The PPE6KV-A and HVP120 can handle up to 6000 Vpeak transient overvoltages and are designed for probing up to 2000 Vrms and 1000 Vrms respectively. Fast rise times, excellent frequency response, and a variety of standard accessories make these probes safe and ideal for high voltage measurement applications

Up to 65 GHz  Up to 80 Channels @ 36 GHz  Up to 160 GS/s  Up to 512 Mpts/Ch  50 fs rms Sample Clock (Intrinsic) Jitter  Jitter Between All Channels of <130 fs rms

Static power analysis - like a dedicated power analyzer  Dynamic power analysis – capture more information  Complete test coverage – control system, power section, motor  Comprehensive mechanical interface  Harmonics calculation option  Vector display option (THREEPHASEVECTOR)  Waveform Transformations option (THREEPHASEdq0)  16 Channels with OscilloSYNC™

DigRF v4 Decodes  Low-speed (26 Mb/s)  Medium-speed (1248 Mb/s)  High-speed (1456 Mb/s)  DigRF v3 Decodes  Low-speed (6.5 Mb/s)  Medium-speed (26 Mb/s)  High-speed (312 Mb/s)  Convert DigRF 3G and v4 I and Q digital data to corresponding analog waveforms  Correlate analog waveforms with protocol decode on one screen  View decoded data in hexadecimal format  Decode information expands as the time base is adjusted or zoomed  Convenient table display with quick “Zoom to byte” capability  Quick search capability for specific message packets

Compact probe head Supports fine pitch SMD probing Rugged, Sharp tip HF optimized connection accessories Over 30 accessories

Probe adapters provide simple and easy interface of third-party probes as well as change between the different Teledyne LeCroy Oscilloscope input and cable types (ProBus, ProLink, K/2.92 mm, BNC and SMA). Depending on the adapters, changing between the Teledyne LeCroy Oscilloscope's input type may have an effect on the overall performance of the channel.

Provides a passive PCIe® backplane for test applications  Self-contained, portable and self-powered  Supplies power for +3.3V, +3.3Vaux and +12V rails  Generates PCIe reference clock  Accepts external clock inputs  Generates valid PERST# bus reset that can be activated by manual push button  Includes two mid-bus probe footprints for traffic monitoring  Supports two PCIe x16 sockets which accept cards of any link width (x1, x4, x8, x16)  Provides indication of valid connection of PRSNT1# and PRSNT2# lines for each card  Supports data rates of 2.5 GT/s and 5.0 GT/s

Available in 30MHz, 40MHz, 60MHz, 80MHz, 120MHz, 200MHz, 350MHz and 500MHz models All models feature 2 channels Max Sampling rate of 150 Msa/s (30MHz & 60 MHz) 1.2 Gsa/s (40MHz, 80MHz, 120MHz) and 2.4 Gsa/s (200MHz, 350MHz and 500MHz) models. Up to 16-bit vertical resolution (14-bit on 30MHz & 60MHz models). All models have 4.3" Touchscreens. Excellent analog and digital modulation types available (AM, DSB-AM, FM, PM, PSK, FSK, ASK and PWM)

150 MHz, 2 analog channels  8 synchronized digital channels (T3AWG2152-D only)  16-bit vertical resolution  128 MPts @Ch waveform memory  Max sampling rate of 600 MS/s

Available in 250 MHz and 350 MHz models 2, 4 and 8 channel modes 16-bit vertical resolution Max Sampling rate of 1.2 GS/s Max sinewave frequency of 250 MHz and 350 MHz respectively

2, 4 and 8 channel configurations  16-bit vertical resolution  Sample Rate up to 12,32 GS/s with RF mode  16-bit vertical resolution.  4 GSample waveform memory per channel  Up to 5 Vpp Output Voltage and ±2.5 V Baseline Offset (into 50?)

Four operating modes: – CC, CV, CR, CP Static, Dynamic and Sequence mode support Built in Application Functions - Short Circuit Test, Battery Test Mode, CR-LED Mode, OCP and OPP Test  Provides a load of up to 300 Watts Programmable and analog external control