• Calibration-grade metrology standards
• Used for VNA calibration and/or calibration validation

Shielded, coaxial opens are used in the calibration of vector network analyzers to provide a nominal 180° phase offset from a compatible reference short over a wide range of frequencies. At these frequencies, open circuit terminations are inherently imperfect. Shielding the open essentially eliminates radiation loss, but creates a residual frequency-sensitive capacitance. An accurate knowledge of the open’s effective capacitance is essential to an accurate calibration of the analyzer. Maury opens are characterized for effective capacitance versus frequency by means of a fourth order polynomial curve fit, and the nominal capacitance coefficients are provided with each unit.

• NEO 941 parts are AS5836 compatible (Clam Shell Clamps not Included)
• NEO 942 parts are AS1653 compatible (Clam Shell Clamps not Included)

• Directly compatible with most commercial VNA’s
• Available as polynomial and characterized device kits
• Measure S-Parameters with uncertainty when used in conjunction with Maury’s Insight software platform

Maury offers coaxial and waveguide VNA calibration kits.

Coaxial calibration kits are offered in Polynomial SOLT, Characterized Device (CD) SOLT, and TRL, depending on the connector series. Where available, CD kits improve calibration accuracy when compared to SOLT kits based on polynomial definitions as each calibration kit is provided with individually characterized short, open and fixed load standards, whose S-parameters can be loaded into commercial VNAs directly or when used with Maury’s Insight™ software platform. When combined with Insight™, users will be able to quantify the uncertainty contribution of their calibration kit to their overall measurements. CD cal kits result in TRL-like accuracy with fixed-load SOLT ease-of-use.

• 1U 19” rack mount 
• Dual Redundant hot swappable Power Supplies 
• Dual GPS Disciplined Modules

• Low Noise
• Excellent line/load regulation
• Remote sense
• Coarse and fine voltage controls
• Constant voltage or constant current operation with automatic crossover and mode indication
• Individual On/Off switch per output (not including fixed output)
• Variable ( 1.5V to 5V ) Auxiliary Output
• Shrouded socket-compatible with bare wire and shrouded safety plug connections up to 4 mm

Very useful where space is restricted, the EMC chamber EMC-MC will settle into almost any office space. Its small overall size results from the use of our modular SmartShield chamber lined with our AEPH HyPyr-LossTM absorber technology requiring less volumetric space than in a traditional chamber. This mini compact EMC chamber is applicable in EMC pre compliance and general Research & Development RF testing.

• Dual-channel and differential voltage measurements
• 1% accuracy at full scale
• True RMS response below 30 mV
• Optional low-frequency probe for measurements from 10 Hz to 100 MHz
• DC recorder output
• IEEE-488 interface standard, RS-232

The 9240 series is the latest addition to the popular 9200 series of RF voltmeters. It combines accuracy, smart probes, and operator features that have never before been available in its price range. It is simple to use on the bench, and comprehensive enough to integrate into an ATE system. Boonton’s proven voltage probes directly measure from 200 μV to 10 V with usable indication as low as 50 μV and have true RMS response below 30 mV.

• Robust case seals against extraneous light
• Central control unit
• Semi-automatic focussing and illumination
• Safe from impacts and vibrations
• Quasi shadow free transmitted light
• Optimal system status for lighting, optics and camera
• A measurement with 2 cameras is possible
• Adjustable operation distance for 2D measurements in laboratories
• Very precise measurement due to high resolution sensors
• Standardised individual components
• Very easy measuring procedure
• Suitable software VELOX and CAQ-System ProCable available

Configurable, secure, COTS and MOTS rack servers and workstations supporting third-party motherboards to maximize performance, interoperability, and scalability.

*Motherboards are TAA-compliant. mini-ITX, microATX, ATX, and eATX form factors with single/dual Intel Xeon® or Core® CPUs.

**Military- and industrial-grade solutions available.