-
Our White High Intensity Linear Backlights offer 540 kLux output, perfect for back-lit, line-scanning applications.
-
Available in pre-engineered sizes from 6” (152mm) to 96” (2438mm) in 6″ increments.
-
A 3″ (75mm) length option is also available. Available intensity control provides illuminance adjustability for every 6″ increment via a 0 – 10v input.
-
Available in white only. For additional wavelengths please refer to our BL138 series.
Advanced Illumination - HCS-150-ZEB Light Hub for Zebra Iris GTX Smart Cameras
The new Light Hub for Zebra Iris GTX Smart Cameras (HCS-150-ZEB) streamlines machine vision system setup. This innovative controller acts as a central hub, directly powering your Zebra Iris GTX Smart Camera while managing triggering and analog dimming control between the camera, compatible lights, and I/O accessories.
Equipped with Advanced Illumination’s SignaTech™ technology, the Light Hub delivers 4 amps of continuous output and up to 8 amps of overdrive strobe. This empowers you to choose from a vast array of Advanced Illumination lighting configurations, ensuring optimal illumination for your application. Whether you need seamless integration with an 3×3 infrared backlight or would like to overdrive strobe a 70″ high intensity bar light, the Light Hub delivers.
General Specs
|
Controller Style |
HCS: Hybrid Control System (External, Detachable, GUI Disabled) |
|---|---|
|
User Interface |
Hardware Inputs (NPN and PNP Trigger, Analog) |
|
Operating Modes |
Pulse (Overdrive Strobe), Gated Continuous, Continuous |
|
Light Head Connection |
Via B-coded 5-pin Male M12 with Embedded EEPROM (SignaTechTM) on Light Head Cable (C1) |
|
Camera Connection |
HCS-150-ZEB, Via 12-pin Male M12 |
|
Input Supply Requirements |
24 V DC Nominal, 4.5 A Recommended 24 V Min - 30 V Max; Power Inputs Reverse-Polarity Protected |
|
Output Channels |
Number of Light Outputs: 1 Number of Channels per Output: 1 |
|
Output Power |
Continuous: 100W Max* Pulsed: 240W Peak* |
|
Output Current |
Continuous: 50 mA to 4 A Pulsed: 8 A Max* |
|
Output Voltage |
Vin - 1.5V |
|
Trigger Signal |
5 V Min to 30 V Max, <=5 mA, NPN or PNP Inputs |
|
Trigger Protection |
30 V Voltage Clamp and Reverse Polarity Protection |
|
Trigger Delay |
20 μs + 10 μs LED Rise-time |
|
Trigger Frequency Limit |
2 KHz |
|
Pulse Width Range |
30 μs – 5 ms (overdrive), >5 ms for gated continuous |
|
Duty Cycle Range |
Typical <1% for high current overdrive, Up to 100% for constant on continuous current *Dependent on the limitations of the connected light |
|
Dimming Range |
10% - 100%, Adjustments via Camera Controls (0 - 10 V Analog) |
|
Status Indicator LEDs |
Green: Power, Yellow: Communication, Red: Error |
|
Communication |
Hardware trigger and brightness controlled via connected camera for Zebra (HCS-150-ZEB) version |
|
Operating Temperature |
0°C to +40 °C |
|
Storage Temperature |
-25°C to +85 °C |
|
IP Rating |
IP67 |
|
Dimensions |
Length: 3.51 in (89.2 mm) Width: 1.21 in (30.8 mm) Height: 4.75 in (120.1 mm) |
|
Weight |
0.632 lbs (0.287 kg) |
|
Mounting |
35 mm DIN-rail or M4 Nut Channels |
|
Case Material |
Aluminum |
|
Warranty |
5 Years |
|
Compliance |
CE, RoHS |
|
*Values shown are based on controller component limitations. Actual limitations will vary depending on the limits set for the connected light head. These limits are determined using Advanced Illumination's proprietary SignaTechTM (Signature Technology) in order to ensure safe peak performance. |
Mechanical Specs
Electrical Specs
More Product Information
- Eliminating all but a narrow band of light (+/- 40nm) centered on the specified wavelength, band pass filters are used to enhance colors, or to stop unwanted ambient light from reaching the camera.
- Filtering can replace existing shrouds, simplifying the physical set up of an inspection site.
- Ai offers 660nm and 635nm band pass filters to fit a number of different lens sizes.
- Detented, 30 position potentiometer for repeatable dimming with cable inline controllers
- Built in DIN-rail or panel mounting feature
- Flip up cover for potentiometer to prevent accidental adjustments
- Spring clamp wiring terminal for vibration proof installation
- NEW M12 selector switch for use with iCS 2 (IC) and iCS 3 (I3) M12-based lights
-
IRIG A & B, NASA 36 and 1 PPS inputs standard
-
HaveQuick sync option
-
Propagation delay compensation
-
Zero latency time reads
-
Match Time output
-
IRIG B time code output
-
External Event time tags
-
On-board GPS receiver option
-
User programmable heartbeat rate
- The SL2507 is characterized as a Small Aimed Spot Light.
- Precisely aimed LEDs provide a level of lighting control not found in traditional illuminators.
- A range of standoffs and fields of view may be specified at the time of order.
- The spot light is available in a wide range of wavelengths from UV to IR.
- Diffuser and polarizer options are also available.
- The SL2507 provides 2.6kLux at a working distance of 4” (100mm).
- Part of the MicroBrite™ family of high performance, compact machine vision lights.
- This line light series utilizes a fresnel lens for a compact form factor.
- Provides an intensity level of 189kLux (working distance of 75mm)
- Expandable in 50mm increments up to 750mm
-
Best solution for high accuracy IV/CV, low-noise and 1/f measurements with PureLine, AutoGuard and next generation MicroChamber technologies
-
Enables up to 5x faster time to accurate data
-
Advanced 4-axis semi-automatic stage for accurate positioning and repeatable probe-to-pad contact
-
RF/microwave device characterization, 1/f, WLR, FA and design debug
-
Wide range of extremly performant, reliable thermal chuck systems from ATT
-
Easy on-screen navigation, wafer mapping, and operation of accessories and thermal systems with Velox
-
User-centered design minimizes training costs and enhances efficiency
See more Key Features on Specifications & Details tab
- The LL158 Series produces an oblique (30°) line of illumination for line scan applications in a passively cooled design.
- When oriented across a moving web or conveyor line, unlike standard line lights, this linear light’s unique geometry highlights engraved or raised lines that run parallel to the material travel.
- Provides an intensity level of 53kLux (working distance of 75mm).
- Pre-engineered for expandability in 6” (152mm) increments up to 90” (2.28m).
- Available intensity control provides illuminance adjustability for every 6″ increment via a 0 – 10v input.
The LN112-30 Lens Adaptor is used for creating a 30° focused beam spread when attached to a SL112 or SL162.
Advanced Illumination
Advanced Illumination® (Ai) is a leading developer and manufacturer of LED lighting and control technology for machine vision illumination. Founded in 1993, Advanced Illumination was the first company to bring LED lighting to market and has since become one of the most trusted names in the machine vision industry. Ai offers a number of highly customizable backlights, bar lights, coaxial lights, diffuse lights, line lights, bright field ring lights, dark field ring lights and spot lights. Whether you’re an OEM or an end user, Advanced Illumination has a knowledgeable team of engineers and manufacturing professionals ready to provide you with a solution tailored to your lighting needs.
Contact Details
Advanced Illumination, Inc.
440 State Garage Road, Rochester, VT 05767, USA
Phone: 802-767-3830
Fax: 802-767-2636
Imaging/Machine Vision
Download Line Card
Document
