VIAVI - RGS-2000NG NextGen TCAS Test Set
-
Software-driven design allows for field updates for adding new features, capability or modifications due to industry changes
-
TCAS and ADS-B Target Generator
-
Simulates 32 dynamic/400 static intruders
-
ADS-B squitter encode/decode
-
More test capability than any tester in the market, all packed into one box
-
Pulse and frequency measurement Transponder test option for Modes A, C, S
-
Optional Command set emulation for SDX-2000, ATC-1400A and S-1403DL
-
10.4 inch touch screen LCD display for operator control of all test set capabilities or can be remotely controlled via GPIB or Ethernet
-
Four port antenna simulation
-
Hybrid surveillance
-
Six independent transmitters and two receivers
-
Data parsing for analysis
The RGS-2000NG TCAS Test Set is an RF signal generator/receiver for testing TCAS (Traffic Alert and Collision Avoidance System) with an option available for testing transponder LRUs. The RGS-2000NG was designed with modern software-driven digital modulation technology and is the RGS-2000 replacement for engineering development, design validation, manufacturing and return-to-service testing.
Equipment Tested
- TCAS computers
- ADS-B In Receivers
- ADS-B In Ground Station Receivers
- ADS-R, TIS-B Ground Station Transmitters
- Transponders Mode S/ADS-B Out (transponder option)
Technical Specs
Applications
- Engineering development, certification, manufacturing and service
- Capable of performing most MOPS tests for DO-185A, DO-185B, DO-260, DO260A, DO-260B, DO-181E and DO-300 Benefits
- Replacement for the RGS-2000
- Modern architecture design will support NextGen mandates and future standards changes Equipment Tested
- TCAS computers
- ADS-B In Receivers
- ADS-B In Ground Station Receivers
- ADS-R, TIS-B Ground Station Transmitters
- Transponders Mode S/ADS-B Out (transponder option)
Size
- 10.5”H x 19”W x 24”D (26.7 cm x 48.3 cm x 60.9 cm)
- Weight: 43 lbs. (19.5 kg)
Document
Document
Document
More Product Information
-
Operates up to and including 16GTps, PCIe 4.0 data rates
-
One Pod supports link widths of up to 4-lanes. Multiple pods can expand link widths up to 16-lanes.
-
Downward compatible with PCIe 1.0 to 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
Eight differential probe cables support simultaneous upstream and downstream capture
-
Supplied with two high-quality SFF-8674 equivalent custom cables for Analyzer attachment
-
Data path uses high-sensitivity amplifiers to ensure good signal capture with little or no tuning
-
Supports Analyzer side-band signal triggering and capture
-
Interposer power is independent of host system.
-
Power supply, 120/220 input, 12V/3A output
-
LEDs provide quick indication of power and status
-
Size: 170 x 107 x 34 mm (6.7 x 4.2 x 1.3 in)
-
Works together with multiple VIAVI Xgig PCIe Analyzer chassis types
-
Provides consistent, repeatable capture of link training, equalization negotiation and other data
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
-
Supports link widths up to and including 8-lanes
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe gen-1, gen-2 and gen-3 data rates of 2.5, 5.0 and 8.0GTps
-
A top edge 16-lane CEM slot connector accepts all endpoint DUT adapter cards
-
Bottom edge 8-lane PCB finger connector installs into host test system’s 4-, 8- or 16-lane PCIe slot
-
Supplied with four, high-quality SFF-8674 equivalent custom cables for Analyzer attachment
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Supports clock and trigger I/O
-
Interposer power is independent of host system.
