-
The Pulsar 320E provides the ultimate in lighting control for strobe-only, high power applications.
-
2 outputs for controlling 2 lights independently, each capable of 50A @ 100V DC.
-
NOTE: If you’ve purchased a Pulsar 320 in the past, please see the change notice below for details on what updates have been made to the Pulsar series.
FRIWO - Motor Control Unit MC6000 (6kW)
-
Machine type: permanently excited synchronous motors (PMSM).
-
Control type: Field-oriented control incl. field weakening
-
Position sensor: Hall sensor
-
Functions: Automatic teach-in function. four travel mode settings, reverse gear, boost function, display control, smartphone app.
Product information "Motor Controller"
The Motor Control Unit for brushless electric drives was developed for use in light electric vehicles of the new European L1E vehicle class. With a continuous output of up to 6kW, the Motor Control Unit delivers sufficient power to accelerate light electric vehicles confidently through everyday life. For particularly powerful applications and special vehicles, up to 12kw peak power is available. In more than 5 million test kilometers in electric scooter sharing applications, this control has proven to be remarkably robust.
Due to the in-house development of our hardware and software, we can react very flexibly to your customer requirements. The software FRIWO Enable Tool supports you in setting and maintaining our controllers in development, production and aftersales.
For connection to a PC you need a USB cable type "A" to "A". You will find this under "Accessories".
The most important data of the motor control unit at a glance:
Electrical parameters:
- Operating voltage: 14V - 65V
- Phase current: 300A
Connectivity:
- Communication: CAN, smartphone connectivity.
- Diagnostic interface: USB, CAN
- Analog inputs: 2
- Digital inputs: 2
Additional information
- Diameter: 155mm
- Height: 45 mm
- Weight: 970 g
Document
More Product Information
-
Defect pixel correction (on/off)
-
Fixed pattern noise correction (on/off)
-
Region of interest (ROI)
-
Gain (manual control, 0 to 20 dB)
-
Exposure (manual control, 44.2 µs to 1.4 s)
-
Gamma correction
-
Reverse X
-
DeviceLinkThroughputLimit (easy bandwidth control)
-
Sync out modes: Waiting for a trigger, exposing, readout, imaging
-
Storable user sets
-
Up to 10 kM distance from PC to mainframe through fiberoptic interface
-
40 MB/s block transfer rates
-
Embedded Web Interface provides interactive utility to control instruments
-
Rack-Rack TTL trigger extension through on-board LXI Trigger Bus
-
Backward compatibility with VXI 1.4 and 2.0 products
-
External Clock In/Out with on-board options for TCXO/OCXO
-
VXI plug&play compliant
Key Features Ls Series
-
Backward Compatible with L Series
-
Function and bus compatible with the California Instruments L Series
-
-
Three phase and Single phase modes
-
Ideally suited for avionics and defense applications
-
-
3 KVA to 18 KVA Power Levels
-
Match power source and cost to application requirements
-
-
Transient Programming
-
Test products for susceptibility to AC line disturbances
-
-
Built-in Measurements
-
Performs voltage, current, and power measurements
-
-
Advanced Features
-
Arbitrary waveform generation, harmonic analysis, GPIB interface are some of the available options
-
-
Interface
-
Standard USB & RS232C interface.
-
Optional GPIB & LAN available
-
-
CE Marked (400V input model ONLY)
-
Safe, reliable, and consistent operation
-
Key Features Lx Series
-
Backward Compatible
-
Compatible with HP6834B & iL Series AC Sources Function & bus compatible with the Agilent HP6834B & California Instruments iL Series
-
-
Three phase and Single phase modes
-
Ideally suited for avionics and defense applications
-
-
3 KVA to 18 KVA Power Levels
-
Match power source and cost to application requirements
-
-
Arbitrary Waveform Generator
-
Test products for harmonics susceptibility
-
-
Built-in Power Analyzer
-
Performs voltage and load current harmonic analysis and waveform acquisition
-
-
Standard IEEE-488, USB & RS232
-
Remote control interface for ATE system integration include
-
- Improves your QA through configurable logging
- Allows you to retain power of control on how boards are tested by third parties
- User-friendly environment reduces your training costs for production operatives
- Ability to test multiple boards, simultaneously, by using multiple XJLinks
See Specifications & Details tab for additional information
-
Industry Leading Power Density
-
Up to 1500 Watts in 1U
-
-
Standard Digital Interfaces – USB&RS232/485
-
LXI Ethernet and Isolated analog interfaces
-
Power Factor Correction-PFC and universal AC input
-
“Green” Sleep Mode – Automatically “sleeps” after period of non-use
-
Built in sequencing - Unload your system controller
-
Programmable fold-back protection delay
-
The SL1236 is characterized as a Large Aimed Spot Light.
-
Precisely aimed LEDs provide a level of lighting control not found in traditional illuminators.
-
A range of standoffs and fields of view may be specified at the time of order.
-
The spot light is available in a wide range of wavelengths from UV to IR, including a 3 channel RGB version.
-
Diffuser and polarizer options are also available.
-
The SL1236 provides 14kLux at a working distance of 4” (100mm).
Our custom equipment process design engineers and in-house fabrication staff, including electricians, machinists and welders are experts at creating custom components that precisely meet recommended specifications and tolerances. Our manufacturing facility is staffed with engineering and production personnel who work side-by-side. The facility offers full machining capabilities, complete metal fabrication, space for equipment prototypes and facility mockups, software integration and a UL listed electrical and control panel build shop. Our in-house capabilities allow us to meet the schedule, budget and operational requirements of the most demanding applications.
FRIWO
Based on 50 years of experience, FRIWO today has a global presence with modern development centres, production facilities and sales in Europe, Asia and North America. The FRIWO brand stands for innovative strength, security, safety, quality, and efficiency around the world. As proof of this, we are certified according to DIN ISO 9001 (Quality Management), DIN ISO 14001 (Environmental Management), and DIN ISO 13485 (Quality management for medical devices). At the end of the 2020 fiscal year, the company employed over 2,500 people worldwide and generated revenue of 99.4 million euros.
As an international system provider, FRIWO, headquartered in Ostbevern (DE), develops and produces digitally controllable power supply and drive solutions for futureoriented industries such as power tool technology, industrial applications, medical technology or electromobility.
The product portfolio includes technologically leading chargers, battery packs and power supply units as well as intelligent components for electric drive trains. The range of solutions extends from the display, motor control and drive unit to the control software.
Contact Details
FRIWO Gerätebau GmbH Headquarters
Von-Liebig-Straße 11, 48346 Ostbevern, Germany
Phone: +49-25-32-81-0
Fax: +49-25-32-81-112
Email: hello@friwo.com
Embedded
Download Line Card
Document
