FRIWO - LT100 LED Driver - LT100-24/4200
Product information "LT100"
Whether minimum housing cross sections, anti-vandalism in-wall installations or safety class IP67 for damp and dusty environments – with our technically leading LED drivers you are always on the safe side. In compliance with various standards such as CE, ENEC or EN61347 we realize current and voltage control in a single device and enable a comfortable lighting control via DALI or PushDIM with our DIMMbox.
If our standard program does not meet your requirements, your particular output values can be adjusted by laser trimming. Find now your tailored solution together with our specialists!
Additional information
- Output voltage: 24 V
- Family : LT100
- Current: 4200 mA
- Output voltage tolerance: +2% / -2%
- Frequency: 50 / 60 Hz
- AC Input: connecting bracket 0,5...1,5 mm²
- Humidity: 10%- 95%
- Working temperature: 0°C - 45°C
- Standard 1: EN61347-2-13
- Standard: IEC61347-1
- Storage temperature: -40°C - 70°C
- MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic )
- Input current: 480 (Ripple measured with 20MHz Bandwidth Oscilloscope and 0.1uF/50V ceramic capacitor and 10uF/50V aluminum electrolytic capacitor across the output terminal) mA
- DC output: connecting bracket 0,5...1,5 mm²
- Input tolerance: +10% / -10%
- Input voltage: 220-240 V
- Spec.0 cover sheet FW-Type: LT100-24/4200
- Protection Class: II
- color: White
More Product Information
-
Low noise GigE Vision InGaAs SWIR camera
-
VGA resolution
-
Power over Ethernet (PoE+)
-
large pixel with high dynamic
-
Strong sensor cooling, no condensation
-
Very strong sensor cooling for low-noise imaging with long exposure times
-
GigE Vision interface with PoE+
-
Comprehensive I/O control options
-
Automated on-board image correction
-
Extended operating temperature range
Fits into all standard in-wall junction boxes, easy and invisible mounting, safe against vandalism, many applications: Sanitary installations, security equipment, lighting, etc. Compact design Cost reductions by long lifetime and high efficiency
-
Supports link widths up to 16-lanes
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe 1.0, 2.0 and 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
A top edge 16-lane CEM slot connector accepts all endpoint DUT adapter cards
-
Bottom edge 16-lane PCB finger connector installs into host test system’s 16-lane PCIe slot
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Supports error injection for deep system analysis
-
Interposer power is independent of host system. A 120/220 AC in, 12V/3A DC out converter is included
-
Custom, exchangeable brackets enable secure chassis and endpoint card installations
-
LEDs give quick indication of power and operation
-
Format: Design is based on the 16-lane Card Electro-Mechanical (CEM) specification
-
Size: 230mm deep x 185mm tall x 15mm thick
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
-
30 ms measurement speed
-
Wide wavelength range
-
High PDL accuracy
-
OLED display and analog output
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe 1.0, 2.0 and 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
OCulink host and target connectors support PCIe links of up to and including 4-lanes
-
Supplied with two, high-performance SFF-8674 equivalent custom cables for Analyzer attachment
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Provided with Slimline 4-lane to 4-lane OCulink conversion cables
-
Two cables supplied for optional clocking sources
-
Interposer power is independent of host system.
-
A 120/220 AC in, 12V/3A DC output converter is included
-
LEDs give quick indication of power and operation
-
Works together with VIAVI Xgig 4K Analyzer platforms
-
Provides consistent, repeatable capture of link training, equalization negotiation and other data
-
Up to four Interposers are stackable to support wider length widths
-
Supports Jammer error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
-
Fiber optic delay line based test set supports all formats of radio altimeters
-
Portable ruggedized enclosure for flight line or benchtop use
-
Battery operated
-
Simulates static altitudes from 0* ft. to 10,000 ft. in 10 ft. steps (*minimum simulated altitude dependent upon AID and test cable length)
-
+20 dB of power level offset from nominal loop loss value
-
Touch-screen operation
-
Direct-connect to UUT T/R or installed system via antenna couplers
-
Broadest Model Selection: 6kW, 9kW, 12kW, 18kW, 24kW, 36kW, Additional standard models above 36kW, up to 250kW, are available.
-
Standard 60V, 120V, 400V, 600V, 800V and 1000V Voltage Ratings
-
PLW Models Offer Ultra-compact Footprint and Boasts one of the industry’s highest power densi- ties, 18kW in 2U.
-
Anti-condensation: Intelligent Fully-integrated Temperature Control Circuit and Solenoid Valve
-
Standard LabWindows and LabVIEW Drivers and SCPI Command Set
-
RoHS Compliant
-
High sensitivity
-
Rugged sensor package
-
Multipoint up to 128 sensors on a single HYPERION instrument
-
Various physical parameters measurements coupled onto the same fiber optic cable
-
Long distance, with 10’s of kilometers of coverage
-
Available mounting block for two and three axes
-
Compatible with Luna’s ENLIGHT software
-
NIR-enhanced
-
Power over Ethernet option
-
Angled-head and board level variants
-
Video-iris lens control
-
GigE Vision interface with Power over Ethernet option
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
FRIWO
Based on 50 years of experience, FRIWO today has a global presence with modern development centres, production facilities and sales in Europe, Asia and North America. The FRIWO brand stands for innovative strength, security, safety, quality, and efficiency around the world. As proof of this, we are certified according to DIN ISO 9001 (Quality Management), DIN ISO 14001 (Environmental Management), and DIN ISO 13485 (Quality management for medical devices). At the end of the 2020 fiscal year, the company employed over 2,500 people worldwide and generated revenue of 99.4 million euros.
As an international system provider, FRIWO, headquartered in Ostbevern (DE), develops and produces digitally controllable power supply and drive solutions for futureoriented industries such as power tool technology, industrial applications, medical technology or electromobility.
The product portfolio includes technologically leading chargers, battery packs and power supply units as well as intelligent components for electric drive trains. The range of solutions extends from the display, motor control and drive unit to the control software.
Contact Details
FRIWO Gerätebau GmbH Headquarters
Von-Liebig-Straße 11, 48346 Ostbevern, Germany
Phone: +49-25-32-81-0
Fax: +49-25-32-81-112
Email: hello@friwo.com