• The DF241 is characterized as a Small Low Angle Dark Field ring light. 
• Precisely aimed LEDs provide a very low angle of incidence, radial illumination pattern. 
• A scratch on a sheet of glass is a good example of a defect that can be detected with a low-angle dark field illuminator. 
• With a light intensity of 24kLux at a working distance of ½” (12.5mm), the DF241 is perfect for imaging problems limited to a small field of view. 
• A 25mm field of view is standard with an optional field of view of 35mm. 
• Available in a range of wavelengths from UV to IR. 

*Engineered to provide comparable optical characteristics to our previous RL1360.

• The IC Inline Controller provides steady and optimal current to lights from a small package when larger, more versatile discrete controllers are not necessary. 
• The IC provides continuous-on and DC gating on/off control as well as 0-10 volt analog dimming. 
• All ICS models employ reverse input polarity protection. 
• A wash down version is provided with any light to which it is attached is also wash down. 
• 0 – 100% Intensity Control with optional DCS-MP, purchased separately, will provide manual intensity control via an external potentiometer.

• The RL2115 is characterized as a Compact Aimed Dark Field ring light. 
• Precisely aimed LEDs provide a specific and repeatable light pattern on the imaging plane. 
• There are a wide range of wavelengths available from UV to IR.

• 0 – 100% intensity control 
• For use with lights built with an ICS 2 after 3/1/2012 
• NOT COMPATIBLE with LLI37, BLI38, LLI67, and BLI68 “IC” Lights

• Part of the MicroBrite™ family of high performance, compact machine vision lights. 
• This line light series utilizes a fresnel lens for a compact form factor. 
• Provides an intensity level of 189kLux (working distance of 75mm) 
• Expandable in 50mm increments up to 750mm

Customers can leverage our multi-tier approach to customization to reduce engineering costs.

• Our adaptable Build-to-Order (BTO) system provides for very short lead times and allows a product to be configured from a large set of predetermined parameters, with hundreds of thousands of BTO combinations available. BTO products are indicated in the product data-sheet and are shipped within 1-3 weeks, depending on the product. 
• Our Semi-Custom products require some additional design and documentation effort but can be a smart choice when more flexibility is required. 
• Lastly, a full Custom product can be developed when your budget and time frame allows. This option supplies you with a fully custom-designed and built lighting solution that will be engineered to fit your exact machine vision needs.

Optimized Measurement Setup

• Multi-purpose SIGMA instrument integration kit
• Shorter cabling and universal chuck connection
• Triax probe with protected guard
• Optimized signal path
• Safe probe tip exchange
• Seamless integration of various analyzers

High Power Chuck

• Triax design for low-leakage measurements up to 3 kV
• Special chuck surface coating
• High-isolation ready
• High-current measurement up to 100 A with lowest contact resistance
• Optional upgrade for 10 kV (coax) operating voltage
• Thin wafer handling capability

Safe Operation

• Arcing protection
• Shield Enclosure with interlock
• Advanced grounding concept
• Maximum protection from high-voltage shock for users and devices
• Common ground protection for all instruments
• EMI/light-tight shielded environment

• Eliminating all but a narrow band of light (+/- 40nm) centered on the specified wavelength, band pass filters are used to enhance colors, or to stop unwanted ambient light from reaching the camera. 
• Filtering can replace existing shrouds, simplifying the physical set up of an inspection site. 
• Ai offers 660nm and 635nm band pass filters to fit a number of different lens sizes.

• Network Enabled Distribution Amplifier 
• Low Phase Noise Reference Frequency Outputs 
• Fault Alarm Output 
• 1U 19″ Rack Mount 
• Frequency Synthesizer Option 
• Hitless Switching of Reference 
• Programmable Amplitude 
• Propagation Delay Compensation 
• 10 MHz Standard, Other Frequencies Available