The Low Frequency Tuner (LFT) is a unique product technology using M algorithms for low frequency wideband tuning. Three or more cascaded tuning sections use series transmission cables and parallel rotary capacitors. The length of the cables and number of tuning sections are optimized for maximum tuning range over a given bandwidth. HLFT tuners use 6 tuning sections allowing second harmonic frequency tuning.

• Vector Network Analyzer Frequency Range from 10 MHz up to 3.2 GHz
• Spectrum Analyzer Frequency Range from 9 kHz up to 3.2 GHz
• -156 dBm/Hz Displayed Average Noise Level (Typ.)
• -98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.)
• Total Amplitude Accuracy < 1.2 dB
• 1 Hz Minimum Resolution Bandwidth (RBW)
• All-Digital IF Technology
• Standard Preamplifier
• Distance to fault capability using VNA time domain analysis
• Up to 1.5 GHz Tracking Generator Kit
• Built-in Advanced Measurement capability (CHP, ACPR, OBW, CNR, TOI, etc)
• 10.1 lnch WVGA (1024 x 600) Display

Focus Microwaves provides modular microstrip, high-power, and ultra-low-loss coaxial fixtures designed for load pull testing of packaged transistors. Equipped with TRL calibration standards, these fixtures support transistor packages from under 0.1” to 1” wide. Special features include decade-wide Klopfenstein transformers (Fmax:Fmin ~10:1), water- and air-cooling options, and on-substrate bias networks. Microstrip fixtures (PTJ-x*) offer 50Ω lines, λ/4 or taper transformers, harmonic traps, and DC bias networks, while Minimum Loss coaxial Test Fixtures (MLTF-x*) feature low insertion loss (< 0.03 dB at 2 GHz) with connectors including 7mm, N, and 7/16, spanning up to 18 GHz. Both types support water cooling for RF power up to several hundred Watts.

• Tiny “all-in-one” solution: no external control board needed 
• Superior image quality: sub-micron lens movement with very low tilt. Now with higher dynamic stability 
• Low voltage & power: 3.3 VDC input, zero power position hold 
• Simple system integration: accepts high-level motion commands over standard serial interface (I2C or SPI) 
• Flexible, production-ready system: compatible with M8 to M16 lenses and with typical image formats from 1/3” to 1/1.8” 
• Lowest cost, fastest time to market: Fully-engineered “plug and play” solution

Junkosha’s new mmWave VNA Test Cable Assembly exhibits excellent phase (within +/- 4.5˚ at 50 GHz), and amplitude (within +/- 0.08 dB at 50 GHz) stability in flexure alongside strong phase stability in temperature through its 50 GHz bandwidth, available with NMD connector.

The assembly also displays impressive performance durability, surpassing 40,000 tick tock cycles during testing. The cable is bent 180˚ on a 2.25” radius mandrel with ease, demonstrating superior flexibility and no spring back. A ruggedized port side NMD connector is also available to ensure reliable connections to the VNA.

Focus Microwaves' Harmonic Tuners are engineered to enable precise control of impedance at the fundamental and harmonic frequencies (typically f₀, 2f₀, and 3f₀), making them essential for nonlinear device characterization and power amplifier design.

These tuners feature multiple cascaded probes within a single tuner body, allowing independent or simultaneous tuning at multiple frequencies. Their robust design ensures high tuning accuracy, minimal insertion loss, and excellent repeatability across a broad frequency range. Harmonic tuners are the ideal solution for advanced Load Pull measurements where harmonic control is critical.

Three phase electric power/energy calibrator with power quality functions for calibration and testing of grid measuring appliance like power meters, power transducers or power quality analysers.

• Power quality and energy functions
• 0.01° phase shift accuracy
• 15 - 1000 Hz output
• Built-in multimeter for transducer calibration
• Floating current outputs for 3-wire power meters
• Voltage from Current function

• Complete solution - battery test, simulation & solar array simulator software included 
• Highest power density up to 37 kW in 4U rack height (9.25 kW/U) 
• Fastest and cleanest power available (fastest transient response and low output ripple and noise) 
• Universal 3-Phase AC Input accepts 180 VAC to 528 VAC 
• Longest manufacturer-based reliability guarantee: 5-year warranty 
• Parallel system power up to 1.2 MW 
• Output voltage up to 2,000 V 
• Bidirectional output current up to ±150 A, up to ±4,800 A in parallel 
• True extended wide-range autoranging output 
• Regenerative to 95% 
• Color touch panel user interface 
• Seamless transition between source and sink 
• Built-in islanding detection

Focus Microwaves' DLP (Dynamic Load Pull) is a cutting-edge platform for active load pull measurements, optimized for accuracy, speed, and reliability. Supporting frequencies up to 40GHz and beyond, it offers a versatile solution for CW and pulsed signal applications. The DLP enables fundamental and harmonic tuning, time domain measurements, and advanced behavioral modeling. With integrated options for DC IV and pulsed IV measurements, this one-box system is ideal for all stages of device characterization and testing, from initial development to final product testing. Its intuitive interface and industry-leading calibration techniques ensure precise and efficient measurements.