-
Our White High Intensity Linear Backlights offer 540 kLux output, perfect for back-lit, line-scanning applications.
-
Available in pre-engineered sizes from 6” (152mm) to 96” (2438mm) in 6″ increments.
-
A 3″ (75mm) length option is also available. Available intensity control provides illuminance adjustability for every 6″ increment via a 0 – 10v input.
-
Available in white only. For additional wavelengths please refer to our BL138 series.
Sorensen - XDL Series II - 105W - 215W Digitally controlled linear benchtop DC power supply
- Multiple voltage⁄current ranges
- Direct numeric entry and incremental rotary control of voltage and current
- The remote or local sense
- Illuminated keys and display legends.
- Up to ten store/recall set-ups (30 setups for triple output)
- Power output display
- Link and copy mode
The Sorensen XDL series II bench power supply represents the "next generation" of high-performance laboratory DC power supplies.
The XDL DC bench power supply provides multiple ranges for increased current capability at lower voltages and uses pure linear technology.
Unlike other digitally controlled units, the XDL series II lab power supply provides both numeric and rotary control while the illuminated keys and display legends provide instant confirmation of settings and status.
For added convenience, the Sorensen XDL series II bench power supply provides storage of up to 10 power supply set-ups in non-volatile memory (30 set-ups for a triple). There are also fully adjustable over-voltage and over-current trips. The XDL series II also provides full remote sense capability via dedicated sense terminals.
The XDL triple output model features link and copy mode for convenience. When linked, the keyboard and jog wheel control operate both outputs simultaneously. The copy function copies all settings for output 1 to output 2.
Protection
- Over voltage protection
- Over current protection
- Over temperature protection
- Sense protection
|
Output : Voltage and Current |
|||
|---|---|---|---|
|
Model |
Output Range |
Output Range 2 |
Output Range 3 |
|
35-5 |
1 0-35 V, 0-3 A |
0-15 V, 0-5 A |
0-35 V, 0-500.0 mA |
|
35-5T |
0-35 V, 0-3 A |
0-15 V, 0-5 A |
0-35 V, 0-500.0 mA |
|
35-5P |
0-35 V, 0-3 A |
0-15 V, 0-5 A |
0-35 V, 0-500.0 mA |
|
35-5TP |
0-35 V, 0-3 A |
0-15 V, 0-5 A |
0-35 V, 0-500.0 mA |
|
56-4 |
0-56 V, 0-2 A |
0-25 V, 0-4 A |
0-56 V, 0-500.0 mA |
|
56-4P |
0-56 V, 0-2 A |
0-25 V, 0-4 A |
0-56 V, 0-500.0 mA |
|
56-4TP |
0-56 V, 0-2 A |
0-25 V, 0-4 A |
0-56 V, 0-500.0 mA |
|
Model |
Outputs |
Output Power |
Interface (GPIB/RS-232/USB) LAN-LXI |
|---|---|---|---|
|
35-5 |
1 |
105 W |
No |
|
35-5T |
3 Aux, 1-6 V, 3 A |
215 W |
No |
|
35-5P |
1 |
105 W |
Yes |
|
35-5TP |
3 Aux, 1-6 V, 3 A |
215 W |
Yes |
|
56-4 |
1 |
112 W |
Yes |
|
56-4P |
1 |
112 W |
Yes |
|
56-4TP |
3 Aux, 1-6 V, 3 A |
112W |
Yes |
|
Voltage Setting |
By floating point numeric entry or rotary jog wheel; resolution 1mV |
||
|
Current Setting |
By floating point numeric entry or rotary jog wheel; resolution 1mA or 0.1mA depending on range |
||
|
Voltage Setting |
Resolution 1mV Accuracy ± (0·03% + 5mV) |
||
|
Current Setting |
Resolution 1mA; 0·1mA on 500mA range Accuracy ± (0·2% + 5mA); ± (0·2% + 0·5mA) on 500mA range. |
||
|
Output Mode |
Operation in constant voltage or constant current modes with automatic cross-over and mode indication by LEDs. |
||
|
DC Output Mode Switch |
Sets output voltage and current levels to zero when Off. |
||
|
Output Terminals |
4 mm terminals on 19 mm (0.75”) spacing |
||
|
Load Regulation |
Voltage: < 0.01% + 2 mV Current: < 0.01% + 250 μA; < 0.01% + 50 μA on 500 mA range (measured at output terminals using remote sense) |
||
|
Line Regulation |
Voltage: < 0.01% + 2 mV for 10% line change Current: < 0.01% + 250 μA; < 0.01% + 50 μA on 500 mA range |
||
|
Ripple and Noise |
Typically < 0.35% Vrms 2 mVp-p CV mode, and < 0.2 mArms, < 20 μArms (500 mA range) CI mode |
||
|
Transient Response |
50 μs to within 15 mV of set level for a change in load current from full load to half load or vice versa |
||
|
Temperature Coefficient |
<± (50 ppm + 0.5 mV) / °C (voltage) |
||
|
Remote Sense |
Eliminates up to 0.5 V drop per lead. Remote sense operation selected from front panel and indicated by LED |
||
|
Sense Terminals |
Recessed sprung sockets for direct insertion of wires. Duplicated on rear terminal block (P versions only) |
||
|
General Specifications |
|
|---|---|
|
Operational AC Input Voltage |
115 V or 230 V ± 10% (adjustable internally, option HV for factory set 230 Vac input), 50/60 Hz. Installation Category II |
|
Operating Temperature Range |
5 to 40°C, 20% to 80% RH |
|
Storage Temperature Range |
- 40 to 70°C |
|
Dimensions ( H x W x D) |