-
Power supply, 120/220 AC in, 12V/3A DC out converter is included
-
Custom, exchangeable brackets enable secure chassis and endpoint card installations
-
LEDs give quick indication of power and operation
-
Format: Design is based on the PCIe Card Electro-Mechanical (CEM) specification
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
-
Reliable FAR Part 43 Appendix ‘F’ ERP and MTL testing in high multi-path environments
-
Provides >20 dB of antenna isolation for Mode S transponder altitude and diversity tests
-
Reduces interference with air traffic control and nearby aircraft
-
Rugged design for ramp use
-
Fits most ‘Shark Fin’ L-Band antennas
-
Quick action antenna grip/release action
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe 1.0, 2.0 and 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
Supports links of up to and including 4-lanes
-
NVMe SSD DUT (not supplied) plugs directly into the Interposer
-
Supplied with two high-performance custom cables for Analyzer attachment
-
Data path uses high-speed linear redrivers to ensure good signal capture with little or no tuning
-
Supports Analyzer side-band signal capture and triggering
-
Provides two differential clock connectors
-
Interposer power is independent of host system
-
A 120/220 AC in, 12V/3A DC output converter is included
-
LEDs give quick indicators of power and status
-
Format: Design based on 4-lane PCIe CEM specification
-
Supported by VIAVI Analyzer tools for trace capture with filter, trigger and more
-
Provides consistent, repeatable capture of link training, negotiation and other data
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
-
Operates up to 32GT/s, PCIe 5.0 data rates
-
Downward compatible with PCIe Gen-1, Gen-2, Gen-3 and Gen-4 data rates of 2.5, 5.0, 8.0 and 16.0GT/s
-
Supports PCIe links of up to 4-lanes
-
M.2 PCIe SSD DUT plugs directly into the Interposer
-
Supports M.2 card types 2230, 2242, 2260, 2280 and 22110
-
Custom cable with PCB connects to host system DUT
-
Data path uses high-speed linear redrivers to ensure good signal capture with little or no tuning
-
Supplied with two high-quality SFF-8764 equivalent custom cables for Analyzer attachment
-
Supports Analyzer side-band signal capture and triggering
-
Interposer power is independent of host system
-
A 120/220 AC in, 12V/3A DC output converter is included
-
Integrates seamlessly with the Xgig software tools suite, including Expert™, for problem and performance analysis
-
Supports link widths up to 16-lanes
-
Operates up to 32GTps, PCIe 5.0 data rates
-
Downward compatible with PCIe 1.0, 2.0, 3.0 and 4.0, and data rates of 2.5, 5.0, 8.0 and 16GTps
-
A top edge 16-lane CEM slot connector accepts all endpoint DUT adapter cards
-
Bottom edge 16-lane PCB finger connector installs into host test system’s 16-lane PCIe slot
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning effort
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Interposer power is independent of host system. A 120/220 AC in, 12V/3A DC out converter is included
-
Custom, exchangeable brackets enable secure chassis and endpoint card installations
-
LEDs give quick indication of power and operation
-
Format: Design is based on the 16-lane Card Electro-Mechanical (CEM) specification
-
Size: 230mm deep x 185mm tall x 15mm thick
Unlike other testers, the ALT-8000 tests from the antenna to the indicator in the cockpit, allowing the operator to replicate in-flight conditions and isolate a bad component of the installed system.
-
Tests FMCW radio altimeters including CDF types
-
Tests pulse radio altimeters (non-pulse compression types)
-
Direct-connect to UUT T/R or to installed system via antenna couplers
-
Full RF loop test allows TX, RX, Antenna or Feeder faults to be identified
-
Multi-channel operation (via additional test sets)
-
Programmable multi-leg climb/descend profiles
-
Large touch-screen display with simple user interface
-
Remote control interface USB/LAN
-
Lightweight and compact about 10 lbs. (4.5 kg)
-
Battery 4 hours plus duration
-
GPS signals simulated: L1, L1C*, L2C*, L5*
-
Galileo signals simulated: E1, E5**, E5a**, E5b**
-
Simultaneous GPS/Galileo simulation
-
WAAS/EGNOS SBAS simulation
-
Static and dynamic simulations via NMEA-0183 File Record and Playback
-
12 channel configuration available with upgrade path (RAIM supported)
-
Programmable space vehicle (SV) parametrics and health
-
User or built-in GPS receiver referenced time and date
-
PVT data available via RS-232
-
User Defined Data Transferable between Linked GPSG units
-
Remote control interface Ethernet
* For tracking of L1C, L2C or L5 signals some receivers require synchronized L1 transmissions.
** For tracking of E5 signals some receivers require synchronized E1 transmissions.
** For tracking of E5 signals some receivers require synchronized E1 transmissions.
Medusa Labs Test Tools Suite is leading application-based data testing and signal integrity testing tool enabling developers to identify, locate, and resolve elusive errors through stress testing before products are released to market.
-
Provides precise storage I/O and TCP or UDP generation with full traffic flexibility and control
-
Accelerates Xgig® root-cause analysis through automatic triggering and advanced tracking of anomalies and errors
-
Enables auto-discovery of devices and automation of all remote testing and validation processes across complex network topologies
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Contact Details
VIAVI Solutions Inc. Corporate Headquarters
6001 America Center Drive, 6th Floor, San Jose, CA 95002, USA
Phone: +1-408-404-3600
Fax: +1-408-404-4500
Test & Measurement
Download Line Card
Document
Embedded
Download Line Card
Document
