SPA available from 70KHz to 20/40/70/110/125/145 and 220GHz. Also available for banded configuration to 1.1THz. Dual SPA mode available: suitable for Mixers/Amplifier/ Harmonics /Spurious testing. SPA available on all ports. User can define which port to use as SPA port. Several detection types available in classical mode: Peak, minimum, RMS, Mean. Various math functions can be applied on SPA mode like Min hold/max hold/ user defined equations. Sources and receivers can be independently configured. Can be used as Tracking Generator. For units that have a dual source, a dual drive option is available. Support for external source control also possible.

Guaranteed performance to 43.5 GHz with Extended K™ ports High output power allows measurement of high attenuation devices Advanced time domain option provides tools for signal integrity analysis Wide dynamic range enables measurement of very low reflection artifacts Excellent corrected directivity minimizes measurement uncertainty SmartCal™ auto calibration unit reduces calibration and setup time Time domain with time gating option grants easier and faster fault identification Modern LAN interface for remote control is faster than GPIB A common GUI and SCPI interface within the ShockLine family Bias tee option simplifies test setups where the DUT needs DC biasing

Specified performance to 43.5 GHz with Extended K™ ports Simple signal integrity testing of passive multiport and differential devices Advanced time domain option provides tools for signal integrity analysis Wide dynamic range enables measurement of very low reflection artifacts Excellent corrected directivity minimizes measurement uncertainty SmartCal™ auto calibration unit reduces calibration and setup time Time domain with time gating option enables TDR-like measurements Modern LAN interface for remote control is faster than GPIB A common GUI and SCPI interface within the ShockLine family The compact 3U high chassis allows for the efficient use of rack space

All-in-One Support for RF Measurements and Protocol Tests in FR1 (to 7.125 GHz) and FR2 (Millimeter Wave) Bands Supports mm-wave band RF measurements and beam forming tests combined use with the RF chamber. Flexible Platform using Modular Architecture Supports Existing LTE Test Environment Supports various functional tests by GUI operation only without requiring difficult scenario development Measures maximum IP data throughput for wide variety of band, CA, and MIMO combinations  Note: The design, explanation and appearance are subject to change without notice.

Supports all cellular technologies compliant with 3GPP/3GPP2 UE RF TRX tests including LTE/LTE-Advanced, Cat-M1/NB-IoT, NTN NB-IoT, W-CDMA/HSPA, GSM/EGPRS, TD-SCDMA/HSPA Support LTE-Advanced Downlink Carrier Aggregation 5CCs SISO tests in one unit Supports LTE-Advanced Downlink Carrier Aggregation 2CCs 4x4 MIMO and 4CCs 2x2 MIMO tests in one unit Supports LTE-Advanced Downlink Carrier Aggregation 4CCs 4x4 MIMO and 6CCs 2x2 MIMO tests in two units Supports LTE-Advanced Downlink Carrier Aggregation 5CCs 4x4 MIMO tests in three units Supports VoLTE voice/video echoback tests Supports up to 6 GHz 160 MHz wide frequency bandwidth (Generator/Analyzer) Next generation GUI with large touch panel

LMR Signal Analyzers with Coverage Mapping: P25, P25 Phase 2, DMR (MotoTRBO™), TETRA, NXDN, dPMR, PTC-ITCR, PTC-ACSES, NBFM, FDD & TDD LTE Broadband Signal Analyzers: LTE, WiMAX Interference Analyzer with Interference Mapping and support for MA2700A Handheld Interference Hunter Auto Test and Alignment of Motorola APX P25 mobiles and portables Direct measurement of up to 150 watt transmitters Spectrum Analyzer: 9 kHz – 1.6 GHz, optional to 6 GHz Cable and Antenna Analyzer: 500 kHz – 1.6 GHz, optional to 6 GHz Return Loss, VSWR, Insertion Loss, S11 / S21, DTF PIM Hunting Internal Power Meter, optional External Power Sensor Handheld, battery-operated design

PYTHON 480 CMOS sensor ALVIUM image processing MIPI CSI-2 interface Various hardware options

AR0135CS CMOS sensor ALVIUM image processing MIPI CSI-2 interface Various hardware options

AR0521 CMOS sensor ALVIUM image processing MIPI CSI-2 interface Various hardware options

AR0521 CMOS sensor ALVIUM image processing MIPI CSI-2 interface Various hardware options

IMX287 CMOS sensor ALVIUM image processing MIPI CSI-2 interface Various hardware options

IMX304 CMOS sensor ALVIUM image processing MIPI CSI-2 interface Various hardware options