The energy industry is primed for a wave of monumental change. The transition to renewable and alternative energy sources, advancements in energy storage, the rise of smart grids, and the electrification of transportation are driving significant changes domestically and globally. These developments mean organizations require new testing protocols, enhanced safety standards, advanced testing equipment, and comprehensive interoperability and cybersecurity assessments. Regulatory changes and technological innovations further complicate testing requirements, demanding scalable and real-world simulation capabilities. When testing facilities must adapt rapidly to support R&D efforts, it’s essential that they ensure the safe, efficient, and sustainable deployment of new energy technologies. All of these factors demand energy laboratories that are future-proofed for innovative solutions.

• Vector Network Analyzer Frequency Range from 10 MHz up to 3.2 GHz 
• Spectrum Analyzer Frequency Range from 9 kHz up to 3.2 GHz 
• -156 dBm/Hz Displayed Average Noise Level (Typ.) 
• -98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.) 
• Total Amplitude Accuracy < 1.2 dB 
• 1 Hz Minimum Resolution Bandwidth (RBW) 
• All-Digital IF Technology 
• Standard Preamplifier 
• Distance to fault capability using VNA time domain analysis 
• Up to 1.5 GHz Tracking Generator Kit 
• Built-in Advanced Measurement capability (CHP, ACPR, OBW, CNR, TOI, etc) 
• 10.1 lnch WVGA (1024 x 600) Display

• This ultra high intensity line light series is built to handle the most extreme line scan lighting requirements. 
• Provides an intensity level of 2,100 klx (working distance of 75 mm). 
• Pre-engineered for expandability in 150 mm (6”) increments up to 2400 mm (94.5”). 
• Available in multiple wavelengths. 
• In the event of abnormally high ambient temperatures, the device automatically shuts down when the housing reaches 60°C and resumes operation at 56°C. 

Note: Requires third party power supplies – refer to spec sheet.

• The DF241 is characterized as a Small Low Angle Dark Field ring light. 
• Precisely aimed LEDs provide a very low angle of incidence, radial illumination pattern. 
• A scratch on a sheet of glass is a good example of a defect that can be detected with a low-angle dark field illuminator. 
• With a light intensity of 24kLux at a working distance of ½” (12.5mm), the DF241 is perfect for imaging problems limited to a small field of view. 
• A 25mm field of view is standard with an optional field of view of 35mm. 
• Available in a range of wavelengths from UV to IR. 

*Engineered to provide comparable optical characteristics to our previous RL1360.

• Our Standard Intensity Linear Backlights provide rugged construction for demanding environments. 
• Standard intensity illumination with low power input requirements. 
• Multiple wavelengths available with very consistent illumination over the entire active area. 
• Available in 1” (25mm) increments with lengths up to 80.5” (2044mm).

• High dispersion for reflective surfaces and shorter working distances. 
• Provides a narrower and less intense illumination area than the AL116. 
• IP65 compliant washdown option is available, as are a wide spectrum of wavelengths. 
• Available with polarization and diffusion light conditioning. 
• This expandable compact bar light is pre-engineered for custom lengths in 2″ increments up to 40″.

• The RL3940 is characterized as a Folded Beam Dark Field ring light. 
• Precisely aimed LEDs, along with an aluminum beam folder, provide a specific and repeatable light pattern on the imaging plane. 
• The light provides up to 11kLux at a working distance of .6” (15mm). 
• The RL3940 is available in a wide range of wavelengths from UV to IR. 
• The folded-beam configuration provides dark field illumination in a compact 3.9” (100mm) housing. 
• The housing’s large inner diameter can accommodate lenses up to 55mm in diameter. 
• The light can also be ordered with an optional mounting ring.