Junkosha - 2 Series cables - Extra Flexibility and Durability
Our 2 Series cable assembly showcases excellent phase stability against bending, developed with microwave/mmWave measurement environments in mind.
Its flexibility means low repulsion, reducing the load on the measured object
|
Cable Type |
Maximum Usable Frequencies |
Standard Insertion Loss (dB/m) |
Outer Cable Diameter (mm) |
Cable Weight (g/m) |
Continuous Operating Temperature Range (°C) |
Assembly Length (mm) |
Notes |
||
|---|---|---|---|---|---|---|---|---|---|
|
18.5GHz |
Maximum Frequency |
Minimum |
Maximum |
||||||
|
MWX221 |
26.5 GHz |
1.2 |
1.4 |
6 |
64 |
-30~+85 |
200 |
5000 |
Standard Catalog Product |
|
MWX221 Armored Type |
12.5 |
212 |
700 |
5000 |
Standard Catalog Product |
||||
|
MWX241 Armored Type |
40.0 GHz |
1.8 |
3 |
9.5 |
137 |
700 |
5000 |
Standard Catalog Product |
|
|
MWX241 Non-Armored Type |
4.1 |
35 |
200 |
5000 |
Made to Spec |
||||
|
MWX251 Armored Type |
50.0 GHz |
2.1 |
3.8 |
9.5 |
129 |
700 |
1500 |
Standard Catalog Product |
|
|
MWX251 Non-Armored Type |
3.7 |
29 |
200 |
1500 |
Made to Spec |
||||
|
MWX261 Armored Type |
67.0 GHz |
2.9 |
5.6 |
7.7 |
90 |
700 |
1500 |
Standard Catalog Product |
|
|
MWX261 Non-Armored Type |
2.6 |
17 |
200 |
1500 |
Made to Spec |
||||
This table provides standard length availability within our catalog. We can provide custom lengths upon request; please contact us to discuss.
Features
- Excellent flexibility and phase stability against bending
- We also have an extensive lineup of connectors
- Select an armored type for reduced external mechanical damage
Use
- For mmWave/microwave band measurement
- For measurement of minute devices for which flexibility is required
Flexibility Data
A test cable measuring 1,000 mm in length was formed into a circle with an internal diameter of 300mm. Both ends were overlapped and secured with tape measuring 50 mm in width. The circularly formed test cable was then suspended, with the overlapping end section at the top and a weight positioned at the bottom. Circularity was measured after five seconds. (Circularity is expressed as the ratio a/b.)
Document
More Product Information
- The DL225 series of square coaxial lights features a modular heat sink and circuit design for enhanced performance, product availability and lead time.
- These coaxial lights are available in a wide variety of wavelengths from UV to IR.
- They provide intensities from 18kLux for the DL225-025 to approximately 50kLux for the larger models.
Multiplexer switch modules up to 1000VDC in a 1, 2 or 4 wire configurations.
- Support the most high-performance Camera Link cameras with available support for Full and 80-bit mode at up to 85 MHz
- Perform deterministic image acquisition by way of the jitter-free Camera Link 2.1 interface
- Maximize system compatibility with the choice of PCIe® 2.1 x1, x4 or x8 connectivity
- Eliminate missed frames with ample onboard buffering and PCIe bandwidth
- Optimize multi-camera applications via support for up to four Base or two Full/80-bit Camera Link cameras per board
- Minimize space requirements and maximize PC compatibility through a half-length design with mini Camera Link connectivity for true single-slot operation
- Improve and simplify system connectivity with Power-overCamera-Link (PoCL) support at extended cable lengths
-
Designed for machine vision applications that require broad illumination over a wide area with controlled fall off.
-
This BALA (Broad Area Linear Array) bar light series is expandable in 1″ increments up to 82″.
-
Applications requiring an even wider area of illumination can utilize two BALA bar lights aligned in parallel, facing each other.
-
AL150 derivatives include AL4424 (4″), AL4554 (9″) and AL46120 (20″) (which represent legacy part numbers)
- Three independent, isolated 1700W DC outputs, 5100W total
- 1U rack-mount chassis
- 9 output options
- Multi-language, intuitive, color touch panel control
- Global 3-Phase AC Input options for system phase balancing
- Active power factor correction (PFC)
- Multi-channel programmable sequencing, ramps, and delays
- Full remote control via Virtual Panels™ GUI
- Standard LXI Ethernet, USB, and RS232 control interfaces
- Optional GPIB control interface or isolated analog programming
-
Cryogen-free option available
-
Flexible sample space
-
Low noise, low vibration
-
Long holding time
-
Stable He-3 pot temperature
- S-parameters DC to 40 GHz, single-ended and mixed-mode
- Impedance Profile with <1 mm resolution, differential and common-mode
- Internal, automatic OSLT calibration
- USB-connected, small, lightweight
- Flexible display of the measurements
- Remove effects from fixtures, connectors and cables
- Emulate eye diagrams with CTLE, DFE and FFE equalization
- Advanced jitter analysis
Junkosha, Inc.
Junkosha is a pioneer of sophisticated fluoropolymer application technologies across a broad selection of industries, including the microwave interconnect sectors.
Our mantra – indeed the name Junkosha – is based on three Japanese characters that spell out the fact “we contribute to society’s development through technology”. This is taken one step further in our relationship with customers, partners and suppliers whereby our mission is to “enable technology innovators” through our products and the way we do business.
Reflecting our corporate motto of “delivering unsurpassed value,” Junkosha continually focusses on activities that address the unmet needs of our customers worldwide. Across the company, Junkosha delivers products that are of the highest quality, this in turn calls for the highest performance and diligence from staff and partners. In order to realize this, Junkosha strives to anticipate customer needs while achieving complete customer satisfaction. Every day, we are challenged to “develop advanced technologies”, “improve our products’ capabilities", and “seek new applications”. We respond to our customer’s requirements quickly, responsively and cost effectively.
Contact Details
Junkosha Inc. Japan Office - Tokyo Business Center
15F Ochanomizu-Kyoun Bldg., 2-2 Kanda-Surugadai, Chiyoda-ku, Tokyo, 101-0062, Japan
Phone: +81-3-3518-6520
Fax: +81-3-3518-6523
Junkosha USA Inc. West Coast Office
2415 Campus Drive, Suite 140, Irvine, CA 92612, USA
Phone: +1-949-825-6177
Test & Measurement
Download Line Card
Document
