• Up to 96 differential channels per full rack mainframe
• Constantly monitor input signals for fault conditions
• Flexible configurations for detecting edges, out-of-bounds conditions and measuring pulse widths
• Inputs can be masked, inverted, and combined to produce interrupts
• Can be used as a time stamp module and as a digital I/O
• Programmable debounce circuitry prevents erroneous readings
• 10 V and 100 V input ranges
• On-board memory stores events with IEEE 1588 timestamps
• Synchronize reading of input states with other scanned analog channels

• Up to 96 differential channels per full rack mainframe 
• Constantly monitor input signals for fault conditions 
• Flexible configurations for detecting edges, out-of-bounds conditions and measuring pulse widths 
• Inputs can be masked, inverted, and combined to produce interrupts 
• Can be used as a time stamp module and as a digital I/O 
• Programmable debounce circuitry prevents erroneous readings 
• 10 V and 100 V input ranges 
• On-board memory stores events with IEEE 1588 timestamps 
• Synchronize reading of input states with other scanned analog channels

NEO X01 3000 PSI Adapters

NEO 905 5080 PSI Adapters

The VTI Instruments 16-Channel bridge and strain gauge measurement instrument

• 24-bit, delta-sigma ADC, simultaneous sampling
• Programmable Sample Rate up to 128kSPS
• Full, Half & Quarter Bridge with 120Ω, 350Ω & 1kΩ bridge completion
• Voltage Excitation: 0.5V to 10V
• Current Excitation: 0.46mA
• 2-Wire & 4-Wire Ohms/RTD
• Bridge Zero Balancing
• Built-In-Self-Test (BIST)
• Strain Lead Wire Calibration
• Shunt Calibration: 50kΩ, 100kΩ & External provided by User
• TEDS Support
• LXI Ethernet Interface
• IEEE-1588 Synchronization
• Power over Ethernet (PoE) or 10–50 V DC input
• Built-in Parallel Data Streaming
• Full-featured Embedded Web Interface
• Compact 1U Half-rack Form Factor

All plugs ship with Skydrol (BMS3-11) Compatible O-Rings, Viton® Cuff and Four Metal Clamps. Parts in compliance with all SMOT document requirements.

NEO 901 3000 PSI Adapters

• 2 in 1: device contains the Hot Set Test as well as the Heat Pressure Test
• Robust and compact set including the device and an equipment case
• Possibility to attach a thermometer directly near the sample
• Measurement according to the cable standards IEC 60811 -507 (Hot Set Test) and IEC 60811 -508 (Heat Pressure Test) regarding sample attachment and weight attachment
• Precise choice of weights due to practical containers
• Simultaneous measurement of up to 3 cable or tube samples

NEO 50X Series