• 9 kHz to 9/14/20/26.5/32/43.5/54 GHz
• DANL: -164 dBm (with preamp)
• TOI: +20 dBm (typical) Analysis bandwidth: 150 MHz
• Amp range: DANL to +30 dBm
• Phase noise at 1 GHz: -110 dBc/Hz @ 100 kHz offset (typical)
• Demodulation: 5GNR, LTE FDD/TDD, RF, and modulation quality plus SSB signal analysis
• Resolution bandwidth (RBW): 1 Hz to 10 MHz
• Sweep Speed: 40 GHz/second (full span)
• RTSA bandwidth: 22, 55, 120, 150 MHz (option dependent)
• Amplitude accuracy: < 14 GHz ± 1.3 dB (± 0.5 dB, typical)
• Zero span with 60 ns minimum span
• IQ capture and streaming
• AM/FM modulation quality measurements
• Built-in PDF/HTML report generation
• EMF Measurements
• Uplink/Downlink interference analysis
• Interference hunting
• Channel Scanner
• Coverage Mapping

• Guaranteed performance to 43.5 GHz with Extended K™ ports
• High output power allows measurement of high attenuation devices
• Wide dynamic range enables measurement of very low reflection artifacts
• Excellent corrected directivity minimizes measurement uncertainty
• SmartCal™ auto calibration unit reduces calibration and setup time
• Time domain with time gating option grants easier and faster fault identification
• Modern LAN interface for remote control is faster than GPIB
• A common GUI and SCPI interface within the ShockLine family
• Bias tee option simplifies test setups where the DUT needs DC biasing
• Universal Fixture Extraction (UFX) software option provides advanced de-embedding tools for test fixture extraction
• E-Band VNA
  • Extended frequency range covering E-band and major parts of V band
  • Fully assembled test system eliminates setup errors and increases reliability
  • Tethered modules connect directly to the DUT increasing measurement stability

• Supports all cellular technologies compliant with 3GPP/3GPP2 UE RF TRX tests including LTE/LTE-Advanced, Cat-M1/NB-IoT, NTN NB-IoT, W-CDMA/HSPA, GSM/EGPRS, TD-SCDMA/HSPA
• Support LTE-Advanced Downlink Carrier Aggregation 5CCs SISO tests in one unit
• Supports LTE-Advanced Downlink Carrier Aggregation 2CCs 4x4 MIMO and 4CCs 2x2 MIMO tests in one unit
• Supports LTE-Advanced Downlink Carrier Aggregation 4CCs 4x4 MIMO and 6CCs 2x2 MIMO tests in two units
• Supports LTE-Advanced Downlink Carrier Aggregation 5CCs 4x4 MIMO tests in three units
• Supports VoLTE voice/video echoback tests
• Supports up to 6 GHz
• 160 MHz wide frequency bandwidth (Generator/Analyzer)
• Next generation GUI with large touch panel
• Backwards compatibility with the MT8820 series

For next-generation broadband and multicarrier communication system, such as 5G mobile and broadcast satellites

• Built-in 5G measurement software supports efficient development and production
  • All-in-one 5G NR/V5G (sub-6 GHz/mmWave) coverage
  • High EVM performance due to wide dynamic range (EVM: <1%)
  • One-button dynamic-range optimization at EVM measurement
  • Multicarrier batch (all-at-once) analysis
  • Amplitude/phase/timing difference measurement for each carrier
• Maximum analysis bandwidth: 1 GHz
• Excellent amplitude and phase flatness performance
• Wide dynamic range measurement: >140 dB
• Long-term capture using large memory
• With PCIe/USB3.0 connector equipped
  • Transfers captured data to external PC at faster speed than 1000BASE-T

The VectorStar ME7838 Series broadband VNA offers the widest available single frequency sweep from 70 kHz to 110, (ME7838AX to 125), (ME7838EX to 125), to 145 GHz, and to 220 GHz with mmWave bands to 1.1 THz. 

