Anritsu - MS2760A Spectrum Master Ultraportable Spectrum Analyzer
- First portable spectrum analyzer to provide continuous frequency coverage to 170 GHz
- Broadband mmWave capabilities for radio astronomy, automotive radar, wireless backhaul, 802.11ad, satcom, and more
- Ultraportable form factor enables measurements right at the device under test
- Measure: channel power, adjacent channel power, occupied bandwidth
- Patented NLTL technology provides > 100 dB dynamic range
- -141/-136/-129/-122 dBm DANL to 90/110/145/170 GHz ( Spectrum Master MS2762A)
- Up to 6 traces, 3 trace detectors, and 12 markers
- Standard three-year warranty
Ultra-portable. Ultra-broadband. The Spectrum Master™ MS276xA family of ultraportable spectrum analyzers is the first solution of its kind to provide continuous coverage to 170 GHz. This family now offers:
- The Spectrum Master MS2760A models: providing full broadband coverage from 9 kHz to 170 GHz with excellent dynamic range and DANL performance.
- The Spectrum Master MS2762A models: providing increased dynamic range and DANL performance than the Spectrum Master MS2760A models for the most demanding sensitivity requirements, these units frequency coverage range is from 6 GHz to 170 GHz.
The Spectrum Master MS2760A and MS2762A solutions deliver the best-in-class price/performance ratio unmatched by traditional benchtop instruments. The Spectrum Master™ MS276xA series are pocket-sized, yet big on performance with leading dynamic range, sweep speed, and amplitude accuracy. The ultraportable size of these instruments enables a direct connection to almost any DUT, eliminating the need for lossy, expensive cables. This enables you to more efficiently advance your technology development and reduce your time to market.
Utilizing Anritsu’s patented nonlinear transmission line (NLTL) technology – the same technology that Anritsu’s world-class vector network analyzers use – the 145 GHz and 170 GHz models are the world's first handheld, millimeter-wave spectrum analyzers to provide broadband, continuous coverage from 9 kHz to 170 GHz and break through the 110 GHz barrier. Having frequency coverage in to the higher bands enables research and development in the entire D band spectrum as well as advanced millimeter-wave applications like radio astronomy, automotive radar, antenna beam pattern testing, and more.
The Spectrum Master MS276xA family are all USB-powered and controlled from a Windows-based PC, laptop, or tablet, making them uniquely flexible for use in the lab, on the manufacturing floor, or even in the field.
Specifications
|
Model |
MS2760A |
MS2762A |
|---|---|---|
|
Frequency Range |
MS2760A-0032 9 kHz – 32 GHz MS2760A-0044 9 kHz – 44 GHz MS2760A-0050 9 kHz – 50 GHz MS2760A-0070 9 kHz – 70 GHz MS2760A-0090 9 kHz – 90 GHz MS2760A-0100 9 kHz – 110 GHz MS2760A-0145 9 kHz – 145 GHz MS2760A-0170 9 kHz – 170 GHz |
MS2762A-0032 6 GHz – 32 GHz MS2762A-0044 6 GHz – 44 GHz MS2762A-0050 6 GHz – 50 GHz MS2762A-0070 6 GHz – 70 GHz MS2762A-0090 6 GHz – 90 GHz MS2762A-0100 6 GHz – 110 GHz MS2762A-0145 6 GHz – 145 GHz MS2762A-0170 6 GHz – 170 GHz |
