Luna - T-Ray® 5000 Series HTS40n2 Transmitter Type 2
-
Fiber coupled to allow easy movement
-
Ultra-broadband measurement
-
Transmitted or reflected data collection
-
Mates with collinear adapter (AXA40n1)
-
High signal to noise ratio
-
Hot swappable with other transmitters
-
Low noise to enable rapid data collection
-
Adjustable lens tube for focusing
-
Multiple lenses available
The HTS40n2 Transmitter Type 2 for the T-Ray® 5000 balances high output power with high spectral bandwidth and minimizes features following the pulse to allow high quality images and detection of multiple layers in reflection with less need for post processing of the waveform.
Coupled with an HRS40n1 receiver, the HTS40n2 provides bandwidth over 3.5 THz and signal to noise ratio above 70 dB. By balancing bandwidth and power, the HTS40n2 is ideal for applications where both high-resolution imaging and broad spectral range are desired.
Polarization Extinction Ratio | <20:1 (Horizontal) |
---|---|
Standard Lens | 25, 75, 150 mm (Collimating lens also available) |
Beam Diameter | 38 mm |
Mounting Hardware | 1/4-20 threaded mounting holes |
Size (W x H x D) | 7.5 x 7.5 x 15 inches |
Weight | 275 gm |
Applications
- Terahertz Time Domain Spectroscopy; solid, liquid, gas phase; polymorph discrimination; explosive detection
- Nondestructive materials inspection: aircraft; packaged goods; radome inspection; spacecraft; pipeline repairs
- Converting applications: paper coating; multilayer films; tire
More Product Information
-
Dynamic and absolute measurement of FBGs, LPGs, FP and MZ sensors
-
Up to 4 parallel channels per system
-
Data verification key guarantees only valid output; each data set is calibrated and verified against a permanent NIST traceable reference
-
Proven reliability and longevity, with over 100 million hours logged since 2000
-
Distributed reflectivity measurement
-
Event detectionLarge RL range
-
High spatial resolution
-
Clear identification of large and small peaks enables easier data interpretation
-
Dynamic and absolute measurement of FBGs, LPGs, FP and MZ sensors
-
Up to 16 parallel channels per system
-
Data verification key guarantees only valid output; each data set is calibrated and verified against a permanent NIST traceable reference
-
Proven reliability and longevity, with over 100 million hours logged since 2000
-
Up to 12 mm measurement range using a 1 mm stainless steel cable
-
Rugged aluminum enclosure with IP67 rating; suitable for outdoor installations
-
Internal protection of connectors/splices
-
Double-ended design supports multiplexing of many sensors on one fiber
-
Fully temperature compensated over the entire operating range
-
Fast response time, stable measurements, high resolution
-
Fiber coupled to allow easy movement
-
Ultra-broadband measurement
-
Transmitted or reflected data collection
-
Mates with collinear adapter (AXA40n1)
-
High signal to noise ratio
-
Hot swappable with other transmitters
-
Low noise to enable rapid data collection
-
Adjustable lens tube for focusing
-
Multiple lenses available
-
5000VA, 4000W, 115VAC 50/60Hz Input and 120VAC 60Hz Output, Double Conversion, On Line, High Temperature, Isolated, Rugged UPS with Power Factor Correction for Shipboard Applications
-
High efficiency: up to 86.9 %
-
Low no load power consumption < 90 mW
-
Meets DoE efficiency level VI
-
CoC version 5 ready
-
Ultra-low leakage current ≤ 10 μA
-
IEC 60601-1-2, 4th edition
-
Ultra-wide operating temperature range 0 - 50°C
-
Isolation 2x MOPP
-
Double housing safety: snapped & welded
-
IP42 approved interchangeable plug system as additional accessories
-
IEC 60601-1-11 ready with IPX2 adapter
-
New release with 5000 m altitude
-
Ease of installation simple and repeatable installation
-
Discrete, low profile, multipoint up to 304 sensors on a single HYPERION instrument
-
Dynamic and static 1 to 5kHz range
-
Multiparameter various physical parameters measurements coupled onto the same instrumentation platform
-
Long distance, with over 10km of coverage
-
Ultra-compact design
-
Affordable
-
Power over Ethernet
-
30.3 fps at full resolution
-
Monochrome (G-125B) and color (G-125C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
Luna Innovations
Luna Innovations mission is to help advance the continuing increase in data transmission rates for the public & private communications network with high speed optical receivers and test products, while also leveraging our unique fiber optic sensing technology to improve the structural testing of new composite elements and components in new aircraft and automobiles.
Luna Innovations Incorporated (NASDAQ: LUNA) was founded in 1990 and has been successful in taking innovative technologies from the applied research stage to product development and ultimately to the commercial market. In some cases, the successes led to the creation of independent businesses. We have created companies in our area of focus, sold some of them to industry leaders in their fields, raised private capital, formed joint ventures and entered into a number of licensing agreements.
Contact Details
Luna Innovations Inc.
301 1st Street, SW, Suite 200, Roanoke, VA 24011, USA
Phone: 540-769-8400