FRIWO - FOX6- XM-USB 2nd Gen Medical Power Supply 5V / 1400mA worldwide
-
High efficiency: up to 81.6%
-
Low no load power consumption <95mW
-
Meets DoE efficiency level VI
-
CoC version 5 Tier 2
-
Ultra-low leakage current ≤10μA
-
IEC 60601-1-2, 4th edition ready
-
Wide operating temperature range 0 - 45°C
-
Isolation 2x MOPP
-
Double housing safety: snapped & welded
-
IP42 approved interchangeable plug system as additional accessories
-
IEC 6060-1-11 ready with IPX2 adapter
Required Accessories
For the operation of this device you need a primary adapter. This can be found here: Primary adapters
Product information "FOX6- XM-USB 2nd Gen"
- IEC 60601-1 approved
- ≤ 10μA leakage current
- Protection class 2xMOPP
- DOE 2016 ready
- IP42 approved exchangeable plug system as additional accessories
- Double Safety: Housing snapped & welded.
Additional information
- Gehäuse / Housing: FOX6-X-USB
- Protection Class: II
- Output voltage tolerance: ± 5 %
- MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic)
-
Storage temperature
: -40 - 70 °C - Working temperature: 0°C - 45°C °C
- Humidity: 10 - 90 %
- AC Input: FRIWO interchangeable mains plug system: see Primary Adapters
- Input voltage: 100 - 240 V
- Input tolerance: ±10%
- Frequency: 50 / 60 Hz
- DC output: USB
- Unit: FOX6-XM-USB
- Current: 1400 mA
- Output voltage: 5 V
- Standard: IEC/EN/UL60601-1 3.1 Edition
- Family : FOX6-X-USB
- Input current: 160 - 80 mA
- leakage current: ≤10 µA
- Overload protection: Yes
- Short Ciruit protection: Yes
- Operating Altitude: ≤3000 m
- Means of Protection: Input Output 2xMOPP, Input - Ground 1xMOPP
- Dimension: 55x31.5x41 mm
- material: PC-ABS
- Spec.0 cover sheet FW-Type: FW8002.1MUSB/05
- Storage Humidity: 10 - 95 %
- Atmospheric pressure: 70 - 106 kPa
- Inrush current: <35
- Line Regulation: ±1
- Load Regulation: ±4
- Start-up-time: ≤2 sec.
- Hold up Zeit: >5ms(120V), >50ms (230V)
- Approbations: Europe, USA, Australia, Japan
- Housing Flame Class: UL 94 V0
- IP Rotection rating: IP40
- Weight: 68 g
- Condcted and Radiated Emmisions: N55032, EN55011, FCC15, Class B, EN60601-1-2
-
Immunity
: EN55024, EN60601-1-2 - Harmonics: EN61000-3-2
- Flicker noise: EN61000-3-3
- ESD (contact/ air): EN61000-4-2
- Immunity against radiated field: EN61000-4-3
- ETF/ Burst: EN61000-4-4
- Surge: EN61000-4-5
- Immunity against conducted disturbances: EN61000-4-6
- Voltage dips: EN61000-4-11
- Immunity against magnetic field: EN61000-4-8
- Drop test: Standard: IEC 60068-2-32, Surface: steel, Drop height: 1 m, Numbers of Drops (total): 3
- Vibration: Standard: IEC 60068-2-6, Frequency range : 10 – 500 Hz, Cross- over-frequency : 58 – 62 Hz, Displacement amplitude : 0.2mm, Peak acceleration : 3 g, Number of cycles: 10 per axis
- color: black
Document
Document
More Product Information
-
IMX273 CMOS sensor
-
ALVIUM image processing
-
USB3 Vision
-
Various hardware options
-
Monochrome (1800 U-158m) and color (1800 U-158c) models
-
ALVIUM® Technology for on-board image processing
-
USB3 Vision interface for GenICam SFNC features
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Micro-B USB 3.1 Gen 1 connector with screw locks for industrial applications
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for both embedded and machine vision applications
See Specifications & Details tab for additional information
All of FRIWO's standard devices are delivered with a 1.83-meter secondary cable. At the end of this cable there is a coupling for the proven secondary adapter system. A range of easy-to-mount coaxial and jack connectors makes the system extremely flexible for use in a wide range of applications. The required polarity can be achieved by reversing the secondary connector. Custom cables can also be installed. Our experts are always happy to help you choose what you need.
-
DALI2 (Digital Addrassable Lighting Interface) and PUSH-DIM (control with push button) functionality
-
Automatic detection of the kind of the control signal
-
Dimming control range covers 1% to 100% intensity and 0% in the OFF position
-
High efficiency: up to 88%
-
Minimal housing cross section: 21 x 30 mm
-
Wide operating temperature range -20...45°C
-
Driver equipped with thermal protection
-
This device is suitable for installing on or in furniture
-
Driver is suitable for emergency lighting purposes regarding IEC61347-2-13 annex J.
-
This device is suitable for high-risk area lighting
-
Protective covers as additional accessories
See Specifications & Details tab for additional information
The company's IP42 splash-proof adapters featuring IP42-certified splash protection, which are available from FRIWO for the FOX system, are a particular highlight.
See Specifications & Details tab for additional information
-
IEC 60601-1 approved
-
≤ 10μA leakage current
-
Protection class 2xMOPP
-
DOE 2016 ready
-
IP42 approved exchangeable plug system as additional accessories
-
Double Safety: Housing snapped & welded
-
DC Voltage up to 100.0000 V, 20 ppm
-
DC Current up to 50.0000 mA, 50 ppm
-
Reference temperature range 13–33 °C
-
Resistance, frequency, RTD
-
TC simulation R, S, B, J, T, E, K, N, M, C, D, G2
-
GPIB, USB, RS-232 and ethernet interface
FRIWO
Based on 50 years of experience, FRIWO today has a global presence with modern development centres, production facilities and sales in Europe, Asia and North America. The FRIWO brand stands for innovative strength, security, safety, quality, and efficiency around the world. As proof of this, we are certified according to DIN ISO 9001 (Quality Management), DIN ISO 14001 (Environmental Management), and DIN ISO 13485 (Quality management for medical devices). At the end of the 2020 fiscal year, the company employed over 2,500 people worldwide and generated revenue of 99.4 million euros.
As an international system provider, FRIWO, headquartered in Ostbevern (DE), develops and produces digitally controllable power supply and drive solutions for futureoriented industries such as power tool technology, industrial applications, medical technology or electromobility.
The product portfolio includes technologically leading chargers, battery packs and power supply units as well as intelligent components for electric drive trains. The range of solutions extends from the display, motor control and drive unit to the control software.
Contact Details
FRIWO Gerätebau GmbH Headquarters
Von-Liebig-Straße 11, 48346 Ostbevern, Germany
Phone: +49-25-32-81-0
Fax: +49-25-32-81-112
Email: hello@friwo.com
Embedded
Download Line Card
Document