|
Dynamic Range 2/3 (TOI to DANL) 1 Hz RBW |
>103 dB @ 70 GHz |
>108 dB @ 70 GHz |
|
DANL (RMS detection) 1 Hz RBW, IF Gain = On |
-130 dB typ (70 – 90 GHz) -120 dB typ (110 – 145 GHz) |
-141 dB typ (70 – 90 GHz) -129 dB typ (110 – 145 GHz) |
|
RF Connector *K = 2.92 mm (compatible with SMA and 3.5 mm) *V = 1.85 mm (compatible with 2.4 mm) *W1 = 1.0 mm |
MS2760A-0032 K* (m) connector MS2760A-0044 K* (m) connector MS2760A-0050 V* (m) connector MS2760A-0070 V* (m) connector MS2760A-0090 W1* (m) connector MS2760A-0100 W1* (m) connector MS2760A-0145 0.8 mm (m) connector MS2760A-0170 0.8 mm (m) connector |
MS2762A-0032 K* (m) connector MS2762A-0044 K* (m) connector MS2762A-0050 V* (m) connector MS2762A-0070 V* (m) connector MS2762A-0090 W1* (m) connector MS2762A-0100 W1* (m) connector MS2762A-0145 0.8 mm (m) connector MS2762A-0170 0.8 mm (m) connector |
|
Amplitude Accuracy |
±0.5 dB, typical (20°C to 30°C) |
±0.5 dB, typical (20°C to 30°C) |
|
Frequency Accuracy |
Accuracy: ± 0.2 ppm (25°C ± 25°C) + aging Aging: ± 1.0 ppm per year |
Accuracy: ± 0.2 ppm (25°C ± 25°C) + aging Aging: ± 1.0 ppm per year |
Available Models
|
Models |
Description |
|---|---|
|
MS2760A-0032 |
9 kHz to 32 GHz Spectrum Master, ultraportable spectrum analyzer |
|
MS2760A-0044 |
9 kHz to 44 GHz Spectrum Master, ultraportable spectrum analyzer |
|
MS2760A-0050 |
9 kHz to 50 GHz Spectrum Master, ultraportable spectrum analyzer |
|
MS2760A-0070 |
9 kHz to 70 GHz Spectrum Master, ultraportable spectrum analyzer |
|
MS2760A-0090 |
9 kHz to 90 GHz Spectrum Master, ultraportable spectrum analyzer |
|
MS2760A-0110 |
9 kHz to 110 GHz Spectrum Master, ultraportable spectrum analyzer |
|
MS2760A-0145 |
9 kHz to 145 GHz Spectrum Master, ultraportable spectrum analyzer |
|
MS2760A-0170 |
9 kHz to 170 GHz Spectrum Master, ultraportable spectrum analyzer |
|
MS2762A-0032 |
6 GHz to 32 GHz Spectrum Master, ultraportable spectrum analyzer |
|
MS2762A-0044 |
6 GHz to 44 GHz Spectrum Master, ultraportable spectrum analyzer |
|
MS2762A-0050 |
6 GHz to 50 GHz Spectrum Master, ultraportable spectrum analyzer |
|
MS2762A-0070 |
6 GHz to 70 GHz Spectrum Master, ultraportable spectrum analyzer |
|
MS2762A-0090 |
6 GHz to 90 GHz Spectrum Master, ultraportable spectrum analyzer |
|
MS2762A-0110 |
6 GHz to 110 GHz Spectrum Master, ultraportable spectrum analyzer |
|
MS2762A-0145 |
6 GHz to 145 GHz Spectrum Master, ultraportable spectrum analyzer |
|
MS2762A-0170 |
6 GHz to 170 GHz Spectrum Master, ultraportable spectrum analyzer |
Calibration Options
|
Options |
Description |
|---|---|
|
MS276xA-0097 |
Accredited Calibration to ISO17025 and ANSI/NCSL Z540-1, includes calibration certificate, test report, and uncertainty data |
|
MS276xA-0098 |
Standard Calibration to ISO17025 and ANSI/NCSL Z540-1, includes calibration certificate |
|
MS276xA-0099 |
Premium Calibration to ISO17025 and ANSI/NCSL Z540-1, includes calibration certificate, test report, and uncertainty data |
