Teledyne DALSA - Iris High Resolution, Large FOV Imaging
The Iris Family of sCMOS cameras are designed to provide high resolution imaging even at low magnifications, across up to 25 mm fields of view. Small 4.25 µm pixels across a large array allow for the capture of highly detailed images across a wide area, resulting in a high-throughput solution without sacrificing image quality. Ideal for light-sheet microscopy, or when needing to image large samples at high resolutions.
High Resolution
The small, 4.25 µm pixels provide highly detailed images across the imaging plane, which allows for the highest resolution when using lower magnification objectives.
Large Field of View
The larger format 25 mm sensor of the Iris 15 is designed to increase throughput, maximize the amount of data captured and take full advantage of new, larger field of view microscopes.
Compact Form Factor
The Iris 9 (76 x 76 x 88 mm) and Iris 15 (78 x 78 x 108 mm) cameras feature optimized cooling for the size, ideal for integration into new or existing configurations.
Advanced Triggering
Programmable Scan Mode provides increased control over the rolling shutter exposure and read-out functionality of CMOS sensors by providing access to the sensor timing settings to allow optimization around applications that require control over the line time.
Superior Background Quality
The Iris Family feature Pattern Noise Reduction Technology and Correlated Noise Reduction Technology to ensure that they deliver clean, pattern-free images with minimal pixel defects, delivering improved image quality in low light conditions.
Family Specifications
|
Sensor Technology |
sCMOS |
|---|---|
|
Quantum Efficiency |
73% |
|
Pixel Size |
4.25 x 4.25 µm |
|
Field of View |
Up to 25 mm |
|
Supported Interfaces |
PCIe or USB 3.0 Options |
|
Spectrum Capabilities |
UV (200-440 nm), Visible (400-700 nm), Near Infrared (700-1000 nm) |
|
Read Noise (Median) |
1.5 e- |
Models
|
Model Number |
MP |
FOV (Diag. mm) |
Pixel Size (μm) |
Sensor |
Sensor Diag. |
Spectrum |
|---|---|---|---|---|---|---|
|
14.9 |
21.5.6 x 12.6 mm |
4.25 µm |
GPixel Gsense 5130 |
25 mm |
200 - 1100 nm |
|
|
14.9 |
21.5 x 12.6 mm |
4.25 µm |
GPixel Gsense 5130 |
25 mm |
200 - 1100 nm |
|
|
8.7 |
12.6 x 12.6 mm |
4.25 µm |
GPixel Gsense 5130 |
17.8 mm |
200 - 1100 nm |
|
|
8.7 |
12.6 x 12.6 mm |
4.25 µm |
GPixel Gsense 5130 |
17.8 mm |
200 - 1100 nm |
Document
Document
More Product Information
- Compact and Lightweight - The Dragonfly S camera has a compact form factor and lightweight design, making it ideal for embedded or handheld devices with space constraints. The fully enclosed models are Class B EMC safety compliant, restricting electromagnetic interference in your application.
- Flexible Camera Configurations - The Dragonfly S is available in multiple configurations to suit a wide variety of applications, from board-level to fully enclosed in a lightweight aluminum case. The USB connector is available in back or side orientation, and its locking mechanism provides a secure connection. These features provide maximum flexibility and durability, allowing seamless integration into any setup.
- Reliable Image Delivery - The Dragonfly S camera comes equipped with a large onboard memory that ensures every captured image frame is transferred to the host without any loss, in a single or multi-camera setup
-
Versatile temperature range for extreme environments
-
IEEE 1588 PTP
-
Power over Ethernet
-
P-Iris and DC-Iris lens control
-
Near-Infrared (GT2000NIR) model
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Versatile temperature range for extreme environments
-
IEEE 1588 PTP
-
Power over Ethernet
-
P-Iris and DC-Iris lens control
-
Monochrome (GT1920) and color (GT1920C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel column masking feature with the Load Defect Tables tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.
The new Light Hub for Zebra Iris GTX Smart Cameras (HCS-150-ZEB) streamlines machine vision system setup. This innovative controller acts as a central hub, directly powering your Zebra Iris GTX Smart Camera while managing triggering and analog dimming control between the camera, compatible lights, and I/O accessories.
Equipped with Advanced Illumination’s SignaTech™ technology, the Light Hub delivers 4 amps of continuous output and up to 8 amps of overdrive strobe. This empowers you to choose from a vast array of Advanced Illumination lighting configurations, ensuring optimal illumination for your application. Whether you need seamless integration with an 3×3 infrared backlight or would like to overdrive strobe a 70″ high intensity bar light, the Light Hub delivers.
- >95% quantum efficiency
- 10 μm pixel size
- 1 megapixel image array EMCCD
- eXcelon™3 technology
- Ultra-high-speed readout and spectra-kinetics
-
Versatile temperature range for extreme environments
-
IEEE 1588 PTP
-
Power over Ethernet
-
P-Iris and DC-Iris lens control
-
Near-Infrared (GT2050NIR) model
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-5e or CAT-6)
-
Trigger over Ethernet (ToE) Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba SDK and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Monochrome (G-131B) and color (G-131C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
The Iris Family of sCMOS cameras are designed to provide high resolution imaging even at low magnifications, across up to 25 mm fields of view. Small 4.25 µm pixels across a large array allow for the capture of highly detailed images across a wide area, resulting in a high-throughput solution without sacrificing image quality. Ideal for light-sheet microscopy, or when needing to image large samples at high resolutions.
Teledyne DALSA
Teledyne DALSA is an international leader in high performance digital imaging and semiconductors with approximately 1000 employees world-wide. Established in 1980 and acquired by Teledyne Technologies in 2011, Teledyne DALSA designs, develops, manufactures, and markets digital imaging products and solutions, in addition to providing semiconductor products and services. Our core competencies are in specialized integrated circuit and electronics technology, software, and highly engineered semiconductor wafer processing.
Teledyne DALSA exists for the long term. Our goal is to build upon our 30 year heritage of developing the world's leading high performance digital imaging and semiconductor solutions and to accelerate our level of innovation. We focus on R&D development but also draw on the capabilities available to us as part of a larger organization. We seek to deliver products and technology that are truly innovative so that we can help our customers succeed.
Contact Details
Teledyne DALSA Headquarters
605 McMurray Road, Waterloo, Ontario, Canada N2V 2E9
Phone: 519-886-6000
Fax: 519-886-8023
Imaging/Machine Vision
Download Line Card
