• 1 - 6 GHz, 40dB Gain, 2.5dB N.F.
• Compensation long cable loss for EMI Measurement
• Improve system noise floor flatness
• High EMI performance
• High linearity LNA for EMI measurement
• High dynamic range
• Unconditionally Stable
• State-of-the-Art Technology

The EH1840 EMC horn combines stable gain performance and low VSWR with wide band frequency operation. The horn is single linearly polarized with excellent cross-polar discrimination. The unique horn design suppresses any possible excitation of higher order modes in the aperture and maintains a well-defined smooth radiation pattern in the direction of the boresight axis throughout the operational bandwidth.

An EMC Chamber with 5 meter test range ensuring EMC compliance testing for Emission and Immunity testing. Ferrite and hybrid pyramidal absorbers are combined in a unique pattern within a SmartShield high performance chamber. Operating at a 5m test distance, this EMC chamber is compliant to CISPR-16-1-4 / ANSI C63.4 with a measurement zone diameter of 2 to 4 meters.

See "Specifications & Details" tab for more information.

Our reverberation chamber is particularly suited for immunity testing for EMC measurement and special applications for very high-field strength applications (200V/m - 7000V/m). The paddle system ensures that the widest range of frequencies and particularly low frequency performance is maximized. This system meets testing requirements of the IEC61000-4-21 EMC testing specification.

The TBST line of shielded tents is designed to suppress interference from ambient noise when carrying out EMC pre-compliance measurements with sizes of 200 cm x 100 cm x 100 cm, 124 cm x 64 cm x 60 cm or 86 cm x 48 cm x 48 cm. The 200 cm and 124 cm tent can accommodate any Tekbox pre-compliance test equipment such as LISNs or TEM-cells. The 86 cm tent will fit the TBTC0/1/2 and all our LISN.

The ESD voltage meter MODEL: 18-00086B is a device that can measure the voltageholding time (holding voltage after 5 seconds) and output

specifications during the air discharge test in IEC 61000-4-2.The measured voltage is displayed on a 7-segment LED with peak and holding voltage values.

• Easily measure the Hold Time, the tester specification for air-discharge testing.
• Measure the output voltage from ±2kV to 30kV.
• Monitor the measured voltage waveform by connecting to an oscilloscope.
• Compact, lightweight and easy to carry.

ULTRA UH series polypropylene based hybrid electromagnetic EMC absorbers are the latest technology for EMC/RF test applications.

The polypropylene material has a highly uniform carbon density throughout the material, which provides for more predictable results with no discontinuities.

Its unique technology is a critical factor in achieving the highest electromagnetic reflectivity performance in an MVG EMC anechoic chamber.

The CISPR25 emc chamber is designed for emc compliance benchtop testing of automotive components and wiring harnesses . The MVG CISPR25 emc chamber is designed for the emc measurements using the requisite 1 m test distance and for a “typical bench” configuration of 2.5 m x 1.0 m. The unique design requires less volumetric space than traditional absorbers and still provides the volume required to have the requisite distances between the EUT and the walls and the emc absorber and the walls & ceiling. The chamber is designed with anechoic treatment that meets the specified attenuation in the CISPR 25 standard, and it is designed to meet the Long Wire testing specified in Annex J. The polypropylene emc absorber does not undergo the typical age-related deterioration of the typical “foam” polyurethane absorbers. The UH-series, polypropylene emc absorber is also applicable to the radar pulse testing required in some automotive test standards.