Adapters
|
Model Number |
Description |
|---|---|
|
1091-456-R |
Adapter, 49.9 to 67.0 GHz, WR15 to V(f) |
|
1091-457-R |
Adapter, 39.3 to 59.7 GHz, WR19 to V(f) |
|
1091-458-R |
Adapter, 33.0 to 50.1 GHz, WR22 to V(f) |
|
1091-459-R |
Adapter, 26.4 to 40.1 GHz, WR28 to V(f) |
|
1091-460-R |
Adapter, 17.6 to 26.7 GHz, WR42 to V(f) |
Inline Adapters
|
Model Number |
Description |
|---|---|
|
1091-402-R |
Inline Adapter, W1 (f) to WR15, 50 to 75 GHz |
|
1091-401-R |
Inline Adapter, W1 (f) to WR12, 60 to 90 GHz |
|
1091-400-R |
Inline Adapter, W1 (f) to WR10, 75 to 110 GHz |
|
2000-1889-R |
Inline Adapter, K (f) to WR42, 17.6 to 26.7 GHz |
|
2000-1890-R |
Inline Adapter, K (f) to WR28, 26.4 to 40.1 GHz |
|
2000-1880-R |
Coaxial Adapter, V (f) to N (m), DC to 18 GHz, 50 Ω |
|
2000-1881-R |
Coaxial Adapter, V (f) to N (f), DC to 18 GHz, 50 Ω |
Cables and Extenders
|
Model Number |
Description |
|---|---|
|
2000-1605-R |
BNC(m) - MCX(m) Cable, 1.5 meters |
|
2000-1859-R |
USB 3.0 Type C to Type A Cable, 1m |
|
2000-1888-R |
USB 3.0 Extender Cable, 10m |
|
2000-1918-R |
200m USB multimode fiber extender |
Directional Horn Antennas
|
Model Number |
Description |
|---|---|
|
2000-1867-R |
17.6 to 26.7 GHz, WR42, 25 dBi gain |
|
2000-1868-R |
26.4 to 40.1 GHz, WR28, 25 dBi gain |
|
2000-1869-R |
33.0 to 50.1 GHz, WR22, 25 dBi gain |
|
2000-1870-R |
39.3 to 59.7 GHz, WR19, 25 dBi gain |
|
2000-1871-R |
49.9 to 75.8 GHz, WR15, 25 dBi gain |
|
2000-1872-R |
60.0 to 90.0 GHz, WR12, 25 dBi gain |
|
2000-1873-R |
75.0 to 110.0 GHz, WR10, 25 dBi gain |
Low Noise Amplifiers
These low noise amplifiers (LNAs) are specially designed to supplement the performance of the MS276xA ultraportable spectrum analyzers. With approximately 28 dB of gain, these LNAs will improve sensitivity by approximately 20-22 dBm in the frequency range from 18 to 42 GHz.
|
Model Number |
Description |
|---|---|
|
2000-1929-R
Fits models MS276xA-0050 MS276xA-0070 |
Frequency Range: 18 - 42 GHz Gain: 28 dB Noise Figure: 4 dB RF Connector: V(m) – V(f) output Max RF input level: -5 dBm, (0 dBm damage level) Specification temperature: +25°C |
|
2000-1930-R
Fits models MS276xA-0032 MS276xA-0044 |
Frequency Range: 18 - 42 GHz Gain: 28 dB Noise Figure: 4 dB RF Connector: K(m) – K(f) output Max RF input level: -5 dBm, (0 dBm damage level) Specification temperature: +25°C |
|
2000-1933-R |
USB power bank (for use with the MS276xA Low Noise Amplifier accessory) |
More Product Information
- Provides ±0.3 dB (typ.) total level accuracy
- 9 kHz to 3.6 GHz/6 GHz/13.5 GHz/26.5 GHz/43 GHz frequency range
- Various options can be installed
- Spectrum analyzer supporting built-in signal analyzer with FFT technology, vector signal generator, analog signal generator and audio analyzer (options)
- Offers modulation analysis, such as LTE, W-CDMA, WLAN, Vector Modulation and Analog Modulation (with optional software)
- Excellent eco-friendly product with low power consumption of 110 VA min.
