AVT - Guppy PRO F-503 Industrial CMOS camera, 5 Megapixels
-
Compact 5 MP camera
-
ON Semiconductor (Aptina) CMOS sensor
-
Excellent price/performance
-
13 fps
-
Various IR cut/pass filters
-
White medical housing
The Guppy PRO F-503B/F-503C is an industrial CMOS camera with 5 Megapixel resolution. It is equipped with an ON Semiconductor (Aptina) sensor and runs 13 frames per second at full resolution.
Specifications
Interface
IEEE 1394b - 800 Mb/s, 1 port
Resolution
2588 (H) × 1940 (V)
Sensor
ON Semi MT9P031
Sensor type
CMOS
Sensor size
Type 1/2.5
Pixel size
2.2 µm × 2.2 µm
Lens mount (default)
C-Mount
Max. frame rate at full resolution
13 fps
ADC
12 Bit
Output
Bit depth
8-12 Bit
Monochrome pixel formats
8/12/16
Raw pixel formats
8/12/16
Operating conditions/dimensions
Operating temperature
+5 °C to +45 °C
Power requirements (DC)
8 V to 36 V
Power consumption
<3.5 W (@ 12 VDC)
Mass
80 g
Body dimensions (L × W × H in mm)
44.8 × 29 × 29 (including connectors)
Regulations
CE: 2014/30/EU (EMC), 2011/65/EU, including amendment 2015/863/EU (RoHS); FCC Class B
Features
- Look-up table (LUT)
- Gamma correction
- Color correction
- Defect pixel correction
- Area of interest (AOI), separate AOI for auto features
- Binning (monochrome and color)
- Low-noise binning
- Sub-sampling
- Image mirror H+V (color version only horizontal)
- Auto gain (manual gain control: 0 to 18.06 dB)
- Auto exposure (20 µs to 22.3 s)
- Trigger with edge mode and programmable delay
- Storable user sets
Scope of delivery
- Camera and IEEE 1394b cable (other configurations on request)
Applications
Thanks to the CMOS sensor and 5 Megapixel resolution, the Guppy PRO F-503B/F-503C is an industrial CMOS camera with a high performance and a very attractive price.
Applications:
- Industrial inspection with high resolution
- Robotics
- Logistics
- Pharmaceutical industry
- Multimedia
- ITS/Traffic monitoring
Quantum efficiency
Document
Document
Document
Technical papers, knowledge base
3D CAD files (STEP)
Please right-click the link of a 3D camera model and select save as to download the file. After downloading, unzip the STEP file. You need a 3D CAD viewer application to view and measure the STEP files. Download a STEP viewer free of charge: https://www.freecadweb.org/
Software and firmware
Vimba is our current future-proof SDK.
You can also download legacy software for 1394 cameras.
To obtain firmware for your 1394 camera, please contact our technical support team.
More Product Information
- S-parameters DC to 40 GHz, single-ended and mixed-mode
- Impedance Profile with <1 mm resolution, differential and common-mode
- Internal, automatic OSLT calibration
- USB-connected, small, lightweight
- Flexible display of the measurements
- Remove effects from fixtures, connectors and cables
- Emulate eye diagrams with CTLE, DFE and FFE equalization
- Advanced jitter analysis
With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.
Impedance Standard Substrates (ISSs) supports all of your high-frequency probing applications. Using them ensures greater accuracy and better repeatability in on-wafer calibration of vector network analyzers. Our ISSs offer the proven accuracy of LRRM calibrations with automatic load inductance compensation.
An impedance tuner is an apparatus, which generates controllable reflection factor (Impedance) over a certain frequency range. Focus uses two basic technologies:
a) For frequencies from 100MHz to 110GHz (and above) we use the slide screw technique (models Multi Harmonic MPT, wideband (fundamental) CCMT, harmonic rejection PHT), in which a reflective probe (slug) is inserted into the slot of a low loss slotted transmission line (slabline or waveguide).
b) For frequencies from below 10MHz to 170MHz we use a lumped element technology (models LFT), whereby variable capacitors are connected with optimized lengths of coaxial cable.
-
Enables wafer probing up to 100 A pulsed and 10A DC
-
Innovative multi-fingertip design provides even distribution of current
-
Supports up to 500 V
-
Replaceable Tungsten probe tips
-
Temperature range of -60°C to 300°C
-
Minimal contact resistance at the pad-tip junction to reduce heating during measurements, with fewer probe marks
-
Prevents against thermal runaway
-
Measure devices on wafer at higher currents than ever before
-
Small scrub minimizes damage to aluminum pad
-
Small footprint – tip fits on a 1 mm pad
-
Defect pixel correction (on/off)
-
Fixed pattern noise correction (on/off)
-
Region of interest (ROI)
-
Gain (manual control, 0 to 20 dB)
-
Exposure (manual control, 44.2 µs to 1.4 s)
-
Gamma correction
-
Reverse X
-
DeviceLinkThroughputLimit (easy bandwidth control)
-
Sync out modes: Waiting for a trigger, exposing, readout, imaging
-
Storable user sets
- IRIG A & B, NASA 36 and 1 PPS inputs standard
- HaveQuick sync option
- Propagation delay compensation
- Zero latency time reads
- Match Time output
- IRIG B time code output
- External Event time tags
- On-board GPS receiver option
- User programmable heartbeat rate
-
IMX304 CMOS sensor
-
ALVIUM image processing
-
MIPI CSI-2 interface
-
Various hardware options
-
Monochrome (1800 C-1236m) and color (1800 C-1236c) models
-
ALVIUM® Technology for on-board image processing
-
MIPI CSI-2 interface with up to 4 lanes
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Hirose HR FHH55 FPC connector with minimum space requirements for a compact design
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for embedded vision applications
-
Easy-to-install driver and code examples
- Broadest Model Selection: 6kW, 9kW, 12kW, 18kW, 24kW, 36kW, Additional standard models above 36kW, up to 250kW, are available.
- Standard 60V, 120V, 400V, 600V, 800V and 1000V Voltage Ratings
- PLW Models Offer Ultra-compact Footprint and Boasts one of the industry’s highest power densities, 18kW in 2U.
- Anti-condensation: Intelligent Fully-integrated Temperature Control Circuit and Solenoid Valve
- Standard LabWindows and LabVIEW Drivers and SCPI Command Set
- RoHS Compliant
Allied Vision Technologies
For more than 30 years, Allied Vision has been helping people to reach their imaging goals. Allied Vision supplies camera technology and image capture solutions for industrial inspection, medical and scientific imaging, traffic monitoring and many more application areas in digital imaging.
With a deep understanding of customers’ needs, Allied Vision finds individual solutions for every application, a practice which has made Allied Vision one of the leading camera manufacturers worldwide in the machine vision market.
The company has nine locations in Germany, Canada, the United States, Singapore and China and is represented by a network of sales partners in over 30 countries.
Contact Details
Allied Vision
102 Pickering Way - Suite 502 Exton, PA 19341, USA
Phone: +1-877-USA-1394
Fax: +1 978-225-2030
Imaging/Machine Vision
Download Line Card
Document