• The ME7838AX or ME7838EX version can easily be upgraded to 145 GHz and to 220 GHz
• All versions may be configured to include banded millimeter-wave modules up to 1.1 THz
• Industry-best calibration and measurement stability: 0.1 dB vs 0.6 dB over 24 hrs.
• All versions support the 3744x-Rx receiver for noise figure measurements, including the ability to characterize differential noise figure, to 125 GHz
• Compact, lightweight mmWave modules (0.6 lb vs 7+ lbs and 1/50 the volume) offer low cost installation on smaller probe stations.

• First portable spectrum analyzer to provide continuous frequency coverage to 170 GHz
• Broadband mmWave capabilities for radio astronomy, automotive radar, wireless backhaul, 802.11ad, satcom, and more
• Ultraportable form factor enables measurements right at the device under test
• Measure: channel power, adjacent channel power, occupied bandwidth
• Patented NLTL technology provides > 100 dB dynamic range
• -141/-136/-129/-122 dBm DANL to 90/110/145/170 GHz ( Spectrum Master MS2762A)
• Up to 6 traces, 3 trace detectors, and 12 markers
• Standard three-year warranty

• LMR Signal Analyzers with Coverage Mapping: P25, P25 Phase 2, DMR (MotoTRBO™), TETRA, NXDN, dPMR, PTC-ITCR, PTC-ACSES, NBFM, FDD & TDD LTE
• Broadband Signal Analyzers: LTE, WiMAX
• Interference Analyzer with Interference Mapping and support for MA2700A Handheld Interference Hunter
• Auto Test and Alignment of Motorola APX P25 mobiles and portables
• Direct measurement of up to 150 watt transmitters
• Spectrum Analyzer: 9 kHz – 1.6 GHz, optional to 6 GHz
• Cable and Antenna Analyzer: 500 kHz – 1.6 GHz, optional to 6 GHz
• Return Loss, VSWR, Insertion Loss, S11 / S21, DTF
• PIM Hunting
• Internal Power Meter, optional External Power Sensor
• Handheld, battery-operated design
• Weighs less than 7.6 lb (including battery)
• Rugged, field-proven design using Anritsu's 9th generation hardware platform
• Daylight viewable color touchscreen display
• Superior Immunity to RF interference
• Remote control via Ethernet
• Standard three-year warranty (battery one-year warranty)

• Frequency Ranges: 9 kHz to 9 GHz, 13 GHz, and 20 GHz
• Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I, Emission Mask, Spurious Emissions, Field Strength
• 3G and 4G Measurement options for LTE (FDD & TDD), CDMA, W-CDMA, WiMAX, GSM, and TD-SCDMA
• Interference Analyzer: Spectrogram, Signal Strength, RSSI, Mapping
• Dynamic Range: > 106 dB in 1 Hz RBW @ 2.4 GHz
• DANL: –164 dBm in 1 Hz RBW @ 1 GHz preamp On
• Phase Noise: –112 dBc/Hz @ 10 kHz offset at 1 GHz
• 1 Hz to 10 MHz Resolution Bandwidth (RBW)
• Tracking Generator up to 20 GHz
• PIM Hunting
• PIM Alert (a downloadable easyTest™ script)
• Standard three-year warranty (battery one-year warranty)

• 1-port VNA with frequency options from 1 MHz to 8 GHz / 20 GHz / 43.5 GHz
• Guaranteed performance to 43.5 GHz with Extended-KTM ports
• PC control takes advantage of external computer processing power and functionality
• Small and lightweight package enables direct connection to the DUT
• No on-board data storage eliminates the need for data purging in secure applications
• All ShockLine VNAs share common software supporting GUI and program compatibility
• Time domain with time gating option enables easier and faster fault identification
• Simultaneous Sweep enabling users to operate multiple (up to four) MS46131A VNAs concurrently in independent software instances, unlocking true parallel measurement execution