- Supports all cellular technologies compliant with 3GPP/3GPP2 UE RF TRX tests including LTE/LTE-Advanced, Cat-M1/NB-IoT, NTN NB-IoT, W-CDMA/HSPA, GSM/EGPRS, TD-SCDMA/HSPA
- Support LTE-Advanced Downlink Carrier Aggregation 5CCs SISO tests in one unit
- Supports LTE-Advanced Downlink Carrier Aggregation 2CCs 4x4 MIMO and 4CCs 2x2 MIMO tests in one unit
- Supports LTE-Advanced Downlink Carrier Aggregation 4CCs 4x4 MIMO and 6CCs 2x2 MIMO tests in two units
- Supports LTE-Advanced Downlink Carrier Aggregation 5CCs 4x4 MIMO tests in three units
- Supports VoLTE voice/video echoback tests
- Supports up to 6 GHz
- 160 MHz wide frequency bandwidth (Generator/Analyzer)
- Next generation GUI with large touch panel
- Backwards compatibility with the MT8820 series
VNA Master (500 kHz to 6 GHz)
- 2-port, 1-path Vector Network Analyzer (VNA)
- Intuitive Graphical User Interface (GUI) with convenient Touch Screen
- Exceptional RF immunity
- 100 dB Transmission Dynamic Range
- Vector Voltmeter option, ideal for cable phase matching
+Spectrum Analyzer (9 kHz to 6GHz)
- Dynamic Range: > 95 dB in 10 Hz RBW
- DANL: –162 dBm (1 Hz)
- Phase Noise: –100 dBc/Hz max @ 10 kHz offset at 1 GHz
- Frequency Accuracy: < ±50 ppb with GPS On
- Detectors: Peak, Negative, Sample, Quasi-peak, and true RMS
- PIM Hunting
- Standard three-year warranty (battery one-year warranty)
VNA Master (500 kHz to 4 GHz)
- 2-port, 1-path Vector Network Analyzer (VNA) Intuitive Graphical User Interface (GUI) with resistive TFT Touch Screen
- Exceptional RF immunity
- 100 dB Transmission Dynamic Range Vector
- Voltmeter option, ideal for cable phase matching
+Spectrum Analyzer (9 kHz to 4 GHz)
- Dynamic Range: > 95 dB in 10 Hz RBW
- DANL: –162 dBm (1 Hz)
- Phase Noise: –100 dBc/Hz max @ 10 kHz offset at 1 GHz
- Frequency Accuracy: < ±50 ppb with GPS On
- Detectors: Peak, Negative, Sample, Quasi-peak, and true RMS
- PIM Hunting
- Standard three-year warranty (battery one-year warranty)
- SPA available from 70KHz to 20/40/70/110/125/145 and 220GHz. Also available for banded configuration to 1.1THz.
- Dual SPA mode available: suitable for Mixers/Amplifier/ Harmonics /Spurious testing.
- SPA available on all ports. User can define which port to use as SPA port.
- Several detection types available in classical mode: Peak, minimum, RMS, Mean.
- Various math functions can be applied on SPA mode like Min hold/max hold/ user defined equations.
- Sources and receivers can be independently configured. Can be used as Tracking Generator.
- For units that have a dual source, a dual drive option is available. Support for external source control also possible.
- Phase synchronization for units with Dual source available. This feature allows users to control and configure the phase between the two sources.
- Source and receiver attenuator available with VNA can be activated in SPA mode. Recommendation to use option 62 (with attenuator on receiver side) for measuring the spectrum content of high-power devices.
- Software option: easy to install and upgrade existing user equipment.
The VectorStar ME7838 Series broadband VNA offers the widest available single frequency sweep from 70 kHz to 110, (ME7838AX to 125), (ME7838EX to 125), to 145 GHz, and to 220 GHz with mmWave bands to 1.1 THz.
- The ME7838AX or ME7838EX version can easily be upgraded to 145 GHz and to 220 GHz
- All versions may be configured to include banded millimeter-wave modules up to 1.1 THz
- Industry-best calibration and measurement stability: 0.1 dB vs 0.6 dB over 24 hrs.