6.3 x 5.5 x 11.4” (160 x 140 x 290 mm) (XDL 35-5, XDL 35-5P, XDL 56-4, XDL 56-4P), 6.3 x 11.0 x 11.4” (160 x 280 x 290 mm) (XDL 35-5T, XDL 35-5TP, XDL 56-4T, XDL 56-4TP) |
|
Weight |
11.9 lb (5.4 kg) (XDL 35-5, XDL 56-4) 12.1 lb (5.5 kg) (XDL 35-5P, XDL 56-4P) 23.1 lb (10.5 kg) (XDL 35-5T, 56-4T) 23.3 lb (10.6 kg) (XDL 35-5TP, 56-4TP) |
|
Benchtop Operation |
Folding legs are incorporated that can be used to angle the front panel upwards when required |
|
Rack Mount Operation |
19-inch 4U mount for up to three single output units or one triple, plus one single Blanking plates available for unused sections |
|
Approvals |
CE-marked units meet: EN61010-1 and EN61326 |
|
Specifications subject to change without notice. |
|
More Product Information
- Energy absorber with a rating of 400VDC at ±150A
- Provides up to 400V at 150A for 60kW of output power
- Energy Absorber Load chassis creates a total resistance of approximately 1.5 Ohms at 30kW continuous and 60kW peak
Signal Generations, Arbitrary Waveform generation and Digital to Analog output modules for providing signal simulation capability
- The LL158 Series produces an oblique (30°) line of illumination for line scan applications in a passively cooled design.
- When oriented across a moving web or conveyor line, unlike standard line lights, this linear light’s unique geometry highlights engraved or raised lines that run parallel to the material travel.
- Provides an intensity level of 53kLux (working distance of 75mm).
- Pre-engineered for expandability in 6” (152mm) increments up to 90” (2.28m).
- Available intensity control provides illuminance adjustability for every 6″ increment via a 0 – 10v input.
- Complete solution - battery test, simulation & solar array simulator software included
- Highest power density up to 37 kW in 4U rack height (9.25 kW/U)
- Fastest and cleanest power available (fastest transient response and low output ripple and noise)
- Universal 3-Phase AC Input accepts 180 VAC to 528 VAC
- Longest manufacturer-based reliability guarantee: 5-year warranty
- Parallel system power up to 1.2 MW
- Output voltage up to 2,000 V
- Bidirectional output current up to ±150 A, up to ±4,800 A in parallel
- True extended wide-range autoranging output
- Regenerative to 95%
- Color touch panel user interface
- Seamless transition between source and sink
- Built-in islanding detection
The SMX-4xxx product family includes the SMX-4411 through SMX-4415 matrix switches.
- Three independent, isolated DC output power supply 600W channels
- Total DC power density up to 1800W in a 1U chassis
- 5 autoranging output channel options
- Intuitive color touch panel control
- Multi-language display for global operation
- Multi-channel programmable sequencing, ramps, and delays
- Active power factor correction (PFC)
- Standard LXI LAN, USB, and RS232 interfaces
- Optional GPIB interface
- Full remote control via Virtual Panels™
- The Wide Linear Diffuse Light series is ideal for the inspection of elongated or cylindrical objects.
- Perfect for inspections requiring a multi-camera setup.
- Can be provided with up to 4 viewing ports.
- Expandable lengths from 6” – 36” (152 – 194mm) in 6” increments.
AMETEK Programmable Power
Located in San Diego, California, AMETEK Programmable Power designs, manufactures, and markets precision, AC and DC programmable power supplies, electronic loads, application specific power subsystems, and compliance test solutions for customers requiring and valuing differentiated power products and services. Also part of our business is VTI Instruments, which delivers precision modular instrumentation and systems for electronic signal distribution, acquisition, and monitoring, used in the world's most demanding test applications.
AMETEK Programmable Power boasts one of the industries' broadest portfolios of programmable power products under the well-known and respected Sorensen, Elgar, and California Instruments brands. AMETEK Programmable Power’s products serve a wide range of stimulus (T&M) and process power needs in applications including semiconductor fabrication, commercial and defense ATE, oil exploration, solar array and battery string simulation, avionics, general R&D and EMC compliance testing.
VTI Instruments provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time.
With strong brands, a broad product portfolio, exceptional precision power conversion and control expertise, proven power system integration capabilities and deep applications knowledge, AMETEK Programmable Power is your source for programmable power supplies, precision data acquisition instruments, and more.
Contact Details
AMETEK Programmable Power, Inc. − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries
Test & Measurement
Download Line Card
Document
