-
Rugged, cast aluminum housing has an outer diameter of 8.4” (213mm) and an inner, working diameter of 6.1” (155mm).
-
The Medium Dome Light is available in a wide range of wavelengths including a 3 channel, RGB configuration.
-
Provides up to 59kLux at a 1” (25mm) standoff.
IntelliPower - FA10088 Rugged UPS
-
1500VA, 1000W AC, 120VAC , 50/60Hz Input and 120VAC 50/60Hz Output, Double Conversion, On-Line, High Temperature, Lithium Iron Phosphate Battery Hot Swap Drawer, Rugged UPS with Power Factor Correction
TYPE | SPECIFICATION |
---|---|
Power Rating | 225W |
Chassis Configuration | 1U, ≥24"D |
Input Voltage | 115 VAC |
Input Frequency | 50/60 |
Input Connector | IEC320 |
Output Voltage | 110 VAC |
Output Frequency | 50/60 |
Output Connector | NEMA Type |
Battery Runtime | < 20 minutes |
Battery Chemistry | Lithium Iron Phosphate |
Battery Configuration | Hot Swap |
Communication | SNMP |
More Product Information
-
2500VA 1800W, 115VAC 3Ph, 400Hz Input and 115VAC (300W) 28VDC (1500W) Output UPS
Built to Southwest Microwave’s rigorous performance and quality standards, the 1.0mm connectors are rugged and durable, featuring a 360° raised grounding ring and operational temperature rating of -55°C to +165°C. 1.0mm connectors provide mode-free operation through 110 GHz, offering well-matched impedance, excellent repeatability, and the industry’s lowest VSWR (1.2:1), insertion loss (0.6 dB), and RF leakage (≤ -100 dB).
-
Up to 450mm measurement range using a 1 mm stainless steel cable
-
Rugged aluminum enclosure with IP65 rating; suitable for outdoor installations
-
Internal protection of connectors/splices
-
Double-ended design supports multiplexing of many gages on one fiber
-
Fully temperature compensated over the entire operating range
-
Fast response time, stable measurements, high resolution
-
Single-phase, 115 VAC at 60 Hz Input, Isolated, Double Conversion Rugged Frequency Converter with 1000 Watts at 24 VDC output to provide Power Conversion and Power Conditioning
- The fourth generation of Ai’s popular Inline Control System.
- High Output Power: Capable of delivering 2.1 amps of continuous output and up to 8 amps in overdrive strobe at 24V, outperforming all other inline controllers on the market.
- Compact & Rugged: Sleek enough to fit through wiring conduit with its compact anodized aluminum housing and sealed to IP68 standards for prolonged liquid immersion and complete dust protection.
- Plug-and-Play Functionality: Enabled with SignaTech™, allowing for simplicity when overdriving, without risk of damage to the lighthead.
-
DC-40 GHz bandwidth
-
10 ps rise time
-
Low insertion and return loss
-
2 mils of tip-to-tip compliance
-
High probing angle and clearance
-
3000 VA, 2.2KW, 115 VAC, 50 Hz/60 Hz Input with 115 VAC, 60 Hz Output, Double Conversion, Rugged, High Temperature, Non-Isolated, On Line UPS with Power Factor Correction & SNMP Communications for Military Applications
-
Rugged Rack Mount Double Conversion On Line Isolated Power Conditioning System with Power Factor Correction (No batteries)
IntelliPower, Inc.
IntelliPower, Inc., located in Orange, California, has been designing, manufacturing and supporting high-performance, cost effective Uninterruptible Power Systems (UPS) and frequency/voltage conversion solutions to protect mission-critical applications since 1988. IntelliPower’s on-line, double conversion UPS, power conditioner and frequency/voltage converter solutions utilize digitally controlled, high-efficiency power switching technology that has been proven for over 32 years on numerous platforms.
Customers with demanding environments use IntelliPower’s rugged products because of our proven record of providing outstanding solutions. IntelliPower’s in-house development proprietary circuit design, DSP firmware/software technology and wide range of enclosure designs, give IntelliPower unmatched capabilities to deliver systems configured to customer requirements backed by expert support.
Our ability to design and configure quickly is based on our standard proprietary subassemblies that go into variations of our power systems as required. Our product configurator tools and application engineers allow you to easily define your requirements and obtain your proposal for solutions that exactly meet your needs.
Contact Details
IntelliPower, Incorporated
1746 North Saint Thomas Circle, Orange, California 92865, USA
Phone: 714-921-1580
Fax: 714-921-4023
Email: ca-ora-sales@ametek.com
Contact form