- All versions support the 3744x-Rx receiver for noise figure measurements, including the ability to characterize differential noise figure, to 125 GHz
- Compact, lightweight mmWave modules (0.6 lb vs 7+ lbs and 1/50 the volume) offer low cost installation on smaller probe stations.
- 9 kHz to 9/14/20/26.5/32/43.5/54 GHz
- DANL: -164 dBm (with preamp)
- TOI: +20 dBm (typical) Analysis bandwidth: 150 MHz
- Amp range: DANL to +30 dBm
- Phase noise at 1 GHz: -110 dBc/Hz @ 100 kHz offset (typical)
- Demodulation: 5GNR, LTE FDD/TDD, RF, and modulation quality plus SSB signal analysis
- Resolution bandwidth (RBW): 1 Hz to 10 MHz
- Sweep Speed: 40 GHz/second (full span)
- RTSA bandwidth: 22, 55, 120, 150 MHz (option dependent)
- Amplitude accuracy: < 14 GHz ± 1.3 dB (± 0.5 dB, typical)
- Zero span with 60 ns minimum span
- IQ capture and streaming
- AM/FM modulation quality measurements
- Built-in PDF/HTML report generation
- EMF Measurements
- Uplink/Downlink interference analysis
- Interference hunting
- Channel Scanner
- Coverage Mapping
- Specified performance to 43.5 GHz with Extended K™ ports
- Simple signal integrity testing of passive multiport and differential devices
- Advanced time domain option provides tools for signal integrity analysis
- Wide dynamic range enables measurement of very low reflection artifacts
- Excellent corrected directivity minimizes measurement uncertainty
- SmartCal™ auto calibration unit reduces calibration and setup time
- Time domain with time gating option enables TDR-like measurements
- Modern LAN interface for remote control is faster than GPIB
- A common GUI and SCPI interface within the ShockLine family
- The compact 3U high chassis allows for the efficient use of rack space
- Bias tee option simplifies test setups where the DUT needs DC biasing
- Universal Fixture Extraction (UFX) software option provides advanced de-embedding tools for test fixture extraction
All-in-One BERT and Sampling Oscilloscope
- Customized built-in 4ch sampling oscilloscope and 4ch BERT
- Fast measurement and high performance shorten test times, improve yields, and cut capital infrastructure costs
- Sampling Oscilloscope
- Fast: 250 ksamples/s to measure 1 Msamples in about 5 s
- High Sensitivity: –15 dBm (typ., SMF)
- Wide bandwidth: 35 GHz (optical, SMF), 25 GHz (optical, MMF), 40 GHz (electrical)
- Low Jitter: 200 fs rms (typ.)
- Both NRZ and PAM4 signal analysis, Supports 53-Gbaud analysis with PAM4
- Built-in 26/53 Gbaud Clock Recovery Unit (CRU) for both NRZ and PAM4
- NRZ Jitter component analysis
- BERT
- Low-Jitter PPG: 600 fs rms (typ.)
- High-sensitivity ED: 25 mV (typ.)
- Sampling Oscilloscope
- Built-in PC for stable fast performance
Anritsu
Since its founding in 1895, Anritsu has been a pioneer in the telecommunications field, marking its 120 years of growth with achievements that include creating the world’ s first practical wireless telephone, which paved the way for today’s smartphones. We would like to express our sincere gratitude to our customers and everyone else who has made this possible.
With its measurement business as the pillar supporting the further advancement of its mobile broadband services, Anritsu offers solutions that are indispensable for building a safer and more secure society in a broad range of fields including quality assurance inspection equipment for foods and pharmaceutical products, remote monitoring and control systems, traffic shapers, and high-speed electronic devices.
Contact Details
US Headquarters Anritsu Corporation
490 Jarvis Drive, Morgan Hill, CA 95037-2809
Phone (Toll-free/All locations): 1-800-Anritsu (1-800-267-4878) for Sales, Technical and Service
Test & Measurement
Download Line Card
