modes 
• Arbitrary & Harmonic Waveform Generation 
• Standard LXI LAN, USB, and RS-232, Optional GPIB 
• Step, list, and pulse voltage transients with down to 500usec resolution 
• Complete avionics power quality test suites 
• 15kVA to 1MVA Power Levels 
• Intuitive 5” color display for ease of navigation 
• Internationally accepted test routines for EMI/EMC, Safety Compliance