FRIWO - Jack connectors - Angled Jack Connector 3,5mm
Additional information
- Outdoor Diameter: 3,5
- Shape: Angled
More Product Information
- S-parameters DC to 40 GHz, single-ended and mixed-mode
- Impedance Profile with <1 mm resolution, differential and common-mode
- Internal, automatic OSLT calibration
- USB-connected, small, lightweight
- Flexible display of the measurements
- Remove effects from fixtures, connectors and cables
- Emulate eye diagrams with CTLE, DFE and FFE equalization
- Advanced jitter analysis
Southwest Microwave’s high performance End Launch connectors are designed to provide low VSWR, mode free wideband response to 110 GHz for single-layer and multi-layer printed circuit boards where the high frequency signal is on the top layer. Available in SMA (27 GHz), 2.92 mm (K) (40 GHz), 2.40 mm (50 GHz), 1.85 mm (V) (67 GHz) and 1.0 mm (W) (110 GHz).
Male and female options along with narrow body and bulkhead feed-through. Unique clamping mechanism accommodates board thickness up to .300” (7.62 mm). Robust, reusable and repairable. Multiple launch configurations provide the best possible match to circuit layout. Works on microstrip and grounded coplanar waveguide (GCPW) designs. Signal-layer microstrip and GCPW test boards available. Soldering is optional.
Design Assistance:
- Printed circuit board layout and connector part number recommendation
- 3D models for mechanical layout
- HFSS models (version 18.0 or newer) for EM simulations upon request and availability
-
High efficiency: up to 81.6 %
-
Low no load power consumption < 95 mW
-
Meets DoE efficiency level VI
-
CoC version 5 ready
-
Ultra-low leakage current ≤ 10 μA
-
IEC 60950-1, 4th edition ready
-
Wide operating temperature range 0 - 45°C
-
Double housing safety: snapped & welded
-
IP42 approved interchangeable plug system as additional accessories
-
Also available as version with fixed plugs: FOX6-F
Coaxial cable assembly suitable for fixed wiring inside and between equipment used in the microwave band up to 100GHz (continuous operating temperature range: -30 to +85°C).
These cables have excellent formability (shape-retention capability) that make wiring work easy and exhibit superior loss characteristics compared to semi-rigid cables. Standard connectors are SMA (m) straight connectors, although other connectors can be used as required.
-
Write your own code in ANSI C, as part of the FRIWO firmware.
-
Focus on developing your own applications and USPs:
-
Develop your own hill assist (application: eScooter)
-
Turn your motor control into a fan or pump control
-
Adapt CAN messages to your existing eScooter setup
-
Adapt CAN messages of your FRIWO Battery Pack
-
Use your own algorithms for field oriented control (coming soon)
-
Develop your own State of Charge (SOC) calculation within the BMS (coming soon)
-
-
Access to new modules to provide even more integration depth and possibilities for customization.
-
Monitor and change your own parameters within the FRIWO Enable Tool.
-
Advanced component protection against misconfiguration.
-
Easy rollout of your customized software for your eScooter fleet (Requirement: The eScooters run with MCU6000).
-
Access to Github Repository with detailed code samples.
-
High efficiency: up to 81.6%,
-
low no load power consumption <95mW,
-
meets DoE efficiency level VI,
-
CoC version 5 Tier 2,
-
ultra-low leakage current ≤10μA,
-
IEC 60601-1-2, 4th edition ready,
-
wide operating temperature range 0 - 45°C,
-
isolation 2x MOPP,
-
double housing safety: snapped & welded,
-
IP42 approved interchangeable plug system as additional accessories,
-
IEC 60601-1-11 ready with IPX2 adapter
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe 1.0, 2.0 and 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
Supports links of up to and including 4-lanes
-
NVMe SSD DUT (not supplied) plugs directly into the Interposer
-
Supplied with two high-performance custom cables for Analyzer attachment
-
Data path uses high-speed linear redrivers to ensure good signal capture with little or no tuning
-
Supports Analyzer side-band signal capture and triggering
-
Provides two differential clock connectors
-
Interposer power is independent of host system
-
A 120/220 AC in, 12V/3A DC output converter is included
-
LEDs give quick indicators of power and status
-
Format: Design based on 4-lane PCIe CEM specification
-
Supported by VIAVI Analyzer tools for trace capture with filter, trigger and more
-
Provides consistent, repeatable capture of link training, negotiation and other data
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
FRIWO
Based on 50 years of experience, FRIWO today has a global presence with modern development centres, production facilities and sales in Europe, Asia and North America. The FRIWO brand stands for innovative strength, security, safety, quality, and efficiency around the world. As proof of this, we are certified according to DIN ISO 9001 (Quality Management), DIN ISO 14001 (Environmental Management), and DIN ISO 13485 (Quality management for medical devices). At the end of the 2020 fiscal year, the company employed over 2,500 people worldwide and generated revenue of 99.4 million euros.
As an international system provider, FRIWO, headquartered in Ostbevern (DE), develops and produces digitally controllable power supply and drive solutions for futureoriented industries such as power tool technology, industrial applications, medical technology or electromobility.
The product portfolio includes technologically leading chargers, battery packs and power supply units as well as intelligent components for electric drive trains. The range of solutions extends from the display, motor control and drive unit to the control software.
Contact Details
FRIWO Gerätebau GmbH Headquarters
Von-Liebig-Straße 11, 48346 Ostbevern, Germany
Phone: +49-25-32-81-0
Fax: +49-25-32-81-112
Email: hello@friwo.com