Overview
Specifications & Details
Datasheets & Downloads
Videos

High Power Density (2 VA/cubic inch)
Single or multi-phase output
Parallel operation
4.8 Crest factor
Digital control loop technology
≥0.95 PFC
Brown-out simulation
AC 875 VA
45 to 5000 Hz
Universal AC/DC input via mainframe
User configurable
Simple integration

Manufactured By: AMETEK Programmable Power

More

ReFlex Power™ is a high density, modular programmable power system providing DC, AC and electronic load assets all under control of a single controller. It provides a reconfigurable, flexible platform ideal for ATE and production test environments where RFP™ can provide programmable stimulus and bias power as well as programmable loads for the device(s) under test. The EIA 4U high RFP™ mainframe can hold up to 12 single-slot modules or combinations of single, dual and triple slot wide modules to configure (or reconfigure) the system for the particular requirements at hand. The mainframe can support up to 6 kW of output power.

Up to 8 mainframes, potentially up to 95 modules, can be controlled via a single controller. The controller communicates to the individual modules via a high speed proprietary bus protocol, providing very high data rates and a high degree of deterministic control. The RFP™ controller communicates to the host controller via an Ethernet LAN connection designed to be compliant with the LAN Extension for Instrumentation ( ™ ) standard, assuring interoperability and ease of integration. RFP™ system modules can be combined via the controller, permitting the creation of “virtual assets” with the voltage/current combinations required for a particular test regime. Creating “virtual assets” reduces the “logistical tail” and total cost of ownership.

Available power modules include

Single slot, 330 Watt programmable DC supplies
- 16V, 20.6A
- 65V, 5.1A
Dual slot, 1kW programmable DC supplies
- 33V, 30A
- 50V, 20A
- 50V, 25A
- 120V, 8.3A
- 450V, 2.3
Triple slot, 875 VA, single phase, programmable AC supply
- Dual range: 280V(rms), 3.5A(rms)
- Dual Range: 140V(rms), 7A(rms)
Triple slot, 500V, programmable electronic DC loads
- 15A, 375 Watt
- 30A, 750 Watt

The mainframe provides internal power distribution, cabling, I/O and power connection and rack mounting for 12-asset slots. The mainframe also supplies the signal and control bus fabric supporting multi-module series/parallel operation, complex triggering, fault I/O and inter-mainframe control infrastructure.

AC Power Modules General Specifications
Current, Maximum	140V Range 7A, not to exceed 875 VA, Overload 10A for 0.5 Seconds
Current, Maximum	280V Range 3.5A, not to exceed 875 VA, Overload 5A for 0.5 Seconds
Frequency	45-1200 Hz, up to 5 kHz optional
Crest Factor	4.8 X FS rms current
Load Regulation	100% Resistive Load effect (<100 msec) Voltage Mode 0.5% of FS Current Mode 0.1% of FS
Line Regulation	10% Line effect (< 100ms) Voltage Mode 0.1% of FS Current Mode 0.1% of FS
Programming Accuracy	Voltage 0.1% of FS + .2%/kHz Current +/-(0.5% + 0.75%/kHz) of full-scale Frequency 0.01% of setpoint
Programming Resolution	Voltage 0-140VAC 9mV, 0-280 18mV Current 2.2mA Frequency 0.1Hz thru 1kHz; 0.5Hz thru 5KHz
Temperature Coefficient	Voltage .05% of FS per °C Current .05% of FS per °C
Distortion	<1% to 500Hz <2% to 2KHz <5% to 5KHz
Output DC Offset	±0.1Vdc maximum
Efficiency	72%
RMS Noise	55dB below full-scale Input (via RFP Mainframe) Inrush Current 8.8A at 115Vac; 17.6A at 230Vac 14.6A at 270Vdc
Power Factor	0.95 typical
Hold-up Time	10ms
Remote Sense	0.75Vrms per line Input
Overvoltage Protection	Range: 1.4% to 110% Accuracy: 2% of setpoint
Overcurrent Protection	Range: 0.4% to 106% Accuracy: 3% of setpoint
Auxiliary AC Output	Isolated 0Vac to 31.6Vac, 2A max proportional to AC output
Cooling	Forced air convection, req. 40CFM airflow at altitude and ambient temperature
Multi Phase Parallel	Up to 6 in a group
Phase Programming Range	0-360 degree; counterclockwise phasor rotation is assumed, therefore the phase angle offset is lagging the master reference.
Phase Programing Accuracy	1 degree plus 1°C/kHz for balanced resistive load measured with respect to A-phase, at 25 degree C, +/- 5 degree.
Remote Programming Connector	9-pin D-sub
Output Connector	Combination signal/power contact subminiature D (Mating connector kit available)
Physical	3 RFP™ slots wide 4.2” (106.7mm) W 6.75” (171.5mm) H 15” (381 mm) D
Weight	13 lbs (5.9 Kilograms)

All specifications: 25°±5°C.

All specifications are subject to change

AMETEK ReFlex Power Datasheet.pdf

AMETEK ReFlex Power Cut Sheet.pdf

Manuals, Software, Drivers and Other

View YouTube Channel

Elgar - ReFlex Power 875VA AC Power Source Module